OK I had some news of Jean Gab. I can't explain you but for the moment he can't continu developpement and other.
I whish him to be better rapidly.
Thanks for all that are working on this OSD !
Search found 187 matches
- Sun Jan 06, 2013 7:08 pm
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
- Tue Aug 07, 2012 4:17 pm
- Forum: Software development
- Topic: GPS Direction to home
- Replies: 0
- Views: 863
GPS Direction to home
Actually I work on Rushduino GPS and the direction to home.
Can you confim me that the serial data GPS_Direction_to_home is :
- center on the north (N = 0°, W = -90°, E = 90°) ?
- indicate the absolute direction to home but not the direction relative to heading ?
- heading is N=0°, W = 270°, E = 90°
Can you confim me that the serial data GPS_Direction_to_home is :
- center on the north (N = 0°, W = -90°, E = 90°) ?
- indicate the absolute direction to home but not the direction relative to heading ?
- heading is N=0°, W = 270°, E = 90°
- Fri Aug 03, 2012 2:43 pm
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 898768
Re: GPS integration
Hello Eosbandi, i have the following gps board from adafruit that uses a MTK3339 chip: m. I would like to ask you if this is compatible whith I2C gps. If it is, can i flash it with MTK3329 firmware? If not is it going to be in your future plans? Thanks in advance! George yes it's work (it's what I ...
- Tue Jul 31, 2012 4:25 pm
- Forum: Software development
- Topic: Ellipsoid into Sphere Calibration of Acc and Magn
- Replies: 17
- Views: 8104
Re: Ellipsoid into Sphere Calibration of Acc and Magn
my opinion : "Wahooooooooooooooooooooooooo" looks really great !
- Tue Jul 31, 2012 3:55 pm
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
Re: Rushduino OSD - Multiwii based open software osd
really strange !!! you never have the arrow ????
I don't have this bug.
Try to reload the mcm file
I don't have this bug.
Try to reload the mcm file
- Tue Jul 31, 2012 9:44 am
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
Re: Rushduino OSD - Multiwii based open software osd
palton wrote:Any settings in MW, like enabling LCD telemetry or any specific LCD config that is required in MW?
no it's a bug, I have to find where is
- Mon Jul 30, 2012 8:50 am
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
Re: Rushduino OSD - Multiwii based open software osd
For PID menu I can't test but I purhaps find the problem. in config.h : // STICK POSITION #define MAXSTICK 1900 #define MINSTICK 1000 #define MINTROTTLE 1220 change to // STICK POSITION #define MAXSTICK 1800 #define MINSTICK 1100 #define MINTROTTLE 1220 to activate menu : - PITCH FULL - YAW FULL - T...
- Mon Jul 30, 2012 8:30 am
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
Re: Rushduino OSD - Multiwii based open software osd
BUG LIST :
- PID menu, impossible to go in - confirmed
- Home arrow, down position we see niumber 11 - to confirm
- Amperage sensor, to test (skytor code)
- Sencond batt - to implement (skytor code)
- PID menu, impossible to go in - confirmed
- Home arrow, down position we see niumber 11 - to confirm
- Amperage sensor, to test (skytor code)
- Sencond batt - to implement (skytor code)
- Thu Jul 26, 2012 8:45 am
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
Re: Rushduino OSD - Multiwii based open software osd
yes for donation you can send I at my adress
Can you test the arrow of direction to home, I am not sure it's ok and I can't test this week
Can you test the arrow of direction to home, I am not sure it's ok and I can't test this week
- Tue Jul 24, 2012 4:25 pm
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
Re: Rushduino OSD - Multiwii based open software osd
it's something link "add members" but I don't know how to admin a google repository.
Is someone can help us ?
Is someone can help us ?
- Tue Jul 24, 2012 3:58 pm
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
Re: Rushduino OSD - Multiwii based open software osd
yes but you ahev to open the SVN on google for other developpers. For the moment we just can download but not upload
- Tue Jul 24, 2012 2:01 pm
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
Re: Rushduino OSD - Multiwii based open software osd
I think is an excellent idea. Faster and better
- Tue Jul 24, 2012 12:35 pm
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
Re: Rushduino OSD - Multiwii based open software osd
I can't release for him but I had send a e-mail.
- Wed Jul 18, 2012 10:11 am
- Forum: Ideas
- Topic: wishlist for v2.2 - CLOSED
- Replies: 150
- Views: 47511
Re: wishlist for v2.2
don't forget the excellent accro trainer mode (flip and loops on stable mode) : viewtopic.php?f=16&t=1944
and the VTAIL modes : viewtopic.php?f=8&t=2033&start=10#p18663
and the VTAIL modes : viewtopic.php?f=8&t=2033&start=10#p18663
- Wed Jul 18, 2012 8:45 am
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
Re: Rushduino OSD - Multiwii based open software osd
All is OK (on PAL). Johnny is testing the NTSC and he release this version
- Sat Jul 14, 2012 1:38 pm
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
- Fri Jul 13, 2012 5:20 pm
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 898768
Re: GPS integration
Great job EOSBandi.
Just 1 think: is it possible de add a #define for the Led pin
#define LedPin 13
Because for exemple on the Rushduino GPS the led pin is on 2
Thanks
Just 1 think: is it possible de add a #define for the Led pin
#define LedPin 13
Because for exemple on the Rushduino GPS the led pin is on 2
Thanks
- Thu Jul 12, 2012 9:21 pm
- Forum: Software development
- Topic: try to release 2.1: based on r976
- Replies: 34
- Views: 15361
Re: try to release 2.1: based on r976
Hi, Thanks for this, but some checks must obviously be done to be sure of this mod. So too late for 2.1, but ok for after. If you don't integrate this mod, plz go back to the last mix or just replace it by Y4 with YAW correction because the actual mix on RC2 is not working on most actual VTAIL conf...
- Thu Jul 12, 2012 3:48 pm
- Forum: Software development
- Topic: playing with acc-z altitude hold
- Replies: 44
- Views: 19056
Re: playing with acc-z altitude hold
Did you try to add filter on your Gyro and ACC ?
I use a CRIUS Lite and SE with defaut PID on baro and the result is just perfect (just add a little I)
Most of problem is because gyro is to mutch sensitive and the FC try to make corrections all the time so it's difficult to have a good altitude level
I use a CRIUS Lite and SE with defaut PID on baro and the result is just perfect (just add a little I)
Most of problem is because gyro is to mutch sensitive and the FC try to make corrections all the time so it's difficult to have a good altitude level
- Thu Jul 12, 2012 3:23 pm
- Forum: Software development
- Topic: try to release 2.1: based on r976
- Replies: 34
- Views: 15361
Re: try to release 2.1: based on r976
copterrichie wrote:I use Y4 for my VTail copters, it works great.
yes but you have set YAW @ -1 or did you invert your Rear motors ? The solution 1 is just to correct this little error and to have the same order for motors as a QuadX
The solution 1 is a Y4 with inverted YAW
- Thu Jul 12, 2012 3:18 pm
- Forum: Software development
- Topic: try to release 2.1: based on r976
- Replies: 34
- Views: 15361
Re: try to release 2.1: based on r976
Big warning for VTAIL : in the old version (2.0) the mix of VTAIL is for the most comun version : 2 differents moteurs or the same moteurs but smaller props rear. in the old version (2.0) they were a bug on the order of rear motors so we had to put YAW @ -1 In the 2.1 RC2 the mix is ONLY for a VTAIL...
- Wed Jul 11, 2012 3:34 pm
- Forum: Software development
- Topic: Let's try to release 2.1: second try based on r964
- Replies: 65
- Views: 25096
Re: Let's try to release 2.1: second try based on r964
No I had disarming 2 times during some special accro moves ... Now I always use switch to arm how have u managed to disarm while flying? its more or less impossible. you can only disarm when throttle at zero which (throttle at zero) also means that the copter will not react to any stickinput nor it...
- Tue Jul 10, 2012 5:00 pm
- Forum: Software development
- Topic: Let's try to release 2.1: second try based on r964
- Replies: 65
- Views: 25096
Re: Let's try to release 2.1: second try based on r964
yes you are true !
- Tue Jul 10, 2012 4:51 pm
- Forum: Software development
- Topic: Let's try to release 2.1: second try based on r964
- Replies: 65
- Views: 25096
Re: Let's try to release 2.1: second try based on r964
No I had disarming 2 times during some special accro moves ... Now I always use switch to arm
- Sat Jul 07, 2012 5:08 pm
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 898768
Re: GPS integration
the problem is not to be good enough, but it's not natural to make a gyro init to reset home position, isn't it ?
- Sat Jul 07, 2012 4:29 pm
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 898768
Re: GPS integration
I just had an idea for the RESET of home position.
Why not using the same switch as the switch for RTH activation but only when motors are not armed :
Why not using the same switch as the switch for RTH activation but only when motors are not armed :
Code: Select all
if (rcOptions[BOXGPSHOME]) && !armed)
{
GPS_reset_home_position();
}
- Thu Jul 05, 2012 6:51 pm
- Forum: Software development
- Topic: Yet another Android based naze32/multiwii 2.0 configurator
- Replies: 54
- Views: 27078
Re: Yet another Android based naze32/multiwii 2.0 configurat
as Patrick
Oh just I more question ... Is the google map working ? It don't work for me ...
Oh just I more question ... Is the google map working ? It don't work for me ...
- Thu Jul 05, 2012 6:43 pm
- Forum: Software development
- Topic: Yet another Android based naze32/multiwii 2.0 configurator
- Replies: 54
- Views: 27078
Re: Yet another Android based naze32/multiwii 2.0 configurat
one more thing,
To have PITCH/ROLL PID on 1 line is really a good idea, but on special models I sometime need to have different PID on pitch and roll.
Is it possible to have a option to select PITCH/ROLL PID on 1 or 2 lines.
Thanks a lot ! Your soft is a must have !
To have PITCH/ROLL PID on 1 line is really a good idea, but on special models I sometime need to have different PID on pitch and roll.
Is it possible to have a option to select PITCH/ROLL PID on 1 or 2 lines.
Thanks a lot ! Your soft is a must have !
- Wed Jul 04, 2012 8:41 am
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
Re: Rushduino OSD - Multiwii based open software osd
Yes we are working on a new release, we had wait for a stable serial protocol before finish it.
Stay tune
Stay tune
- Thu Jun 21, 2012 4:27 pm
- Forum: Software development
- Topic: New Multiwii Serial Protocol
- Replies: 409
- Views: 230754
Re: New Multiwii Serial Protocol
copterrichie wrote:Timing is critical, you are using a totally different method(MAX7456), we are using a LM1881 to detect the lines and both interrupt handlers are used. Serial.write is useless.
For sure with a video synchro you need to have a high refesh rate of video frame.
- Thu Jun 21, 2012 3:02 pm
- Forum: Software development
- Topic: New MWC OSD from GLB
- Replies: 3
- Views: 2195
Re: New MWC OSD from GLB
There is some screenshot. They use a MAX7456 like on Rushduino but on screen datas don't look to be the same.
It's not a Rabbit OSD but wait and see
It's not a Rabbit OSD but wait and see
- Thu Jun 21, 2012 2:07 pm
- Forum: Software development
- Topic: New Multiwii Serial Protocol
- Replies: 409
- Views: 230754
Re: New Multiwii Serial Protocol
The time is not really critical on OSD. The refresh rate is very slow to have time to read on screen informations.
NOTA : Alex can you upgrade the protocol description on the first page plz ?
NOTA : Alex can you upgrade the protocol description on the first page plz ?
- Thu Jun 07, 2012 4:44 pm
- Forum: Software development
- Topic: GPS on Crius SE board
- Replies: 121
- Views: 72772
Re: GPS on Crius SE board
it's looks to exist a software solution :
from here : http://www.arduino.cc/cgi-bin/yabb2/YaB ... 250663814/
Code: Select all
see the following code snippet from user HULK
void(* resetFunc) (void) = 0; //declare reset function @ address 0
...
resetFunc(); //call reset
...
from here : http://www.arduino.cc/cgi-bin/yabb2/YaB ... 250663814/
- Thu Jun 07, 2012 9:32 am
- Forum: Software development
- Topic: Multiwii Documentation Wiki
- Replies: 74
- Views: 20203
Re: Multiwii Documentation Wiki
yes I know but I don't speak english as well as french
- Wed Jun 06, 2012 9:46 am
- Forum: Software development
- Topic: Multiwii Documentation Wiki
- Replies: 74
- Views: 20203
Re: Multiwii Documentation Wiki
for French users we have made a video PID tutorial : http://www.youtube.com/playlist?list=PL9299C6EBE6E697A3
- Mon Jun 04, 2012 8:17 am
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
Re: Rushduino OSD - Multiwii based open software osd
copterrichie wrote:Actually, the new protocol is Waaaaayyy better then the old one. Much less traffic and only required information is transmitted.
yes it's true the new protocol is really better but to intergrate it's not so easy
- Sun Jun 03, 2012 6:37 pm
- Forum: Software development
- Topic: Magnetometer HMC5883 Glitching
- Replies: 22
- Views: 7440
Re: Magnetometer HMC5883 Glitching
there is perhaps a bug. Yesterday I had the same problem in fly on a CRIUS SE. It was on the R840 version. with the 2 last dev I didn't have this problem.
I will make more tests
I will make more tests
- Sun Jun 03, 2012 6:29 pm
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
Re: Rushduino OSD - Multiwii based open software osd
the V8 is not compatible with the last dev version. The serial link is not the same and we try to intergrate it but we have difficulties.
- Wed May 30, 2012 10:47 am
- Forum: Software development
- Topic: Barometer fix - PETITION
- Replies: 46
- Views: 31126
Re: Barometer fix - PETITION
I don't sign it for me baro is working very good. Just have a look at the tuning procedure
- Fri May 25, 2012 1:45 pm
- Forum: Software development
- Topic: MultiWii 2.0 gyros & accels backwards on Cirrus Board
- Replies: 3
- Views: 2193
Re: MultiWii 2.0 gyros & accels backwards on Cirrus Board
???? it's strange, I have a CRIUS SE and I had not change the orientations, it's working fine for me
- Thu May 24, 2012 1:54 pm
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 898768
Re: GPS integration
warthox wrote:can somebody please post working gps pids so i have a starting point?
tried gps first time yesterday. it did something but i dont got it tuned well.
thanks in advance.
On the previous page you have a good tutorial for beginners
- Thu May 24, 2012 10:57 am
- Forum: Ideas
- Topic: Progressive Stable to Accrobatic mode.
- Replies: 0
- Views: 902
Progressive Stable to Accrobatic mode.
I just have an idea. For slow motion it's better to fly on stable mode but when you want to make accrobatic moves you need to switch to accro mode. The idea is to have a stable mode where the acc is progresssively inhibed when you use full stick. when you are near the center you have a full Stable m...
- Wed May 23, 2012 3:43 pm
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 898768
Re: GPS integration
EXCELLENT tutorial thanks a lot !
- Wed May 23, 2012 11:17 am
- Forum: Software development
- Topic: Drift problem in auto level mode
- Replies: 35
- Views: 11395
Re: Drift problem in auto level mode
yes you have to try with the last dev version. Before this version I am ok with you there is drift.
- Tue May 22, 2012 9:34 am
- Forum: Software development
- Topic: Drift problem in auto level mode
- Replies: 35
- Views: 11395
Re: Drift problem in auto level mode
for me with the last dev, the stable mode is just perfect. No drift
- Fri May 18, 2012 1:12 pm
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
Re: Rushduino OSD - Multiwii based open software osd
no I think your cables are not enought protect and too long.
- Thu May 17, 2012 1:28 pm
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
Re: Rushduino OSD - Multiwii based open software osd
yes sorry, we have problems with the new serial link but we are working on it.
For the moment all the protocol is integrate, but we have a important ghost bug and we have to find it.
Sorry for the delay
For the moment all the protocol is integrate, but we have a important ghost bug and we have to find it.
Sorry for the delay
- Wed May 16, 2012 9:42 am
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
Re: Rushduino OSD - Multiwii based open software osd
yes you are true !
- Wed May 16, 2012 9:00 am
- Forum: Software development
- Topic: Rushduino OSD - Multiwii based open software osd
- Replies: 782
- Views: 250995
Re: Rushduino OSD - Multiwii based open software osd
With hight power, you have more electronic noise.
When you use an OSD board the video signal cross the board and componants so it can be easyer impact by noise.
If you can, an easy solution is to put a aluminum plate between the OSD and other board. Don't forget to connect this board to the ground
When you use an OSD board the video signal cross the board and componants so it can be easyer impact by noise.
If you can, an easy solution is to put a aluminum plate between the OSD and other board. Don't forget to connect this board to the ground
- Sun May 13, 2012 6:11 pm
- Forum: Frames
- Topic: The Hunter VTAIL by DialFonzo & Bledi
- Replies: 4
- Views: 3727