Search found 51 matches

by Hoppsan_84
Wed Sep 16, 2015 6:33 am
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

No pulses can be tricky or do some one know how to do it on a OrangeRx R620X. Is it enough to get the below say 800?
Is it the function for PPM as for PWM? I did test pulling the cable for the receiver but no failsafe.
Deadpilot is working but I don't like it.
by Hoppsan_84
Tue Sep 15, 2015 4:00 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

After some time whit regular flying (plains whit no FC) I decided I would get the old 450 a go again. New FC and new GPS and I god some fair PH and RTL.
This time I will not do the same mistake and fly whit out failsafe but I can not get it to work.

What will trigger the failsafe?
by Hoppsan_84
Thu Aug 13, 2015 5:55 am
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

Coll. Right now I mostly flyes 250 FPV but I'm checking here for updates every day.
by Hoppsan_84
Mon Jun 22, 2015 3:46 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

@ franko_ Cool
by Hoppsan_84
Fri Apr 10, 2015 5:46 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

@ Hoppsan_84 It is a Frsky th9x radio. I am using up to 12ch ppm. I have my radio set to 12ch in the menu. I have bought 1JR module to dedicate for TX, and 6 Futaba modules from HK as my RX. I have not had any issues so far. Its a very reliable link for me. Keep me posted with your results please. ...
by Hoppsan_84
Thu Mar 26, 2015 7:04 pm
Forum: Connecting elements
Topic: [SOLVED] How to bind spektrum sat to nano (328P)
Replies: 4
Views: 3701

Re: cant figure it out! How to bind spektrum sat to nano (32

I Think you have to connect it to the serial port and when you do you can't connect to it any more.
I am not 100% shure of this but petty shure.
I think this is only suitable if you have a i2c display to program your fc whit.

Don't connect it to 5 volt you Will brick it that I am Shure of.
by Hoppsan_84
Tue Mar 24, 2015 5:07 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

Hoppsan. You can get that if it's too long time between valid msp-packages. Open protocoll.cpp search for MSP_SET_RAW_RC rcSerialCount = 50; // 1s transition Increase to 150. It did not do the trick. To day the program stops after 4 sec when i connect ppm. No difference if I have the rctx on of off...
by Hoppsan_84
Tue Mar 24, 2015 7:58 am
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

OK, I have been distracted for some time, got into building 3D printers... I have found a really nice way to use mavlink....and its VERY reliable via OpenLRS @ 19200 baud. I have never seen data so reliable via OpenLRS before! The only thing I have not tried, is to flash....LOL. First I bought some...
by Hoppsan_84
Thu Mar 12, 2015 6:38 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

@Crash: In fact I meant autostart. Some times it just sat there whit the motors running a little faster than idle. I will try some more to se what casing this behavior. Probably chit behind the transmitter.
by Hoppsan_84
Wed Mar 11, 2015 6:35 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

Tried the new hex today (r147). Worked really god or should I say just as before. Did also try the autostart and autoland function whit great success. The height drop when enabling baro is gone and now when I know how baro works it's just lovely to use. The only thing that didn't work every time was...
by Hoppsan_84
Tue Mar 10, 2015 4:00 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

@Crasch: Cool. I did not know this feature. Shure I have used RTH and auto landing whit success but this feature I did not know of.
So I guess I set the deadband round mid whit rc_db?
Will try my new knowledge when it gets less windy.
by Hoppsan_84
Mon Mar 09, 2015 10:05 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

Quick question about baro mode. When I turn baro on the copter drops some height and settles on that lower height. I would say it's in the region of a 1 meter drop. Is this something to expect or is there a way to make the drop smaller whit change of settings or pid? How is the RX spouse to behave i...
by Hoppsan_84
Mon Mar 02, 2015 7:45 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

@Mr-Fiero Cool.

Just to be clear. You have to talk ppm to the TX? Got ppm going out from my trainer port so I guess I will connect the Orange module thru that.
What's the range for the 100mw version? 4km sounds like overkill.
by Hoppsan_84
Tue Feb 24, 2015 12:37 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

Ok. God to know. Then i can stop trying to get it to work.
Oh so there is some coding going on. Exiting news. Anyting you what help testing?
by Hoppsan_84
Mon Feb 23, 2015 11:33 am
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

Does missions work?
I have loaded waypoints whit MissionPlanner but noting happens when I select GPSAUTO.
by Hoppsan_84
Mon Feb 16, 2015 9:44 pm
Forum: ESCs, propellers , servos and radios
Topic: LemonRX
Replies: 5
Views: 2603

Re: LemonRX

was wondering more about the quality of the receiver.
Got 2 Stormrc receivers and the quality of those are not god but they are cheap. I don't think the Lemonrx receiver is so cheap that I want to test if someone already have.
by Hoppsan_84
Sun Feb 15, 2015 9:41 pm
Forum: ESCs, propellers , servos and radios
Topic: LemonRX
Replies: 5
Views: 2603

LemonRX

Hello

Anyone tried this RX?
http://www.lemon-rx.com/shop/index.php?route=product/product&path=72&product_id=118

Just interested for the soul purpose of 8 channels CPPM and DSMX
by Hoppsan_84
Sun Feb 15, 2015 9:35 pm
Forum: Getting Started - MultiWii config and setup
Topic: Serial connection dependent on power (help)
Replies: 1
Views: 892

Re: Serial connection dependent on power (help)

Maybe something else start communicate whit that port when you power whit battery like Bluetooth or a sbus reciver?
by Hoppsan_84
Thu Feb 12, 2015 5:39 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

What's the status on spectrum satellite rx?
IS PPM the way to get more than 6 channels and gps?
by Hoppsan_84
Sun Jan 11, 2015 6:52 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

Well. I just cut It off well aware of the posible of an broken FC
by Hoppsan_84
Fri Jan 09, 2015 7:03 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

I can also confirm that PH on Harakiri works.
Both on my 450 and my 250 whit standard settings.

External mag and gps on a pedestal is my recommendation

https://www.youtube.com/watch?v=ZChvZokTJ7c
https://www.youtube.com/watch?v=wzNhYDo5a_U
by Hoppsan_84
Wed Jan 07, 2015 9:07 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

@Mr-Firo ok now I know what you mean. Thanks for your help. I will put the code asap on my harakiri. Still I have to finde a solution to protect the baro on the board, otherwise it may still jump around. Does the exposition have somthing to do with the jumping? @Hoppsan_84 Would the other gps help ...
by Hoppsan_84
Wed Jan 07, 2015 8:47 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

@ sn0west If I could jump in here, I think you lost your lock for sure on the GPS. I think when you mention being in angle mode, maybe you want to set to also have ANGLE enabled while the PH, and also for your flight mode when not using GPS. I noticed in your config that it was not enabled in PH, s...
by Hoppsan_84
Mon Jan 05, 2015 9:37 am
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

My 450 didn't do well whit RTH (RTL) and wind when I whas on defult settings It just flued whit the wind. What i did whas setting nav_tiltcomp=40 insted of 30. I got a superfast RTH so it whas a bit scarry. My cure for the speed whas simply lowering the nav_speed_max to a more pleasing speed. Now I ...
by Hoppsan_84
Sun Jan 04, 2015 1:16 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

It could be so many more things than the software.
Like hove many satellites did you connect to?
Mag interference
Out of range
by Hoppsan_84
Thu Jan 01, 2015 6:33 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

there is a command to restore to default settings. Its described in the start screen after you done the ###.
by Hoppsan_84
Thu Jan 01, 2015 11:54 am
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

what's the problem? I got PH really tight on my 450 and my 350 right out of the box.
Do you get gps lock? Count the red led blinks. you need a minimum of 6 sats = 2 blinks
by Hoppsan_84
Wed Nov 26, 2014 10:07 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

Problem solved. I was under the impression that aling_mag_x=-2 would reverse the x axel 180degre. Now I'm under the impression that the numbers stands for pitch/roll/yaw and a - I front of the number reverses it. 1=pitch 2=roll 3=yaw For me the final settings are align_mag_x -2 align_mag_y -1 align_...
by Hoppsan_84
Wed Nov 26, 2014 5:42 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

Have now tried what you suggested and the command do something but not always. Still investigating.
by Hoppsan_84
Wed Nov 26, 2014 7:49 am
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

Hi, I had some issues with my internal compass (drifted during throttle up). My small copter had no more possibilites in ordering the components in another way, so I unsoldered the internal HMC5883L from the FLIP32+ and hooked up the external compass of my GPS/Mag Combo Board (CJMCU-108 / UBLOX NEO...
by Hoppsan_84
Sun Nov 16, 2014 7:26 pm
Forum: Ideas
Topic: Airplane mode RTH
Replies: 824
Views: 324612

Re: Airplane mode RTH

I have a 6M and have not done some special config of the gps other than baud and 5hz updaterate.
by Hoppsan_84
Sun Nov 16, 2014 8:37 am
Forum: Ideas
Topic: Airplane mode RTH
Replies: 824
Views: 324612

Re: Airplane mode RTH

Have you selected i2c gps in config.h?
(config.h which is in the fc)
by Hoppsan_84
Sun Nov 16, 2014 8:33 am
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

Sounds like a recipe I'll try.
Tried Harakiri on my 250 with the standard PID and was surprised how good PH and RTH worked.

It flew away, unfortunately due to bad drivers so now I am waiting for parts to an X450.
Will return when I tried your settings.
by Hoppsan_84
Thu Oct 23, 2014 12:27 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1380333

Re: Naze32 hardware discussion thread

Case closed for me on the yaw issue. It was a bad motor.
by Hoppsan_84
Wed Oct 22, 2014 6:26 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1380333

Re: Naze32 hardware discussion thread

I have the same problem (or similar?) I am using the October version also, and my quad keeps turning clockwise on the yaw axis when I move around, and I constantly have to correct it! snippage I have one out of three boards doing this. And mainly under power. Recently, it has been impossible to per...
by Hoppsan_84
Sun Oct 19, 2014 9:32 pm
Forum: Getting Started - MultiWii config and setup
Topic: Multiwii + RasPi + PS3 controller = FUN!
Replies: 6
Views: 2838

Re: Multiwii + RasPi + PS3 controller = FUN!

So for now you fly whit the cable hanging between the copter and the joypad?
by Hoppsan_84
Sun Oct 19, 2014 9:20 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1380333

Re: Naze32 hardware discussion thread

I don't know that yet.. I am going to try the FC in a different frame until then I can't be sure.
For now the yaw issue is still there but I can't trust the esc so. I will give you a report when I know.
by Hoppsan_84
Sun Oct 19, 2014 10:41 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1380333

Re: Naze32 hardware discussion thread

I have the same problem (or similar?) I am using the October version also, and my quad keeps turning clockwise on the yaw axis when I move around, and I constantly have to correct it! snippage I have one out of three boards doing this. And mainly under power. Recently, it has been impossible to per...
by Hoppsan_84
Sat Oct 18, 2014 5:35 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1380333

Re: Naze32 hardware discussion thread

I have the same problem (or similar?) I am using the October version also, and my quad keeps turning clockwise on the yaw axis when I move around, and I constantly have to correct it! snippage I have one out of three boards doing this. And mainly under power. Recently, it has been impossible to per...
by Hoppsan_84
Tue Oct 14, 2014 1:05 pm
Forum: Software development
Topic: Airplane mode
Replies: 512
Views: 209641

Re: Airplane mode

In the beginning I always had passthru at take off but not at landing, Now days i pretty mutch always has horison on.
Its like flying a train as Patrik put it.
by Hoppsan_84
Wed Oct 08, 2014 11:18 am
Forum: Software development
Topic: Airplane mode
Replies: 512
Views: 209641

Re: Airplane mode

You can use the default pids, I do this on my easystar. Only pid I have changed is yaw I=0
When you activate RTH the plane can hesitate before it decides what direction to turn to.
When I had my GPS at 1Hz the plane navigated in a S shape but whit 5Hz it flyes/navigat really good.
by Hoppsan_84
Thu Oct 02, 2014 10:35 am
Forum: Software development
Topic: Airplane mode
Replies: 512
Views: 209641

Re: Airplane mode

PatrikE wrote:
Hoppsan_84 wrote:Short answer, Yes.
I use PatrikE firmware in my Easy Star with a Arduino Mini, and a neo6 gps.

Works perfectly with RTH, PH and Failsafe


Nice that you managed to get it working Hoppsan..



Works incredibly well. A bit boring almost. But it can be turned off if it gets too easy :D
by Hoppsan_84
Thu Oct 02, 2014 9:53 am
Forum: Software development
Topic: Airplane mode
Replies: 512
Views: 209641

Re: Airplane mode

Short answer, Yes.
I use PatrikE firmware in my Easy Star with a Arduino Mini, and a neo6 gps.

Works perfectly with RTH, PH and Failsafe
by Hoppsan_84
Mon Sep 29, 2014 6:12 pm
Forum: Boards
Topic: Naze32 Motors Oddity
Replies: 8
Views: 3318

Re: Naze32 Motors Oddity

and what did you come up whit? You know so gogle can answer it next time :-)
by Hoppsan_84
Sat Sep 27, 2014 5:50 pm
Forum: Shields, boards and sensors
Topic: Disable onboard Mag to use ext Mag
Replies: 32
Views: 10271

Re: Disable onboard Mag to use ext Mag

brewski wrote:A Loiter type mode would be great for beginners. Just centre sticks & quad stays in place.

Isn't That what PH is suposed to do.
by Hoppsan_84
Wed Sep 24, 2014 7:05 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1380333

Re: Naze32 hardware discussion thread

Powerlines to Close to the mag?
by Hoppsan_84
Tue Sep 23, 2014 8:25 am
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 556761

Re: Harakiri aka multiwii port to stm32

F330Naze32.jpg Here's my Proof of Concept Test Vehicle, all taped up, suitable to change form quickly, but good enough to fly. Ground plane is something I've done before for GPS and Transmitter modules, with good success... but I didn't realize it's quite important with Naze32 and Hara Kiri. I disc...
by Hoppsan_84
Thu Sep 18, 2014 9:40 am
Forum: Shields, boards and sensors
Topic: DIY Bluetooth mod for range increase
Replies: 11
Views: 10731

Re: DIY Bluetooth mod for range increase

How much influence does the length of the antenna?
If for example, I have 31 mm?

I have done the mod but have far from 200 meters range, maybe 50 max.
by Hoppsan_84
Thu Sep 18, 2014 8:09 am
Forum: Connecting elements
Topic: Ublox gps and naze32
Replies: 2
Views: 1792

Re: Ublox gps and naze32

Have you tried to swap rx - tx?
Do you have the gps set to 38400 baud?

I have the same setup but whit nmea.