Search found 187 matches

by Bledi
Sun Jan 06, 2013 7:08 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 90543

Re: Rushduino OSD - Multiwii based open software osd

OK I had some news of Jean Gab. I can't explain you but for the moment he can't continu developpement and other.
I whish him to be better rapidly.

Thanks for all that are working on this OSD !
by Bledi
Tue Aug 07, 2012 4:17 pm
Forum: Software development
Topic: GPS Direction to home
Replies: 0
Views: 258

GPS Direction to home

Actually I work on Rushduino GPS and the direction to home.
Can you confim me that the serial data GPS_Direction_to_home is :
- center on the north (N = 0°, W = -90°, E = 90°) ?
- indicate the absolute direction to home but not the direction relative to heading ?
- heading is N=0°, W = 270°, E = 90°
by Bledi
Fri Aug 03, 2012 2:43 pm
Forum: Software development
Topic: GPS integration
Replies: 1724
Views: 454217

Re: GPS integration

Hello Eosbandi, i have the following gps board from adafruit that uses a MTK3339 chip: m. I would like to ask you if this is compatible whith I2C gps. If it is, can i flash it with MTK3329 firmware? If not is it going to be in your future plans? Thanks in advance! George yes it's work (it's what I ...
by Bledi
Tue Jul 31, 2012 4:25 pm
Forum: Software development
Topic: Ellipsoid into Sphere Calibration of Acc and Magn
Replies: 17
Views: 3384

Re: Ellipsoid into Sphere Calibration of Acc and Magn

my opinion : "Wahooooooooooooooooooooooooo" looks really great !
by Bledi
Tue Jul 31, 2012 3:55 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 90543

Re: Rushduino OSD - Multiwii based open software osd

really strange !!! you never have the arrow ????
I don't have this bug.

Try to reload the mcm file
by Bledi
Tue Jul 31, 2012 9:44 am
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 90543

Re: Rushduino OSD - Multiwii based open software osd

palton wrote:Any settings in MW, like enabling LCD telemetry or any specific LCD config that is required in MW?

no it's a bug, I have to find where is
by Bledi
Mon Jul 30, 2012 8:50 am
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 90543

Re: Rushduino OSD - Multiwii based open software osd

For PID menu I can't test but I purhaps find the problem. in config.h : // STICK POSITION #define MAXSTICK 1900 #define MINSTICK 1000 #define MINTROTTLE 1220 change to // STICK POSITION #define MAXSTICK 1800 #define MINSTICK 1100 #define MINTROTTLE 1220 to activate menu : - PITCH FULL - YAW FULL - T...
by Bledi
Mon Jul 30, 2012 8:30 am
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 90543

Re: Rushduino OSD - Multiwii based open software osd

BUG LIST :
- PID menu, impossible to go in - confirmed
- Home arrow, down position we see niumber 11 - to confirm
- Amperage sensor, to test (skytor code)
- Sencond batt - to implement (skytor code)
by Bledi
Thu Jul 26, 2012 8:45 am
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 90543

Re: Rushduino OSD - Multiwii based open software osd

yes for donation you can send I at my adress :)
Can you test the arrow of direction to home, I am not sure it's ok and I can't test this week
by Bledi
Tue Jul 24, 2012 4:25 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 90543

Re: Rushduino OSD - Multiwii based open software osd

it's something link "add members" but I don't know how to admin a google repository.

Is someone can help us ?
by Bledi
Tue Jul 24, 2012 3:58 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 90543

Re: Rushduino OSD - Multiwii based open software osd

yes but you ahev to open the SVN on google for other developpers. For the moment we just can download but not upload
by Bledi
Tue Jul 24, 2012 2:01 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 90543

Re: Rushduino OSD - Multiwii based open software osd

I think is an excellent idea. Faster and better
by Bledi
Tue Jul 24, 2012 12:35 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 90543

Re: Rushduino OSD - Multiwii based open software osd

I can't release for him but I had send a e-mail.
by Bledi
Wed Jul 18, 2012 10:11 am
Forum: Ideas
Topic: wishlist for v2.2 - CLOSED
Replies: 150
Views: 17608

Re: wishlist for v2.2

don't forget the excellent accro trainer mode (flip and loops on stable mode) : viewtopic.php?f=16&t=1944
and the VTAIL modes : viewtopic.php?f=8&t=2033&start=10#p18663
by Bledi
Wed Jul 18, 2012 8:45 am
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 90543

Re: Rushduino OSD - Multiwii based open software osd

All is OK (on PAL). Johnny is testing the NTSC and he release this version
by Bledi
Sat Jul 14, 2012 1:38 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 90543

Re: Rushduino OSD - Multiwii based open software osd

Release is for few days ...
http://youtu.be/CNouIFwaM3Q

We have to test it on fly and it's ok
by Bledi
Fri Jul 13, 2012 5:20 pm
Forum: Software development
Topic: GPS integration
Replies: 1724
Views: 454217

Re: GPS integration

Great job EOSBandi.
Just 1 think: is it possible de add a #define for the Led pin
#define LedPin 13

Because for exemple on the Rushduino GPS the led pin is on 2

Thanks
by Bledi
Thu Jul 12, 2012 9:21 pm
Forum: Software development
Topic: try to release 2.1: based on r976
Replies: 34
Views: 8090

Re: try to release 2.1: based on r976

Hi, Thanks for this, but some checks must obviously be done to be sure of this mod. So too late for 2.1, but ok for after. If you don't integrate this mod, plz go back to the last mix or just replace it by Y4 with YAW correction because the actual mix on RC2 is not working on most actual VTAIL conf...
by Bledi
Thu Jul 12, 2012 3:48 pm
Forum: Software development
Topic: playing with acc-z altitude hold
Replies: 44
Views: 6805

Re: playing with acc-z altitude hold

Did you try to add filter on your Gyro and ACC ?
I use a CRIUS Lite and SE with defaut PID on baro and the result is just perfect (just add a little I)
Most of problem is because gyro is to mutch sensitive and the FC try to make corrections all the time so it's difficult to have a good altitude level
by Bledi
Thu Jul 12, 2012 3:23 pm
Forum: Software development
Topic: try to release 2.1: based on r976
Replies: 34
Views: 8090

Re: try to release 2.1: based on r976

copterrichie wrote:I use Y4 for my VTail copters, it works great. ;)

yes but you have set YAW @ -1 or did you invert your Rear motors ? The solution 1 is just to correct this little error and to have the same order for motors as a QuadX
The solution 1 is a Y4 with inverted YAW
by Bledi
Thu Jul 12, 2012 3:18 pm
Forum: Software development
Topic: try to release 2.1: based on r976
Replies: 34
Views: 8090

Re: try to release 2.1: based on r976

Big warning for VTAIL : in the old version (2.0) the mix of VTAIL is for the most comun version : 2 differents moteurs or the same moteurs but smaller props rear. in the old version (2.0) they were a bug on the order of rear motors so we had to put YAW @ -1 In the 2.1 RC2 the mix is ONLY for a VTAIL...
by Bledi
Wed Jul 11, 2012 3:34 pm
Forum: Software development
Topic: Let's try to release 2.1: second try based on r964
Replies: 65
Views: 11623

Re: Let's try to release 2.1: second try based on r964

No I had disarming 2 times during some special accro moves ... Now I always use switch to arm how have u managed to disarm while flying? its more or less impossible. you can only disarm when throttle at zero which (throttle at zero) also means that the copter will not react to any stickinput nor it...
by Bledi
Tue Jul 10, 2012 4:51 pm
Forum: Software development
Topic: Let's try to release 2.1: second try based on r964
Replies: 65
Views: 11623

Re: Let's try to release 2.1: second try based on r964

No I had disarming 2 times during some special accro moves ... Now I always use switch to arm
by Bledi
Sat Jul 07, 2012 5:08 pm
Forum: Software development
Topic: GPS integration
Replies: 1724
Views: 454217

Re: GPS integration

the problem is not to be good enough, but it's not natural to make a gyro init to reset home position, isn't it ?
by Bledi
Sat Jul 07, 2012 4:29 pm
Forum: Software development
Topic: GPS integration
Replies: 1724
Views: 454217

Re: GPS integration

I just had an idea for the RESET of home position.
Why not using the same switch as the switch for RTH activation but only when motors are not armed :

Code: Select all

if (rcOptions[BOXGPSHOME]) && !armed)
{
GPS_reset_home_position();
}
by Bledi
Thu Jul 05, 2012 6:51 pm
Forum: Software development
Topic: Yet another Android based naze32/multiwii 2.0 configurator
Replies: 54
Views: 9270

Re: Yet another Android based naze32/multiwii 2.0 configurat

as Patrick
8-) :!:

Oh just I more question ... Is the google map working ? It don't work for me ...
by Bledi
Thu Jul 05, 2012 6:43 pm
Forum: Software development
Topic: Yet another Android based naze32/multiwii 2.0 configurator
Replies: 54
Views: 9270

Re: Yet another Android based naze32/multiwii 2.0 configurat

one more thing,
To have PITCH/ROLL PID on 1 line is really a good idea, but on special models I sometime need to have different PID on pitch and roll.
Is it possible to have a option to select PITCH/ROLL PID on 1 or 2 lines.

Thanks a lot ! Your soft is a must have !
by Bledi
Wed Jul 04, 2012 8:41 am
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 90543

Re: Rushduino OSD - Multiwii based open software osd

Yes we are working on a new release, we had wait for a stable serial protocol before finish it.
Stay tune
by Bledi
Thu Jun 21, 2012 4:27 pm
Forum: Software development
Topic: New Multiwii Serial Protocol
Replies: 409
Views: 115844

Re: New Multiwii Serial Protocol

copterrichie wrote:Timing is critical, you are using a totally different method(MAX7456), we are using a LM1881 to detect the lines and both interrupt handlers are used. Serial.write is useless.

For sure with a video synchro you need to have a high refesh rate of video frame.
by Bledi
Thu Jun 21, 2012 3:02 pm
Forum: Software development
Topic: New MWC OSD from GLB
Replies: 3
Views: 1057

Re: New MWC OSD from GLB

There is some screenshot. They use a MAX7456 like on Rushduino but on screen datas don't look to be the same.
It's not a Rabbit OSD :) but wait and see
by Bledi
Thu Jun 21, 2012 2:07 pm
Forum: Software development
Topic: New Multiwii Serial Protocol
Replies: 409
Views: 115844

Re: New Multiwii Serial Protocol

The time is not really critical on OSD. The refresh rate is very slow to have time to read on screen informations.
NOTA : Alex can you upgrade the protocol description on the first page plz ?
by Bledi
Thu Jun 07, 2012 4:44 pm
Forum: Software development
Topic: GPS on Crius SE board
Replies: 121
Views: 40581

Re: GPS on Crius SE board

it's looks to exist a software solution :

Code: Select all

see the following code snippet from user HULK

void(* resetFunc) (void) = 0; //declare reset function @ address 0
...
resetFunc();  //call reset
...


from here : http://www.arduino.cc/cgi-bin/yabb2/YaB ... 250663814/
by Bledi
Thu Jun 07, 2012 9:32 am
Forum: Software development
Topic: Multiwii Documentation Wiki
Replies: 74
Views: 6321

Re: Multiwii Documentation Wiki

yes I know but I don't speak english as well as french :)
by Bledi
Wed Jun 06, 2012 9:46 am
Forum: Software development
Topic: Multiwii Documentation Wiki
Replies: 74
Views: 6321

Re: Multiwii Documentation Wiki

for French users we have made a video PID tutorial : http://www.youtube.com/playlist?list=PL9299C6EBE6E697A3
by Bledi
Mon Jun 04, 2012 8:17 am
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 90543

Re: Rushduino OSD - Multiwii based open software osd

copterrichie wrote:Actually, the new protocol is Waaaaayyy better then the old one. Much less traffic and only required information is transmitted.

yes it's true the new protocol is really better but to intergrate it's not so easy
by Bledi
Sun Jun 03, 2012 6:37 pm
Forum: Software development
Topic: Magnetometer HMC5883 Glitching
Replies: 22
Views: 2678

Re: Magnetometer HMC5883 Glitching

there is perhaps a bug. Yesterday I had the same problem in fly on a CRIUS SE. It was on the R840 version. with the 2 last dev I didn't have this problem.
I will make more tests
by Bledi
Sun Jun 03, 2012 6:29 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 90543

Re: Rushduino OSD - Multiwii based open software osd

the V8 is not compatible with the last dev version. The serial link is not the same and we try to intergrate it but we have difficulties.
by Bledi
Wed May 30, 2012 10:47 am
Forum: Software development
Topic: Barometer fix - PETITION
Replies: 46
Views: 19450

Re: Barometer fix - PETITION

I don't sign it for me baro is working very good. Just have a look at the tuning procedure
by Bledi
Fri May 25, 2012 1:45 pm
Forum: Software development
Topic: MultiWii 2.0 gyros & accels backwards on Cirrus Board
Replies: 3
Views: 1136

Re: MultiWii 2.0 gyros & accels backwards on Cirrus Board

???? it's strange, I have a CRIUS SE and I had not change the orientations, it's working fine for me
by Bledi
Thu May 24, 2012 1:54 pm
Forum: Software development
Topic: GPS integration
Replies: 1724
Views: 454217

Re: GPS integration

warthox wrote:can somebody please post working gps pids so i have a starting point?
tried gps first time yesterday. it did something but i dont got it tuned well.
thanks in advance.

On the previous page you have a good tutorial for beginners
by Bledi
Thu May 24, 2012 10:57 am
Forum: Ideas
Topic: Progressive Stable to Accrobatic mode.
Replies: 0
Views: 369

Progressive Stable to Accrobatic mode.

I just have an idea. For slow motion it's better to fly on stable mode but when you want to make accrobatic moves you need to switch to accro mode. The idea is to have a stable mode where the acc is progresssively inhibed when you use full stick. when you are near the center you have a full Stable m...
by Bledi
Wed May 23, 2012 3:43 pm
Forum: Software development
Topic: GPS integration
Replies: 1724
Views: 454217

Re: GPS integration

EXCELLENT tutorial thanks a lot !
by Bledi
Wed May 23, 2012 11:17 am
Forum: Software development
Topic: Drift problem in auto level mode
Replies: 35
Views: 4833

Re: Drift problem in auto level mode

yes you have to try with the last dev version. Before this version I am ok with you there is drift.
by Bledi
Tue May 22, 2012 9:34 am
Forum: Software development
Topic: Drift problem in auto level mode
Replies: 35
Views: 4833

Re: Drift problem in auto level mode

for me with the last dev, the stable mode is just perfect. No drift
by Bledi
Fri May 18, 2012 1:12 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 90543

Re: Rushduino OSD - Multiwii based open software osd

no I think your cables are not enought protect and too long.
by Bledi
Thu May 17, 2012 1:28 pm
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 90543

Re: Rushduino OSD - Multiwii based open software osd

yes sorry, we have problems with the new serial link but we are working on it.
For the moment all the protocol is integrate, but we have a important ghost bug and we have to find it.

Sorry for the delay
by Bledi
Wed May 16, 2012 9:00 am
Forum: Software development
Topic: Rushduino OSD - Multiwii based open software osd
Replies: 782
Views: 90543

Re: Rushduino OSD - Multiwii based open software osd

With hight power, you have more electronic noise.
When you use an OSD board the video signal cross the board and componants so it can be easyer impact by noise.
If you can, an easy solution is to put a aluminum plate between the OSD and other board. Don't forget to connect this board to the ground