Search found 43 matches

by Olddude
Sun Mar 29, 2015 2:18 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

No i cant connect to the gui
only over usb if i fail a flash attempt .
I can flash using the utilities i mentioned
I would need TC to chip in otherwise i just have a brken board i guess
by Olddude
Sat Mar 28, 2015 12:45 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

yep I can flash it when its connected to ftdi
and i can run the GUI only if i let it fail a flash attempt over usb and then it connects and i can change settings ??
still no idea what the problem is on the board ??
by Olddude
Sat Mar 28, 2015 12:40 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

ok so i couldn't wait i tried tx rx approach and I got to flash the hex \o/ It totally worked over tx rx I can flash but unfortunately ...result is the same Still connect to usb click on connect in CF and all lights go on . Let a flash attempt 1st fail then connect it works ? I ll try once more .,.....
by Olddude
Fri Mar 27, 2015 11:45 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

CHeers
I try TX and RX approach ..
with my FTDI
so i dont power the board at all ?
Or power it from the FTDI ?

When i find the hex file ...
I shall try
by Olddude
Fri Mar 27, 2015 7:05 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

v - no reboot sequence v - flash on connect v - full chip erase o - flash slowly Thanks a lot for your help FedorCommander unfortunately I have tried many and all and again all combination with and without boot loader short . I really have exhausted all combinations . The only reply i get from the b...
by Olddude
Thu Mar 26, 2015 1:41 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

Noone can give any help on my Naze board ?
I have de-soldered all pins cleaned the board with alkohol and I checked the board with a magnifying glass but I cannot work out what it could be

https://www.youtube.com/watch?v=7qh1gF1DDUw
by Olddude
Mon Mar 23, 2015 11:42 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

Instead of writing it all up
here is a Vid
[youtube]https://www.youtube.com/watch?v=7qh1gF1DDUw[/youtube]

https://www.youtube.com/watch?v=7qh1gF1DDUw

PLEASE someone tell me what is wrong with this board ?
Really I am puzzled
I have had naze board for some time but this sort of error i never had
by Olddude
Mon Mar 23, 2015 2:56 am
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 873
Views: 333021

Re: MultiWii OSD - MWOSD

Something odd happened today My osd reads MWversion 0.0 ? what can i do to fix this 0.0 means I cannot enter stick mode I tried KVteam and MWosd It happens on both so I fear my naze32 is the problem > worked perfect yesterday ? I measured with a voltmeter rx and tx pin and both give around 3v ..so i...
by Olddude
Fri Jan 23, 2015 1:34 pm
Forum: FPV, OSD, Cameras
Topic: Help with KV MinimOSD and Naze32 setup!
Replies: 4
Views: 4828

Re: Help with KV MinimOSD and Naze32 setup!

U have the right diagram there .. this is the one to follow but i dont use cleanflight .. So cant help there RSSI i run from channel 2 of the RX into a analogue converter U see it at the bottom of the diagram then into nthe TXT pin on the minimosd In the OSD settings u set it to ADC and put 5V refer...
by Olddude
Fri Jan 23, 2015 1:22 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

Naze32 hardware discussion thread

As said plz post in Cleanflight thread if u follow the copy gang


dude orange ?? seriously ? I fear ur on ur own ..I dont touch that POS if it was for free
by Olddude
Wed Dec 17, 2014 2:06 pm
Forum: Software
Topic: Cleanflight aka Multiwii port to STM32 F10x and F30x
Replies: 761
Views: 1571591

Re: Cleanflight aka Multiwii port to STM32 F10x and F30x

?? and that has woot to do with anything ? OF course it easier then actually addressing the issue Your lack of documentation and test cases....... But what did i expect LOL and BTW U ALL are just little brats :U, jobless numb nut, as well as TC I ask for proof of concept not ur wishy washy BS video ...
by Olddude
Tue Dec 16, 2014 3:31 pm
Forum: Software
Topic: Cleanflight aka Multiwii port to STM32 F10x and F30x
Replies: 761
Views: 1571591

Re: Cleanflight aka Multiwii port to STM32 F10x and F30x

So the youtube vid i watched is prove of one shot 'working' then ??? Me fail for words....Amazing ... I put it simple. My one and only comment on this BS ... imagine at work this thinking would be implemented ... Scenario: I just make it worse to see if the new stuff makes it better compared to the ...
by Olddude
Mon Dec 15, 2014 3:29 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

but, you CAN have an OSD AND BT working off the same RX TX of the NAZE....just make sure the OSD only has its RX connected (to NAZE TX, of course) so it doesnt conflict with BT...this means you cant use OSD features like KVOSD's ability to change PIDS, but normal display operation will work fine......
by Olddude
Mon Dec 15, 2014 3:16 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

time for a reply .. AND i wont quote anyone because it is directed at so many....... SO, Get ready for a rant Soooo Sick of all this No wonder timcop fuckin hates this ... all this waffle with no content anyone looking for something will have to read to so much of ur ego driven bollox on here .. I a...
by Olddude
Sun Dec 07, 2014 3:43 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

I still really have not been able to work this out anyone plz can advice ? or knows how to do this : And while we are ont he topic of blue-tooth .. I am wondering .... In the past it the NAZE had one set of RX tx and u connect your OSD to it. Thats it . Now we have softserial ...? I was wondering ca...
by Olddude
Sun Nov 09, 2014 4:30 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

And while we are ont he topic of blue-tooth .. I am wondering .... In the past it the NAZE had one set of RX tx and u connect your OSD to it. Thats it . Now we have softserial ...? I was wondering can i now connect my BT module and have OSD and BT working on the naze32 board ? I tried my BT on the R...
by Olddude
Wed Sep 03, 2014 10:38 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

@Animal60 I don't understand ?how does anything to do with the TX has input on the VBAT voltage reading ? The VBAT +/- connects to the MINIMOSD then displays this on the screen At no stage is there any input from the tx ? Cold you explain what u mean ? ' setting is changed to cells on "taranis&...
by Olddude
Wed Aug 27, 2014 11:21 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

yep my VBAT sensor is dead
i been send a dead one :(
anyway i had ordered already another (need it anyway ) and the black one I received works
I think its Hextronic that makes them
Anyway the red one u can have for 15 EUR if ya want ..
Flys well i flown it 2 times just the vbat doesnt work
by Olddude
Mon Aug 25, 2014 11:12 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

seems like my question got ignored or missed or indeed noone knows ? anyone has an idea what could be the cause of a non working VBAT connector on the board the board is new all works but the VBAT feature reading 0 volt at all time .. Feature VBAT is enabled and connected so I am afraid something on...
by Olddude
Sat Aug 23, 2014 6:24 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

Hello I been setting up another quad and all works fine >>> apart from the VBAT feature ? I know its kinda odd as there is nothing to do but enable it in feature . TC? Any idea why or how i can trace the error . 3s is connected to VBAT but it reads nothing 0.0V on my minimosd ? I don't even understa...
by Olddude
Sat Jul 19, 2014 10:34 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389848

Re: KV Team Multiwii OSD

Hello Carlo
YES of course
offset low
Sorry my bad

Capture.JPG
(12.97 KiB) Not downloaded yet


I Actually now ended up at 60 :)
and think i could do with 61 0r 62
by Olddude
Fri Jul 18, 2014 10:54 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389848

Re: KV Team Multiwii OSD

my current sensing is kinda working Its almost accurate now I set it to 58 and offset high 8 and this seems to kinda work for the sensor i use. other question I thought NAZe32 board has now more UARTS and i can connect the Naze32 to PC and have the MINIMOSD connected but for me this still dont work ...
by Olddude
Tue Jul 15, 2014 12:41 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389848

Re: KV Team Multiwii OSD

The osd tend to hang or restart i have the exact same in 2.3 KVteamosd It happens when i scroll past a certain item in the position screen (cant remember which i think the last LOL ) Just dont do it and all is good. U only need to change the positioning once then u hardly ever in that menu anyway S...
by Olddude
Sun Jul 13, 2014 6:48 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389848

Re: KV Team Multiwii OSD

Oh yes. i think its almost there 1100mah is about 6.30 on my mini quad . So I doubled it to 60 .which is max, and now its a tiny bit too high. It said 1100 and really charged just about 1000 So one more step and it should be spot on. Cant test now its too windy . Will report back Once i done this co...
by Olddude
Sat Jul 12, 2014 11:37 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389848

Re: KV Team Multiwii OSD

right , i had a few flights today and it doesn't look good its still out I would say almost exactly by 100% too much I put back in between 1000 and 1100 and the count was every time well over 2200 mah Also the hover AMP reading ws 24 - 28 AMP that's not right either Soooooo question now is what do i...
by Olddude
Thu Jul 10, 2014 11:37 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389848

Re: KV Team Multiwii OSD

THANKS a lot guys I might actually have a working settup http://i.imgur.com/4s73u1I.jpg This gives me around 0.4A for just running all the gear I have on and that looks about right to me . What i learned is that if i move up now to 9 or lower on 7 the amp increases. So i assume this 8 must be right....
by Olddude
Thu Jul 10, 2014 9:21 am
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389848

Re: KV Team Multiwii OSD

Hi KV thanks for the explanation Problem is i fail at your 1st instruction already - tune the sensitivity according the sensor´s manual; I have no idea what the sensitivity is or where I can find a Data Sheet I have posted my Power module and its from HK I dont think I ll find much in the way of a D...
by Olddude
Tue Jul 08, 2014 10:01 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389848

Re: KV Team Multiwii OSD

Thank a lot Carlo
i believe its this

http://hobbyking.com/hobbyking/store/__ ... Cable.html
by Olddude
Tue Jul 08, 2014 3:50 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389848

Re: KV Team Multiwii OSD

Yes TY:) but i read this page a hundred times now Sensor sensitivity Typically is 20mV/A or 40mV/A. This info must be on sensor data sheet. This bit i don't know ? that was my question . I have APM power module with he BEC I In the 2.3 gui the value can be set from 0 - 60? So does that mean the valu...
by Olddude
Tue Jul 08, 2014 1:21 pm
Forum: Software development
Topic: KV Team Multiwii OSD
Replies: 1021
Views: 389848

Re: KV Team Multiwii OSD

GREAT release 2.3 but i cannot get Ampere to show correctly What am i doing wrong I don't really understand the sensitivity settings I should see something around .2 to .4 A when it is juts standing there due to all the gear running cam VTX, FC, etc .. but when i fly i get really wild reading .....n...
by Olddude
Tue Jul 01, 2014 1:06 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

3 months update NAZE32 ! all other boards are just PAP I flown MANY boards and i wont name any names but NAZE32 kicks all of em just 3 moths now i run the NAZE board and have to SAy its awesome .. Now, a word or 2 on the BS tc has to put up with here and i shall even scream! THIS Is AN OPEN SOURCE P...
by Olddude
Fri Jun 20, 2014 4:17 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

Best board in da world Iam more flying less on forums Question ...i might be wrong i have not checked but is it right that latest firmware lets yu use , say a BT module as well as the minimosd >? Has he naze32 gotten more then 1 serial port? I seen some vid a dude using pins next to the 4 & 5 fo...
by Olddude
Tue May 27, 2014 4:53 pm
Forum: FPV, OSD, Cameras
Topic: MinimOSD, where to buy?
Replies: 10
Views: 5893

Re: MinimOSD, where to buy?

.....Bring it back to life ..... pssst check the price... m Took 6 days to get to my door CHINA to EUROPE (i noticed HK shipping is really bad now I guess since that lipo/scanning packages rule and usually i buy from China one week to your door , at least to EU . Yes these are the new boards I have ...
by Olddude
Thu May 01, 2014 1:50 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

Get a PPM receiver, end of story. LOL, Cheers Exactly my thought So i took it all out already and instead I am out flying now I just want to do it cause its possible But apparently I cant so instead I am out to play with it for now . waiting on D4R-II but even then i don't really think it needs GPS...
by Olddude
Sun Apr 27, 2014 3:08 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

Get a PPM receiver, end of story. LOL, Cheers Exactly my thought So i took it all out already and instead I am out flying now I just want to do it cause its possible But apparently I cant so instead I am out to play with it for now . waiting on D4R-II but even then i don't really think it needs GPS...
by Olddude
Sun Apr 27, 2014 9:45 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

The dreaded GPS set-up LOL I have now enable GPS and plugged the rx tx into channel 3 and 4 on the NAZE, also enable gps and moved THR and YAW to channel 5 and 6 . Problem now is THR and GEAR move together ?? I plug in Throttle to my RX and it moves THR and Yaw slider in Baseflight together ? HELP:)...
by Olddude
Sun Apr 27, 2014 9:38 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

double post :) sorry
by Olddude
Sat Apr 26, 2014 6:56 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

OHH . Yes I checked compass by using an actual compass
And it s odd but if i leave mine at 0 its correct anything else and the compass is off
by Olddude
Sat Apr 26, 2014 6:51 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

yeah align yaw or all 3 It says so here : m Fly's perfect now ... Also had to add a ferrite on the 12V in VTX now all the lines in the in my Fatsharks from motor and esc noise are also gone . Makes sense because everything is so close together Definitely need one or two ferrite rings if its mini qua...
by Olddude
Sat Apr 26, 2014 5:56 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

Another few hours gone but its done the MINI H Quad is my new fav. IMG-20140426-00019.jpg I had some issues with the PID's but just restarted and thought this through one more time ... This Quad is tiny ...ergo ..corrections need to be tiny SO what i did is half every value in pid settings and it fl...
by Olddude
Sat Apr 26, 2014 3:11 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

I have received my 2nd Board yesterday This one is for a MINI H Quad SO all went well ..Kinda After all this my 2nd attempt I must be pro by now LoLoLoL but of course I am not , though this time i was adventurous and i installed the NAZE facing 90 degree CW . So the USB sticks out on the right side...
by Olddude
Fri Apr 25, 2014 12:13 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

@Tr3TopFlyer A really good start is this thread i know its massive but i made my mini Quad fly just reading this thread Also really good start is the manual ?:) m Anyone need a case let me know . We went to town and printed ourself a bunch of naze32 rev 5 cases. Its impossible to find any so I have ...
by Olddude
Thu Apr 24, 2014 4:37 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377168

Re: Naze32 hardware discussion thread

Afternoon all I just registered really for this and to thank you all for the posts and help in this MEGA thread that it is now I have been studying this thread for months and months and I can report : It flys : I am still waiting on a new GPS unit and then we tackle the feature again ..and we will w...