MultiWii

scrat wrote:And do not use WinGUI with mwii v2.3.

Care to detail why not?

For SunnySky motors http://www.buddyrc.com fast and competitive pricing, out of OH, I ordered Sunday got my 4 motors early Wed.

WiteSpy is not a good place to order right now, he's very busy and it's a one man show, if you can wait for 2 weeks go for it, but I'm in NC and the shipping is still 2 weeks

I used a jumper from an old motherboard, did the truck just fine!

Thanks Waltr for the clue, took me some time but finally got it to work, seems that on the crash my jumper got lost and that caused the buzzer to go crazy, in case somebody runs into the same thing see pic.

I can't see any jumpers on mine, will that be the reason why my buzzer is going crazy?

Hello fellow flyers, I need some help with my Quad after a crash, all is well with MultiWii, arms, gets GPS lock and spins motors with no problem. My problem is with the Low Voltage Alarm Buzzer, after the crash my buzzer was going crazy, like the sound it makes with low voltage, now any time I powe...

First off, my specs from the top of my head: HT-450 with MultiWii (RTF) Hoverthings 450HT G10 MegaEZ 3.2 black ESC 20 AMP readytofly SimonK Motors 250w 1050Ka 1045 slow fly prop Today I was flying my Quad after finally getting GPS hold to work, I also added a cheap gimbal without all the bells, all ...

I just ordered the MinimOSD Apr 1 and got shipped today (Apr 3), if I'm lucky I may get it by Saturday.
By the way Jhitesma, do you have any leads to any info on how to install it? I ordered but I'm clueless what kind of setup I'm facing

I did some testing today, with the settings I proposed before and GPS hold is working great, it was very windy (8-9mph) and the quad did way better that I was hoping for! The bad thing was Baro, maybe because of the bad weather. While doing GPSH, I went to Baro and my quad came down like a rock, I w...

haydent: I understand what you mean, maybe I did not explain myself correctly, see pics: pic 1 shows my current Aux 1 settings: Angle to Baro pic 2 shows proposed settings: Angle to Baro+Angle I hope that clarifies a bit what I'm trying to do, I'm not sure if such combination is even possible or ho...

Thanks for that tip, since I only have aux 1 and 2 can I do the combination aux 1 to be: angle (low) Horizon + Baro (high)? And you maybe right, maybe I'm not getting enough sat fix, I did a test with only GPS hold and still goes to the right very fast, I will attempt to do Baro calibration and chec...

Is the combination of Baro and GPS a bad combination? When using Baro the quad is stable, goes down for a bit but corrects altitude and stays at the desire altitude depending on wind speed, when I use GPS hold while Baro is active the quad drifts to the side very fast, if I turn GPS hold off the qua...

Well, I'm lucky, he's back taking orders!

Thanks for the info PatrikE, I was going to order from witespy but he's not shipping or taking any orders, I was hoping somebody may know a different source and most important not from China, one week is Ok, a month is not

Hello fellow flyers,

What is the best and faster source to get the MinimOSD?

A video on how to add this to the code will be a welcome for us new to the quad world!

Looks like something I need now!
Great work Julian!

Something got "fry"
Good luck!

Agree, I'm just glad I went exploring the forum and bumped into the same issue, thanks Waltr for all the help

I sorted my issue, the flaps need to be NORM FLAP +100 and LAND FLAP to -100 (or vice versa).

Thank you, Thank you, thank you MikeF74, that simple explanation made me realize I had the same problem, I was asking about this same issue perhaps in the wrong place but your comment took me to the solution of my issue Now, can anybody explain what is the correct/best combination so I don't conflic...

Getting chills down my spine, I have a set of props that I have crash, hit and abused beyond the capabilities of the props, and they are cheap plastic!
I'm getting a new set, the picture on my mind of my Quad coming down from 500 ft at high speed into the ground is not a pretty one...

Thanks Waltr, my values are at 1500 beginning - 2000 end point, all my controls work with the exception and the only one not working, Aux 2. Aux 1 is working so I have no clue why Aux 1 works but Aux 2 wont, if the setting on the MultiWiiGUi were not correct or the transmitter was on Heli mode Aux 1...

Hello all, I'm new to the fantastic world of MultiWii, beginning to learn a lot thanks to this great space. Two months ago I got a Witespy MultiWii HT-450 RTF with the Mega EZ3.21 black and Ubox, all was great until my radio got "un-binded," finally got the radio bind to the Spektrum and d...