Search found 8 matches

by rukie
Tue Aug 05, 2014 3:13 am
Forum: Boards
Topic: altitude problem during yaw
Replies: 4
Views: 2091

Re: altitude problem during yaw

I am absolutely sure there is no mix. This is one of the first thing I made sure of. Ill try to take a video of the quad to show the behavior of the altitude change, but from observation its does not suggest a mix. The jump is not proportional, its intermittent its like its a revving engine. It almo...
by rukie
Mon Aug 04, 2014 11:37 pm
Forum: Boards
Topic: altitude problem during yaw
Replies: 4
Views: 2091

Re: altitude problem during yaw

Blueseries esc with simonk firmware.
by rukie
Mon Aug 04, 2014 3:30 pm
Forum: Boards
Topic: altitude problem during yaw
Replies: 4
Views: 2091

altitude problem during yaw

Hi guys just a question It seems that I am having issue with my naze32 whenever I do yaw movements particularly clockwise. It changes altitude and throttles up, as if there was a mix. This is in manual mode by the way. I have calibrated the esc's again and again and even checked in the app if it is ...
by rukie
Mon Jul 28, 2014 1:00 pm
Forum: Ideas
Topic: What you don't like in EZ-GUI?
Replies: 51
Views: 16641

Re: What you don't like in EZ-GUI?

I have enjoyed this software but recently i changed phone and fornsome reason it wont connect. It just hangs and does nothing. The thing is i managed to connect it once nd after that nothing. In have the other configurator and it connects with that app but not with the ez gui Try to check BT_NEW it...
by rukie
Mon Jul 28, 2014 12:27 am
Forum: Ideas
Topic: What you don't like in EZ-GUI?
Replies: 51
Views: 16641

Re: What you don't like in EZ-GUI?

I have enjoyed this software but recently i changed phone and fornsome reason it wont connect. It just hangs and does nothing.

The thing is i managed to connect it once nd after that nothing. In have the other configurator and it connects with that app but not with the ez gui
by rukie
Tue Jul 22, 2014 3:05 am
Forum: Ideas
Topic: QUAD PID tuning problem please help
Replies: 1
Views: 1373

QUAD PID tuning problem please help

Hi, My quad as fun as it flies has a tiny problem I noticed. Whenever i do a fast forward flight and stop it tends to over correct by the way this is in MANUAL mode GYRO only. Up to the point that it pitch's back A co-flyer tells me its like a phenomena that happens with helicopters and they call it...
by rukie
Tue Jul 22, 2014 3:02 am
Forum: Ideas
Topic: Different Yaw Speed for clockwise and counter clockwise
Replies: 6
Views: 3404

Re: Different Yaw Speed for clockwise and counter clockwise

All motors are ok. I noticed this both on two frames I used same symptoms.

Anyway I increased my YAW rate and seems to have a helped a little bit. Hope this help others who have the same problems.
by rukie
Mon Jun 09, 2014 3:27 am
Forum: Ideas
Topic: Different Yaw Speed for clockwise and counter clockwise
Replies: 6
Views: 3404

Different Yaw Speed for clockwise and counter clockwise

Hi Guys, I currently finished a build with the following components. DJI f450 clone Witespy EV3 Blackboard Sunnsysky 2216 900kv Rctimer 30amps esc I noticed as said in the subject that my yaw speed differs from the two directions. My clockwise seems to be sluggish even feels that its struggling to t...