MultiWii

Hello, I need help. I tested Naze32 GPS functions. I have RY825AI GPS module connected to Naze. If I activate the GPS HOLD so copter trying to hold the position but it is not accurate, drift + -10 meters in all directions .. What should I adjust the settings in unit the copter and held the position ...

So I understand correctly, base flight is the GUI that TimeCop approves/helped to dev. Cleanflight is a GUI developed by a different group, and isn't approved by TimeCop? GUI is only configuration software.. The Baseflight has GUI and for Cleanflight has GUI.. Baseflight is product TimeCop and Clea...

Incorrect...it has 4: Port1 is a hardware UART.When USB is connected,it uses that port...it can be used for BT,OSD, orTelem, when not connected to USB. Port2 is also hardware and is used for gps on pins 3/4 when cppm is used, which also allows use of two software bitbanged serial ports on pins 5/6 ...

Hello, first thank for super work on this project TimeCop. But I have small problem. If choice receiver PPM and activate Sonar (connect on RC input pins 7 trig and 8 to echo, voltage level is 3,3V) will blocked USB communication (Baseflight GUI). If I disconnected Sonar from pins 7,8 and restart FC,...