MultiWii

Ok, I figured it out. 115200 is hardcoded in MW_OSD.ino ~line 49. I changed that and two lines below and it works at 19200. Great! Now the problem is that, to configure it in the GUI, I'll need to build the GUI to talk to the OSD at 19200. I've got the source, and I've installed Eclipse and JRE, but...

I'm trying to run MWOSD at 19200 baud from a flip32 serial port. You would think that #define SERIAL_SPEED 19200 would do that, but after compiling like that, it just keeps on at 115200. In fact, in the code, I find nowhere that the SERIAL_SPEED define is even used. Anyone offer any insight? Thank y...

Do I need to change msp_baudrate down to 19200 for softserial 3? If I do that, I lose the connection to the bluetooth on UART1.

Yes, I saw that somewhere too. I tried a compile for 19200. Nothing but gibberish on the OSD.

Been fighting with serial ports! I'm trying to run a Bluetooth module, a miniumOSD, and a GPS with cleanflight. From various posts, and Hydra's video, it looks like this is possible. I just can't seem to get any communication on the softserial 3 (pins 5&6 on a flip32+. I have: features: GPS, SOF...

Built with the gcc-arm-none-eabi-4_8-2014q2 from lauchpad.net, on a Debian virtual machine the hex comes out to 220kb. Does anyone care?

What is the firmware size limit for the Naze32?

I finally managed to make a build of the current source from git using Sourcery GCC EABI and Eclipse in Windows 8. The hex file came out at 234 kb. What's the limit? I see that the compiled binary from git is 167. I'm sure using a different compiler caused a bit of variance in size, but that seems e...

Another option is a FTDI usb/serial cable or breakout board. You can connect that to the serial port where your BT module is. I haven't had much luck with uploading sketches OR the config gui via Bluetooth. My windows 8 machine always makes 2 bt-serial com ports, and neither will connect. Ez-Gui thr...

Hello, I'm using the latest unlocked version of ez-gui with the EOSBandi NAV version of Multiwii 2.3. On the Mission Planner screen, next at the top, to the left of the Draw button, there is a constantly spinning circle. I can draw and edit waypoints, but there seems to be no way to upload them to t...

Hello, I'm new to this so please bear with me. Had some problems with navi b7. I'm finding that changing YAW_DIRECTION has no effect on which way the tail servo in a tri-copter corrects an induced yaw. Always it goes opposite... Which doesn't work for me. Back in 2.2 changing the YAW_DIRECTION defin...

After further troubleshooting, I can visually verify that changing the YAW_DIRECTION variable has no effect on the how the tricopter corrects for yaw in 2.3. In 2.2 changing between 1 and -1 causes the servo to tilt either opposite or the same direction as the induced yaw. Is the YAW_DIRECTION defin...

I also have this problem. Much searching shows man yaw problems, but not this exact thing. Has there been any progress by anyone?