Search found 14 matches
- Thu Oct 15, 2015 12:52 pm
- Forum: Software
- Topic: Cleanflight aka Multiwii port to STM32 F10x and F30x
- Replies: 761
- Views: 1577611
Re: Cleanflight aka Multiwii port to STM32 F10x and F30x
Has anyone successfully tried the CUSTOMAIRPLANE setup on a CC3D board with LED_strip enabled on v1.10? I had a try last night and could not get my elevator servo (servo2) to function on pin 6 of the CC3D board. I used the following setup: PINS: SERVO OUTPUT CONNECTOR: 1 MOTOR 2 AILERON 3 AILERON 4 ...
- Mon Mar 09, 2015 2:06 pm
- Forum: FPV, OSD, Cameras
- Topic: DIY FPV PCB's
- Replies: 0
- Views: 2881
DIY FPV PCB's
Just thought I'd post my collection of FPV PCBs for anyone interested in building there own budget 5.8Ghz system. The boards are built around the Boscam RX5008 and TX5823 modules. There are two receiver boards, one using a DIP switch to change channels, the other incorporates the RX5808-PRO project ...
- Tue Jan 27, 2015 1:37 pm
- Forum: Software
- Topic: Cleanflight aka Multiwii port to STM32 F10x and F30x
- Replies: 761
- Views: 1577611
Re: Cleanflight aka Multiwii port to STM32 F10x and F30x
JamieHarwood wrote:Hi,
Is there a www page where I can see what is going in to the next build of CleanFlight?
https://github.com/cleanflight
- Mon Jan 26, 2015 11:22 am
- Forum: Boards
- Topic: Naze32 Rev5 schematic / 3v3 Regulator part number needed.
- Replies: 3
- Views: 3042
Re: Naze32 Rev5 schematic / 3v3 Regulator part number needed
Replacing the old diode with a bat54c fixed the board.
- Sat Jan 24, 2015 10:07 pm
- Forum: Boards
- Topic: Naze32 Rev5 schematic / 3v3 Regulator part number needed.
- Replies: 3
- Views: 3042
Naze32 Rev5 schematic / 3v3 Regulator part number needed.
Hi all, The switchmode PSU on my quad crapped out and fried the regulator and diode on my Naze32 board. I could really do with the part number for the 3v3 sot23-5 regulator next to the motor output header and also the sot23 diode that sits between the 5v line on the header and the regulator next to ...
- Sat Jan 24, 2015 1:19 am
- Forum: FPV, OSD, Cameras
- Topic: Mavlink OSD V2 and MWOSD R1.2 not playing nice!
- Replies: 3
- Views: 4096
Re: Mavlink OSD V2 and MWOSD R1.2 not playing nice!
I noticed that there is a mwosd v1.3 release candidate in the downloads section, I will try that soon and see if it works properly. I'm still running v1.1 at the moment, have given up with v1.2.
- Wed Jan 14, 2015 11:26 am
- Forum: Pictures & Videos
- Topic: Budget Quad build - Hovership MHQ2 - Naze32 - Cleanflight!
- Replies: 3
- Views: 2822
Re: Budget Quad build - Hovership MHQ2 - Naze32 - Cleanfligh
If you're gonna print the clean-lower_7mm-vibe-mount_short make sure you print the hovership gopro mobius platform to go with your Tilt-10.
(sorry im not near my PC or printer at the moment) Im making the assumption that the clean lower short and camera mount are seterate items.
(sorry im not near my PC or printer at the moment) Im making the assumption that the clean lower short and camera mount are seterate items.
- Wed Jan 14, 2015 11:17 am
- Forum: Pictures & Videos
- Topic: Budget Quad build - Hovership MHQ2 - Naze32 - Cleanflight!
- Replies: 3
- Views: 2822
Re: Budget Quad build - Hovership MHQ2 - Naze32 - Cleanfligh
You will want to print 6 or 8 arms and maybe x4 landing, just in case you crash. Your list does contain all of the parts to build a copter though, you haven't missed anything. I chose the V3 arms on my build, you may consider the longer arms (XL arms) if you ever want to run 6" props. I printed...
- Sun Jan 11, 2015 5:15 pm
- Forum: FPV, OSD, Cameras
- Topic: Mavlink OSD V2 and MWOSD R1.2 not playing nice!
- Replies: 3
- Views: 4096
Mavlink OSD V2 and MWOSD R1.2 not playing nice!
Hi all, I have just received my Mavlink OSD v2 board and I'm having trouble getting the MultiWii OSD R1.2 software working. I have successfully flashed the R1.1 version and that works fine... however after uploading the R1.2 sketch, all I get is a grid of dots (.) on the display which disappear abou...
- Tue Jan 06, 2015 2:01 pm
- Forum: General discussions
- Topic: Completely NEW
- Replies: 4
- Views: 3915
Re: Completely NEW
You should watch hour upon hour of Youtube videos followed by reading every multiwii post you come across. Google "multiwii setup" and read everything you come across, take notes in a notepad..... it will all come together in the end. Also break your posts down into manageable chunks and p...
- Sat Jan 03, 2015 5:11 pm
- Forum: Pictures & Videos
- Topic: Budget Quad build - Hovership MHQ2 - Naze32 - Cleanflight!
- Replies: 3
- Views: 2822
Budget Quad build - Hovership MHQ2 - Naze32 - Cleanflight!
This is my progress, so far building a mini 250 FPV quad copter.... I started by downloading and printing the Hovership MHQ2 frame from Thingiverse. m (sorry... images as links, been having trouble embedding images that don't get cropped, deleted, etc) http://goo.gl/LSnMVH?gdriveurl I had to route m...
- Sat Jan 03, 2015 3:14 pm
- Forum: Software
- Topic: Cleanflight aka Multiwii port to STM32 F10x and F30x
- Replies: 761
- Views: 1577611
Re: Cleanflight aka Multiwii port to STM32 F10x and F30x
HI All, I stumbled across this device the other day, NXP PCA9685 and wondered if it would be possible to integrate it into the Cleanflight code for driving extra servos on flight controllers that don't have any spare pins? I thought it might be a good option for folks who want retractable landing ge...
- Sat Dec 06, 2014 7:11 pm
- Forum: Software
- Topic: Cleanflight aka Multiwii port to STM32 F10x and F30x
- Replies: 761
- Views: 1577611
Re: Cleanflight aka Multiwii port to STM32 F10x and F30x
Mattmax, buy your self a cleanflight compatible flight controller board and save your self a massive headache, use your dev board for bench testing instead. If your gonna do it the hard way, find the schematics for a comparable fc board to your dev kit and start reading lots of data sheets.
- Sat Dec 06, 2014 2:55 pm
- Forum: Software
- Topic: Cleanflight aka Multiwii port to STM32 F10x and F30x
- Replies: 761
- Views: 1577611
Re: Cleanflight aka Multiwii port to STM32 F10x and F30x
Hi all, I'm totally new to Cleanflight, Ive ordered my Nase32, printed my MHQ2 frame and will be buying the rest of my parts over the next month or so. Just like to say thanks to Dominic and everyone else who is helping out with this project. Is there any chance of getting jeti telemetry? If anyone ...