Search found 702 matches

by kataventos
Sun Jul 13, 2014 10:09 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

@Kaysee OK, I see that you are using NAZE32... I removed the BOXNAMES from the code, that´s probably why... some functions will not be available until a new NAZE code review We are only using BOXIDS on the HUD also. Sorry for the inconvenient -KV latest firmware build I uploaded does "same&quo...
by kataventos
Sun Jul 13, 2014 10:08 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

Oh yes. i think its almost there 1100mah is about 6.30 on my mini quad . So I doubled it to 60 .which is max, and now its a tiny bit too high. It said 1100 and really charged just about 1000 So one more step and it should be spot on. Cant test now its too windy . Will report back ... OK thanks for ...
by kataventos
Fri Jul 11, 2014 1:15 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

@Olddude, good to know that you manage to get it working properly. Don´t forget to give us an update as soon as your able to fly it NOTE: If you have difference at the end of the flight and after recharge your batt I would recommend the easy step where you use the lamp to tune sensitivity which is a...
by kataventos
Fri Jul 11, 2014 1:02 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

Hi Scrat, sure! In that case don´t have a clue... no one on the Team flies baseflight at this time (as far as I know). I can take a look to TC code ASAP (lot´s of work here at this time sorry ) Meantime you can probably help on this since you are flying it... Can you try to install OSD correctly and...
by kataventos
Thu Jul 10, 2014 3:48 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

@Olddude OK, I explained myself less correctly on that point... So, here is how it goes: High and low bytes maybe seem confusing at first but this was the way we found to have the needed resolution. - after setting the sensitivity and finding if your sensor is UNI or BI directional you will need to;...
by kataventos
Thu Jul 10, 2014 12:35 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

Hi Olddude, OK, this is an example that everyone should probably find easy to use in order to check if sensor is OK and fine tuned on GUI: - tune the sensitivity according the sensor´s manual; - then put it most possible close to zero (more like 0.4/0.5 in my case and after this example, remember th...
by kataventos
Tue Jul 08, 2014 3:27 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

but i cannot get Ampere to show correctly What am i doing wrong ... Hi Olddude, please see wiki carefully here: m There will be no doubts after. If not, please ask what is not so explicit. To conclude your settings on GUI please read here: m This will definitely help you, everything is explained th...
by kataventos
Tue Jul 08, 2014 3:21 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

@Kaysee OK, I see that you are using NAZE32... I removed the BOXNAMES from the code, that´s probably why... some functions will not be available until a new NAZE code review We are only using BOXIDS on the HUD also. Sorry for the inconvenient -KV Hi. So there will be no BOXNAMES anymore? HiScrat, W...
by kataventos
Tue Jul 08, 2014 1:01 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

@Kaysee

OK, I see that you are using NAZE32... I removed the BOXNAMES from the code, that´s probably why... some functions will not be available until a new NAZE code review :(
We are only using BOXIDS on the HUD also. Sorry for the inconvenient :roll:

-KV
by kataventos
Tue Jul 08, 2014 12:52 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

Hi folks. Just want to express my thanx to KVTeam for making this great OSD. I've used it on my RD230 Mini H-Quad from fpv-reccon and all the function n informations that I needed works great for me so far. YES SIR... that is some serious flying thanks for sharing. (commented on your video) Was tha...
by kataventos
Tue Jul 08, 2014 12:48 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

I've just tried version 2.3. I can't get any of the changes i make using the GUI to save which is stopping me from using the OSD as I can't configure it. Previous versions worked fine. Hi Teslahed, as INT77 said we need some more info here, my prior release tests were 100% OK anyway we will continu...
by kataventos
Tue Jul 01, 2014 4:05 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

@Scrat and everyone else interested 8-)

Sorry for late reply but have been very busy lately. http://www.skyscan.pt

As for the 2.3dev, you can go and download it already (project main page).

Hope you all have lot´s of fun with it.

Fly safe,
-KV
by kataventos
Tue May 06, 2014 9:33 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

Can someone pls help me out here. I just now hooking up my MINIMOSD from Witespy and followed the wiring diagram from the link that Witespy had listed. Not sure if Witepsy's osd is plug and play without uploading firmware and setting up. When everything is hooked, i can see on the monitor that the ...
by kataventos
Wed Apr 23, 2014 1:50 pm
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 873
Views: 333047

Re: MultiWii OSD - MWOSD

kaventos, We all appreciate the work you and your team have done to this point- but we languished for months waiting for some simple bug fixes- I myself was thrilled to see another branch taken over by shikra to start working these simple fixes. From a users perspective, it seemed KVOSD was dead. N...
by kataventos
Wed Apr 23, 2014 11:44 am
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 873
Views: 333047

Re: MultiWii OSD - MWOSD

shikra wrote:@everyone else - just ignore him. If it carries on I'll get his bad posts deleted.


:mrgreen: Bad posts?
by kataventos
Tue Apr 22, 2014 5:26 pm
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 873
Views: 333047

Re: MultiWii OSD - MWOSD

Like the PWM RSSI... -Ohhh Shikra thanks for this it works nicely and smooth... you are the man What they didn´t knew is that it was permanently fixed by us and used by you even before we packaged it for 2.3 dev due to our available time to properly test it in the air. The same with current sensing....
by kataventos
Tue Apr 22, 2014 4:50 pm
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 873
Views: 333047

Re: MultiWii OSD - MWOSD

@kv - i didn't know 2.3 was out yet?? I will take a look. I missed that. Please take it the right way if any new features make it - personally I would take it as a compliment if any of my contributions to open source were reused. I'll say now - I have been looking at HUD vids lately and one is simi...
by kataventos
Tue Apr 22, 2014 3:11 pm
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 873
Views: 333047

Re: MultiWii OSD - MWOSD

hinkel wrote:( I use it for Harakiri ) !


Humm... OK noted for the closed source HUD ;)

Mean time no more problems with it, GUI was coded to handle BOXIDS only.
by kataventos
Tue Apr 22, 2014 2:11 pm
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 873
Views: 333047

Re: MultiWii OSD - MWOSD

ROADMAP. Guys, am considering features for next release. her eis what is on the agenda - please advise anything extra would like to see. Changelog since R1 i.e. DONE (may not be available on repository / packaged yet + Filter changed to 8 point ring + optional 2nd stage expo filter + All sensors no...
by kataventos
Tue Apr 22, 2014 1:59 pm
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 873
Views: 333047

Re: MultiWii OSD - MWOSD

For OSD switch, you read my mind - for next release is my plan to turn it into a multi toggle switch - can change between say map mode/normal HUD/minimal screen/clear screen. It will cycle between ones you enable. So could be all or stay on same screen. Will that work? Yep it works because we have ...
by kataventos
Mon Apr 14, 2014 2:38 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

Hi Everone! I came across a problem with the rushosd, that I cannot solve, or I rather say with the minimosd, as this likely be hardware related. This minimosd board has freashly arrived, it supposed to be 1.1, it has the 5V mod done, so both the power and the ground pins are soldered to have the a...
by kataventos
Thu Apr 10, 2014 6:59 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

subaru4wd wrote:So when can we expect v2.3 to be released?


Will you update the wiki so we know how to flash .hex files?

Will we finally get PWM RSSI support?


Answers for future questions: www.kvteamosd.com

Thanks ;)
by kataventos
Thu Apr 10, 2014 4:51 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

Again the stuff with the RasPi development and supposed ideas that you gave? Now you can develop it... go for it ... ohhh no ! you´r prety much busy playing with the camera and waiting for the frames to arrive the FPV time lapse What was it after all? You have sent me a PM yesterday and deleted it ...
by kataventos
Thu Apr 10, 2014 4:48 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

Kataventos, it is a bit sad reading this, some of us had donated as a symbolic way to recognize the work around a open source project. I'm sure you have good reasons for doing it, but please try to roll back your decision, publishing the code is the best way for maintaining the spirit of open sourc...
by kataventos
Thu Apr 10, 2014 4:26 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

Well, that is a MAJOR changed and it appears to me, that you can not take what you have dished out in the past. I will not go into details. ha!! Again the stuff with the RasPi development and supposed ideas that you gave? Now you can develop it... go for it ... ohhh no ! you´r prety much busy playi...
by kataventos
Wed Apr 09, 2014 3:39 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

Everithing will just be like before! Zarro boogs found? Just no source... This prevents stuff like what I see in Shikra´s "developments" mainly on the GUI introduction! You do not like others, who try to improve software? Or think that other software will kill your "no bugs" con...
by kataventos
Wed Apr 09, 2014 3:36 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

Hi all, NOTE: the new MULTIWII HUD (KV TEAM code) will be served in HEX and the new project page will be announced ASAP . Till then... have lot´s of fun and don´t forget to fly safe. m Cheers, -KV You forgot to update hardware while closing the source. Nobody gives a fuck about obsolete overpriced ...
by kataventos
Wed Apr 09, 2014 3:23 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

No no guys! I wonder why. Is it to prevent feeding commercial products with code or is it going to be "pay per view" in the future? Anyway thanks must go to kataventos for carrying his project so far on an open basis! Well, it seems to be the general trend now, everyone is out for themselv...
by kataventos
Wed Apr 09, 2014 3:03 pm
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 873
Views: 333047

Re: MultiWii OSD - MWOSD

On Max sketch there are some defines you can use to lower the white level: Defines you can use: #define WHITE_level_80 0x03 #define WHITE_level_90 0x02 #define WHITE_level_100 0x01 #define WHITE_level_120 0x00 Where to change: // set all rows to same charactor white level, 90% digitalWrite(MAX7456SE...
by kataventos
Tue Apr 08, 2014 6:04 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: KV Team Multiwii OSD

Hi all, 2.3 will be released during May 2014. KV Team OSD will stop developing this code but a new one, faster lighter and objective FPV code have born. Flight tests are being made by me and Neb (SHORT TEAM that developed the old RUSH code since r340 till the last one 2.3 (soon...)) We thank you all...
by kataventos
Mon Mar 31, 2014 4:21 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

Hi, be patient please I have been (still am) with lot´s of work these days, professional and other projects. Of course that developments will continue mainly with the new HUD, but we will release the announced last version of the old OSD. "I will be back" soon... Have fun and fly safe. Che...
by kataventos
Sun Feb 09, 2014 5:54 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

Hi Int77, yep, have been studding This must not be mistaken with the OSD 2.3 dev that will be released soon. This is a new project that will be using same hardware and principles but not as comfortable as the OSD. It is made from scratch for speed and resolution and will not be able to tune PID´s, c...
by kataventos
Thu Feb 06, 2014 8:21 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

Hi Int77, of course my friend that is exactly why I post examples before the release of a development version and I truly appreciate your comments. Well, I see al your point´s and I´m also well aware of what is a HUD but my point of view is: - Would it be appropriated to hobby flights/pilots? - Woul...
by kataventos
Wed Feb 05, 2014 12:45 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

Hi Int77 / everyone else, I agree in some point about home arrow and heading... but, because home arrow is two chars now it won´t fit as nicely as before at the screen center! Because of this and wanting to really change the screen together with new implementations on this dev like Volume flight etc...
by kataventos
Tue Feb 04, 2014 3:24 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

@Howardhb

Hey,
cheers friend, sorry I only saw your post´s now! That is in fact a nice work around for the dev 2.2 and I honestly did not remember that at the time :mrgreen:
But as Carlo said before, you don´t need it on 2.3 dev ;)
by kataventos
Tue Feb 04, 2014 3:11 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

Hey, on last post I forgot the small video... 85784806 As i told you before.. That freakin gps alt hold video got me hooked on multirotors so you better hurry brother Ahahah I remember you my friend! We talked by email... I wish you great flights and hope you managed to get your setup tuned. Cheers
by kataventos
Tue Feb 04, 2014 12:49 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

When will 2.3 be out? Hi, 2.3 will be out soon and fully loaded. We are just dealing with the new cycle time speed, everything else like reported issues with correct reading on current sensing and others are now solved as well as the long time issue called PWM RSSI ... The GUI will from now on have...
by kataventos
Mon Jan 27, 2014 6:05 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

Hi, Sorry but sometimes I do not have the time to answer all questions. Someone asked above about the side bars and someone answered to it Side bars will continue to exist of course, and from now on with a real purpose. Also made other developments in this area regarding real data to assist the flig...
by kataventos
Sun Jan 26, 2014 10:25 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

bicycle wrote:...(always crashes a moment after serial is opened)

Thanks!



Hi,

;) Yes it is know, last changes are not in the repo yet. I will synchronize when they are all ready to go. Carlo is also taking care of the new cycle time speed.

Be patient, I will announce it soon :D
by kataventos
Tue Jan 21, 2014 12:25 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

As for the time cycle is 50ms for Hi and 100ms for Low. It is 20hz actually. ... And probably MSP request scheduler might be moved to a faster loop. It could be particularly interesting for aggressive low altitude flights where AH/altitude update rates are important Hey, sorry for my misunderstandi...
by kataventos
Mon Jan 20, 2014 12:50 am
Forum: Pictures & Videos
Topic: KV FPV
Replies: 62
Views: 25172

Re: KV FPV

Ahh OK. the draws are there, you need to make a clone on your PC or to download a zip file They were not packaged and released but they are present on the repo, I have been working on the OSD so, no update on this project for some time. Also will be presenting the SQUID soon... ("lot´s" of...
by kataventos
Mon Jan 20, 2014 12:39 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

We are already close to the limits on memory... Regarding the pitch ladder OK it will be exactly like the AH to avoid confusion and will be possible to deactivate it on config.h until we are able to free up some Mem. As for the time cycle is 50ms for Hi and 100ms for Low. It is 20hz actually. This w...
by kataventos
Sat Jan 18, 2014 7:20 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

Of course, these pics were just to make my point about the implementation... I like "dots" better for a long time now for the exact same reason Ohhh and no side bars also... https://lh4.googleusercontent.com/-c8P4JoPG2SA/UtrENsQvpDI/AAAAAAAABcs/4QE9kd7xjIg/s689/Picture%25204.png Anyway, al...
by kataventos
Sat Jan 18, 2014 10:22 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

I am playing with the implementation of a pitch ladder which I think that looks fine but with not much use on our case (hardware limitations) In this case I would like to ask if this have "legs to go": - "Pitch ladder" will follow AH for (Pitch) all the way with (degrees=x) - &qu...
by kataventos
Sat Jan 18, 2014 9:57 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

Great! Can't wait. Could you be so kind and check this post of mine: http://www.multiwii.com/forum/viewtopic.php?f=8&t=2918&start=810#p45578 thanks! Hey Scrat, I see... already posted a lot of times about the RC Filter on this topic and the last time was in December http://www.multiwii.com/...
by kataventos
Fri Jan 17, 2014 5:01 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

This is just a small teaser on the next version 2.3 coming soon... The default screen suffered major changes and it is more simple to read for everyone. The aspect is more "PRO" and new gadgets were programmed... Volume flight can now be set via GUI, autopilot warning, sensors are now deta...
by kataventos
Fri Jan 17, 2014 4:53 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

Ok. I've set WHITE_level to 80 MAX sketch and it's perfect. Great Hi Kata.. I have made the mode you have showed there but i cant get a voltage reading.. Is there a setting i am missing here in multiwii or rush osd setup? I also activated vbat. As far as i understand vbat does not actually looks at...
by kataventos
Thu Jan 16, 2014 2:05 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

Hey Scrat,

yes, that´s it. You can go as low as 80. I never had that kind of issue... what hardware do you have?

See the Max sketch for previous defines:

Code: Select all

#define WHITE_level_80 0x03
#define WHITE_level_90 0x02
#define WHITE_level_100 0x01
#define WHITE_level_120 0x00


Cheers,
-KV
by kataventos
Thu Jan 16, 2014 2:03 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

Hey Int77, OK, I still did not had the chance to roll back again for a second go after seeing this post. Anyway, issue solved. I have been working on a new screen layout more simple to use and less confusing. Chars are bigger specially symbols. Because the pilot knows he´s unit and configured it on ...
by kataventos
Tue Jan 14, 2014 1:54 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389870

Re: SW Development on Minim Osd

Hi Int77, correct and not... I found it this bug this weekend and had hard time to catch it... you can go back to rev417 and still see it (prior to new MAX sketch implementation). Please update your clone to rev 417 and confirm/report back, if you catch the exact cause it would be much appreciated, ...