MultiWii

Sure I ended up cutting it here easier to get to and reversible....sda trace....Now I wonder what benefit there would be if I attached the external compass sda to the other side of the cut where it feeds into the accelerometer..... https://scontent-b-lax.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/10415661_7...

So why doesnt baseflight have in its code a way of re zeroing the output on the baro , altitude sent to the OSD? Should happen every time you disarm re-arm....... right ? Have a naze 32 and a flip 32 and they both have this issue ..... so its not them, its in baseflight OR is there a setting in the ...

Have a Dragonfly32 aka a Flip 32, how do you disable the on board compass in order to use a external compass ? From what I gather you cant just plug in the external to the I2C because they use the same port . So what trace needs to be sniped ?

This is controller.. All OSD does is display what controller sends. Pretty sure mine is close to zero at take off. I would expect controller to set it to zero reference upon arm, but no idea what it actually does. Mainly use multiwii Altitude in OSD does not reset to zero on a dragonfly/Flip 32 ? I...

Debogus wrote:Altitude in OSD does not reset to zero on a dragonfly/Flip 32 ?
Is this a OSD thing or a flight controler thing ?
Reads accurate just always starts off 30 40 foot up and doesnt change when its disarmed or armed

Bump..... So nobody else has this issue ?

Altitude in OSD does not reset to zero on a dragonfly/Flip 32 ?
Is this a OSD thing or a flight controler thing ?
Reads accurate just always starts off 30 40 foot up and doesnt change when its disarmed or armed

Dam Im retarded ,reset the center, reset the endpoints ,doh ,found out I set the pitch 60 on both of the D/Rs ....Grrrr all I had to do was fix that .
done works anyway.

Shikra the screen edit in plus is awesome..dont really need a drag and drop..cant wait for 1.3 ...Youda man

My latest is a kv witespy mimimosd w/ 1.2 mwosd ,,,everything's working great....But I cant access the stick programing...What obvious thing did I miss.... Check and make sure you dont have low rates programmed on your transmitter. MWOSD needs to see full stick movement. Have d/r and know from my r...

My latest is a kv witespy mimimosd w/ 1.2 mwosd ,,,everything's working great....But I cant access the stick programing...What obvious thing did I miss....

So how many are using the 1.2 + gui ? Interested in the screen editor . Can I just modify the 0 screen or do I have to enable switch for multiple screens ?

timecop ? The newest firmware is working awesome and the position hold and RTH are working pretty well too. Fun to head off to the far side of the field and see what it will do , like in a lost video scenario......Little 250 quads are so hard to find in grass Next is messing with the nav settings in...

shikra Is there another 1.2 pre release ? I put that one from last week in that wasnt zipped.....Seems to be working OK..... with Baseflight and a minim osd board. and using the gui from that file.. Wish your gui allowed the easier movement of data on the screen like UOSD or Minim extra to get impor...

Thanks Rob....Starting to get the different than BF stuff about motor stop board rotation. etc..... On baseflight have to make sure to tell it turn telem off ...even if it already sez it is....Then its also the MWOSD and making sure to click the armed box in OSD GuI thats a problem with BF as well.....

disarmed
middle throtle , full right ,full down
IF you have dual rates on transmitter, switch to full rates

Never mind I remembered .......rc_motor =2
OK does anyone know what setting might be pertinent to the MWOSD so it will read modes on the OSD ?
Ive put the latest MWosd ver 1.2 that actually has a box for harikari in the config.h
Tommrow will check on goggle....crossing fingers

What is the term in harikari for motor stop...... as in when armed the motors dont spin up at low throtle
MWOSD has a new beta that has a harkari setting.......Trying to set this up .....one more time........Last time I gave up was MWOSD wouldnt show modes or arm disarmed from harikari

It will give me beeps at the transmitter for warning was just trying to dodge the bullet of doing that micro soldering on the mavlinkosd to get the info into the goggles.....

It is outputted on channel 2 reciever pin after 3-4 are bridged .
With baseflight you would plug this into pin8(aux4)

dublepst

Read and read and keyword searched but......Is there a way to input RSSI into a aux channel like in baseflight....from Frsky dr4 .....

So I gather "align_board_yaw" still isnt available on Testcode3 ?
Id move the board but it put the usb in a stupid place ( guess I could wire up a remote plug......)

Thinking my Baro issue was the result of poor foam shielding ....changed it ,now it although it varies many feet, it starts off at zero....what a sensitive bugger

My Altitude doesnt reset...... have a baro on a HK 328p .....Everything else seems to work .....Did I miss something ?...... Right now I just want it for that ,,,not alt hold yet....Oh and when I save n the OSD menu it only keeps the info as long as the battery is plugged in .. moved curser to save ...

Does anynone know the voltage out of the divider ...ballpark that goes to the 328p.....
Im getting .78 can it work with that ? For the ADC voltage sensor on the OSD board