MultiWii

PatrikE wrote:Upper right corner, nect to "Connect"
Press the three dot's to open a dropdown menu

Thanks Patrike,
That did it. How is anyone supposed to know that is the new connect method. I wish there were
an ongoing manual or description of the features, they are not always obvious.
John

Hi Ezio,
I just downloaded Version 3.6.216 and I can't figure out how to use the app. The former
config page is no longer available so I can't select which one of my 4 Blue tooth Quads to talk to.

John

Thanks Patrik,
I didn't know that the GPS had a way of determining altitude.
John

Hi Patrik, Well, problem solved for now. The problem was I setup the Tx for 5 outputs(2 ailerons) which in the FC moved the Aux inputs down one. My Arm was on Aux 4, which was now not defined. I didn't understand your original comment of set up regular program, so I set up as usual for 2 Ail. servos...

Hi Patrik, Some progress after switching to AETR. Tx is setup as AETR AUX1234 Servos connected to Output pins on FC as follows Ail 3 & 4 Ele 6 Thr 1 or 2 Rud 5 All servos move when Tx sticks are moved except Throttle. The GUI receiver display now shows all channels moving correctly including Thr...

Thanks Patrik, I set it up as T(1&2) A(3&4) R(5) E(6) which is what the GUI defines. That didn't work, so I tried AETR which is the default on the receiver tab, and that didn't work. It is strange that on the Receiver screen AETR is listed as default, but the colored bar graph shows AERT. Co...

I am just trying Airplane mode. I fly Quads using Taranis Tx and Cleanflight so am familiar with Baseflight and GUI. The GUI shows the plane surfaces to be 3 4 5 6. The plane I would use needs dual Aileron. I program the Tx so that those channels go to the proper place. When I open the GUI and check...

Thanks Ezio and FengShuiDrone, Update: When I looked in the App settings, it showed BT paired. When I look in the Bluetooth phone settings it showed BT paired and the name of my Quad330 which I entered at the time of setting the baud rate. Since I don't understand what Mac Address is, I called my ph...

I just installed a full version of EZ-GUI and am trying to get it connected. When I bring up the App., the Settings tab is grayed out so I can't set up the correct settings. Need a hint. John May I see a screen capture? My error Ezio. I just got the phone and am trying to get used to it. I am able ...

I just installed a full version of EZ-GUI and am trying to get it connected. When I bring up the App., the Settings tab is grayed out so I can't set up the correct settings. Need a hint.
John

I purchased a RedBearLab BLE Mini from Makershed and I have tried to install the BLE_Mini_multiwii.bin per the instructions. When I hold down the button and plug in the USB I see the virtual drive. As soon as I highlight the *.bin file, the window disappears and the pc says usb not recognized, no wa...

Thanks Jayson
I did as you did, downloaded another copy of 2.4.
Installed a new copy of Arduino 1.6.1, this time leaving out some of the options ie: associate ino files.
This time it compiled just fine. Again, can't explain it, but thanks for urging me to try again.

Well, I don't understand it, but the solution was to compile with the old Arduino 1.3 Ver. Versions 1.5, 1.5.6,1.61
all gave various errors and wouldn't verify or of course upload. The Multiwii win gui doesn't work, but 2.4 Config does.
John

Here is the file. No other files were changed. I think the problem lies with the Arduino which may
have some files that somehow conflict. I tried to go back and compile with 1.5 Version, but it was
over written when I installed the 1.6 Ver. Other files were added for a teensy duino also.
John

In trying to compile the latest Ver.2.4 with Arduino, I get an error: BUZZERPIN_OFF was not declared in this scope. This shows up in alamrms.cpp void turnOff(uint8_t resource){ if (resource == 1) { if (resourceIsOn[1]) { BUZZERPIN_OFF; resourceIsOn[1] = 0; } This error occurs whether BUZZER is defin...