If you arm or disarm via aux this is coverd by optionsbeep.
Nils
Search found 708 matches
- Fri Feb 14, 2014 2:36 pm
- Forum: Software development
- Topic: Added ARMEDBEEP option
- Replies: 2
- Views: 1827
- Fri Jan 24, 2014 7:47 am
- Forum: Software development
- Topic: KV Team Multiwii OSD
- Replies: 1021
- Views: 397501
Re: SW Development on Minim Osd
thank you scrat! will try that after I move to the new software
- Thu Jan 23, 2014 11:00 am
- Forum: Software development
- Topic: KV Team Multiwii OSD
- Replies: 1021
- Views: 397501
Re: SW Development on Minim Osd
So after some absence I am back onboard. A few questions: Is it possible to bring back the preview of the OSD in the gui? I think it was very handy... Are the vertical bars left and right of the artificial horizon gone or can they still be activated, I liked this fighter pilot style. The OSD is now ...
- Mon Jan 20, 2014 11:09 pm
- Forum: Software development
- Topic: KV Team Multiwii OSD
- Replies: 1021
- Views: 397501
Re: SW Development on Minim Osd
Ok, it's working again, did the eeprom clean and reuplaoded the code, now it seems to work, have to test it on the video though.
Thanks for helping me guys
Thanks for helping me guys
- Mon Jan 20, 2014 9:16 am
- Forum: Software development
- Topic: KV Team Multiwii OSD
- Replies: 1021
- Views: 397501
Re: SW Development on Minim Osd
I do not know how I killed the bootloader with the eeprom cleaner. I did not use eeprom clean this time after my collegue rescued the osd. Could this be the reason why it is not working? as said, other sketches work and the upload of the sketch gives me no errors... How can I tell if the sketch is r...
- Tue Jan 07, 2014 1:36 pm
- Forum: Software development
- Topic: KV Team Multiwii OSD
- Replies: 1021
- Views: 397501
Re: SW Development on Minim Osd
Hi, I accidently deleted the bootloader when I uplaoded the eeprom clean sketch. A friend of mien amnaged to reburn the bootloader. Sketches like blink etc. are working. I uplaoded the KVteam sketch but when I connect via the GUI I cannot save any data, when I hit read after I pressed write everythi...
- Thu Oct 17, 2013 7:24 am
- Forum: Ideas
- Topic: What about using BlinkM - like Naza style led
- Replies: 5
- Views: 3118
Re: What about using BlinkM - like Naza style led
Get a Pilotlamp,
it is fully integrated and has a superloud buzzer.
Cheers Nils
it is fully integrated and has a superloud buzzer.
Cheers Nils
- Wed Oct 16, 2013 3:04 pm
- Forum: Shields, boards and sensors
- Topic: Serial GPS vs. I²C GPS
- Replies: 11
- Views: 3877
Re: Serial GPS vs. I²C GPS
Hi,
I adressed this issue before, but I think I posted in another thread that the osd freezes...
http://www.multiwii.com/forum/viewtopic.php?f=8&t=2866
Nils
I adressed this issue before, but I think I posted in another thread that the osd freezes...
http://www.multiwii.com/forum/viewtopic.php?f=8&t=2866
Nils
- Wed Oct 16, 2013 12:55 pm
- Forum: Shields, boards and sensors
- Topic: Serial GPS vs. I²C GPS
- Replies: 11
- Views: 3877
Re: Serial GPS vs. I²C GPS
It was with the serial gps yes. I heard there is conflicting with the Serial outputs if there is a sat present when pwoering everything up. This is mentioned in the RCGroups Thread too. I have a Flyduino 2560 QuadX MultiWii 2.2 with Bluetooth on Com1, GPS on Com2 and a mobidrone OSD on Serial 3. Nee...
- Tue Oct 15, 2013 10:39 am
- Forum: Shields, boards and sensors
- Topic: Serial GPS vs. I²C GPS
- Replies: 11
- Views: 3877
Re: Serial GPS vs. I²C GPS
Hi, had a nice calm day yesterday, so I tested RTH and PH. I configued the Aux switches to set PH with Baro and Mag mode and the copter stood nailed to the sky for 5 minutes only drifting in a radius of 2m, I had time for a chat with a pedestrian and getting a soda out of the car without touching my...
- Mon Oct 14, 2013 6:09 am
- Forum: Shields, boards and sensors
- Topic: Serial GPS vs. I²C GPS
- Replies: 11
- Views: 3877
AW: Serial GPS vs. I²C GPS
Hey, tested it in the field yesterday.Looks very promising GPS hold and home are working and beepi g is not affected. Now I need to check the baro hold together with gps hold and check the cycletime in the lab.
Cheers
Nils
Cheers
Nils
- Sat Oct 12, 2013 7:54 am
- Forum: Shields, boards and sensors
- Topic: Serial GPS vs. I²C GPS
- Replies: 11
- Views: 3877
AW: Serial GPS vs. I²C GPS
I already use 2.2 since day one and I am pretty happy with it. I wanted to sa that I pwst used GPS on 2.0 or 2.1 so there may be improvements I missed out.
- Fri Oct 11, 2013 5:52 am
- Forum: Shields, boards and sensors
- Topic: Serial GPS vs. I²C GPS
- Replies: 11
- Views: 3877
AW: Serial GPS vs. I²C GPS
Has ghere be a change regarding work load between 2.1 and 2.2? Maybe I used 2.0 .
- Thu Oct 10, 2013 9:53 am
- Forum: Shields, boards and sensors
- Topic: Serial GPS vs. I²C GPS
- Replies: 11
- Views: 3877
Serial GPS vs. I²C GPS
Hi, about a year ago I tried a Serial GPS (Flyduino) on my Flyduino Mega 2560. I noticed a massive increase on cycletime if the GPS is connected, this affected the barohold and the beeping routines due to the affected cycle times. I want to sue the GPS for FPV flights so I can see coordinates in OSD...
- Mon Oct 07, 2013 1:56 pm
- Forum: Software development
- Topic: KV Team Multiwii OSD
- Replies: 1021
- Views: 397501
Re: SW Development on Minim Osd
Hi, thank you for that clear statement, now I am even more looking forward because I have all features I needed to hack into that mobidrone! As I power Cam and FPV TX with same 12V 3s Lipo as my FC I do not have to do the 12V mod, right? I only need to power the FPV TX with 12V and the OSD routes 12...
- Mon Oct 07, 2013 12:32 pm
- Forum: Software development
- Topic: KV Team Multiwii OSD
- Replies: 1021
- Views: 397501
Re: SW Development on Minim Osd
Hi, just ordered a minim 1.1. Is there a guide for the newest OSD dev, the guide provided in the Wiki seems to be outdated. I just played around with the newest GUI but some items are not displayed in the example screen even if I activate them (note: no hardware attached yet) Last Question: Is baro ...
- Mon Oct 07, 2013 9:47 am
- Forum: Software development
- Topic: KV Team Multiwii OSD
- Replies: 1021
- Views: 397501
Re: SW Development on Minim Osd
Hi, last year I bought a Mobidrone OSD but the develepment seems dead, I managed to keep it working by hacking into the Multiwii MSP after each update but this and the hardware is a real pain. Would you guys recommend to switch to MinimOSD or is it possible to run this software on a mobidrone OSD? I...
- Tue Oct 01, 2013 9:27 am
- Forum: Software development
- Topic: Release v2.3 is coming soon... prepare
- Replies: 96
- Views: 47321
Re: Release v2.3 is coming soon... prepare
Alexinparis wrote:Ok, why not.
But note staying below 25 deg is quite achievable even by hands
Thanks,
But I like to start 45° and give full throttle. That impresses the ladies .
Someone volunteers to code that? I have no access to svn anymore!
Nils
- Mon Sep 30, 2013 10:13 am
- Forum: Software development
- Topic: Release v2.3 is coming soon... prepare
- Replies: 96
- Views: 47321
Re: Release v2.3 is coming soon... prepare
Hi, I did a small overview with the new PRE Code and I stumbled upon a small thing I'd like to adress: I like to start action style with the copter in my hand tilted and then start engines and throttle up in acro and let it loose, I need to fly with my Camera below the copter and becuase of vibratio...
- Fri Sep 20, 2013 2:15 pm
- Forum: Ideas
- Topic: wishlist for v2.3
- Replies: 104
- Views: 44165
Re: wishlist for v2.3
Hi,
where can I find the code for the three warning stages for power consumption?
It is not properly included in alarms.cpp in shared trunk, so is it even coded yet?
Nils
where can I find the code for the three warning stages for power consumption?
It is not properly included in alarms.cpp in shared trunk, so is it even coded yet?
Nils
- Thu Aug 15, 2013 8:15 pm
- Forum: Software development
- Topic: Safety alarm!!!Copter want to take off immediately after arm
- Replies: 21
- Views: 13878
AW: Safety alarm!!!Copter want to take off immediately after
I know just wanted to point out a problem. A lot of people would spam the boards and ask why their copter does not fly. An there will by a lot of RTFM answers. . I met a lot of people that fly "superstable" all the time. They have mag baro and acc always enabled and not bound to an aux cha...
- Thu Aug 15, 2013 7:44 pm
- Forum: Software development
- Topic: Safety alarm!!!Copter want to take off immediately after arm
- Replies: 21
- Views: 13878
AW: Safety alarm!!!Copter want to take off immediately after
No, i have mag and acc on same aux. This will prevent me from starting in stable Mode maybe a reset of the headibg would be enough.
- Thu Aug 15, 2013 6:58 pm
- Forum: Software development
- Topic: Safety alarm!!!Copter want to take off immediately after arm
- Replies: 21
- Views: 13878
AW: Safety alarm!!!Copter want to take off immediately after
Thats what I tried to say. I think it is an easy fix if this behavior is not intended. Maybe there is a situation in which this is needed. Btw I think the failsafe that prevents the copter to arm if it is tilted to kuch should be optional or at least only if acc mode is on. I like to start the copte...
- Thu Aug 15, 2013 1:56 pm
- Forum: Software development
- Topic: Safety alarm!!!Copter want to take off immediately after arm
- Replies: 21
- Views: 13878
Re: Safety alarm!!!Copter want to take off immediately after
Hi, I don't know if this problem has been adressed befor: the same goes to the compasshold function. If the mag mode is enabled in 2.2 the copter tries to turn into that direction as soon as you throttle high enough to let the governor to kick in. it this intended? headfree mode is reset correctly b...
- Mon Aug 12, 2013 10:25 am
- Forum: General discussions
- Topic: Parameters Lost during flight
- Replies: 12
- Views: 4910
AW: Parameters Lost during flight
Thank you Alex. I will keep an eye on that. And report back.
Nils
Nils
- Sat Aug 10, 2013 7:48 am
- Forum: General discussions
- Topic: Parameters Lost during flight
- Replies: 12
- Views: 4910
AW: Parameters Lost during flight
I played around with the profiles but did not enable it in the code.
- Sat Aug 10, 2013 7:34 am
- Forum: General discussions
- Topic: Parameters Lost during flight
- Replies: 12
- Views: 4910
AW: Parameters Lost during flight
Hey... Happened again. Maybe it is the Android tool from EZ...
- Sun Jul 21, 2013 9:28 pm
- Forum: General discussions
- Topic: Parameters Lost during flight
- Replies: 12
- Views: 4910
AW: Parameters Lost during flight
O. I could arm via switch on first try and seconds later everything was gone...
- Tue Jul 16, 2013 8:59 pm
- Forum: General discussions
- Topic: Parameters Lost during flight
- Replies: 12
- Views: 4910
Parameters Lost during flight
Hi, I started my Copter with my Aux 2 switch and throttled up. All of a sudden it flipped, I disconnected the Lipo and restarted the FC and noticed there where no reaction while I tried to arm the motors, I fired up my mobile and discovered that all PID parameters where 0 and all aux switches where ...
- Tue Jul 09, 2013 7:54 am
- Forum: Software development
- Topic: NOTICE: Trunk has been migrated to .cpp/.h files
- Replies: 64
- Views: 27078
Re: NOTICE: Trunk has been migrated to .cpp/.h files
Hi,
may I ask for a favor?
I have not much spare time left because of family issues.
Is it possible to make ashort howto/faq on how to set up /compile this and make it a sticky post.
sorry if already happened.
Nils
may I ask for a favor?
I have not much spare time left because of family issues.
Is it possible to make ashort howto/faq on how to set up /compile this and make it a sticky post.
sorry if already happened.
Nils
- Tue Jun 18, 2013 7:05 am
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 128639
AW: mobiDrone nano arduino OSD for MultiWii with PID config
Can do.
But i shared rhe changes three posts before
But i shared rhe changes three posts before
- Mon Jun 17, 2013 7:14 pm
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 128639
AW: mobiDrone nano arduino OSD for MultiWii with PID config
No worries mate. I figured it out eventually. And I learned a bit about MSP this way .
Nils
Nils
- Sun Jun 16, 2013 1:38 pm
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 128639
Re: mobiDrone nano arduino OSD for MultiWii with PID config
Hi, got it sorted out. You have to do as shikra said but edit the msp_mobidrone section as follows to send the lshifts corresponding to the old 2.1 protocol. took me some tries to realize that. case MSP_MOBIDRONE: headSerialReply(10); serialize16(cycleTime); serialize16(i2c_errors_count); serialize1...
- Fri Jun 14, 2013 8:02 pm
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 128639
Re: mobiDrone nano arduino OSD for MultiWii with PID config
Hi,
shikra, unfortuneally your solutions somehow does not work for me.
The arm box signal is not recognized in OSD.
But If I activate headfree, the OSD is thinking the copter is armed.
weird...
Nils
shikra, unfortuneally your solutions somehow does not work for me.
The arm box signal is not recognized in OSD.
But If I activate headfree, the OSD is thinking the copter is armed.
weird...
Nils
- Fri Jun 14, 2013 12:37 pm
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 128639
Re: mobiDrone nano arduino OSD for MultiWii with PID config
Hi,
I just found out how to get the checkboxes working again.
it is a bad wokraround, but it will do until the msp changes again. The target is the same but on mobidrone side and setup specific
but i think your solutions is better, I only have to change multiwii code.
thank you!
I just found out how to get the checkboxes working again.
it is a bad wokraround, but it will do until the msp changes again. The target is the same but on mobidrone side and setup specific
but i think your solutions is better, I only have to change multiwii code.
thank you!
- Thu Jun 13, 2013 2:56 pm
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 128639
Re: mobiDrone nano arduino OSD for MultiWii with PID config
Hi,
the homepage and shop is down, I think the mobidrone Projekt is abandoned .
Is anyone interested in reverse engineering the code?
Or is it possible to use another osd software like minimosd on the mobidrone hardware?
Nils
the homepage and shop is down, I think the mobidrone Projekt is abandoned .
Is anyone interested in reverse engineering the code?
Or is it possible to use another osd software like minimosd on the mobidrone hardware?
Nils
- Wed Jun 12, 2013 12:31 pm
- Forum: Getting Started - MultiWii config and setup
- Topic: How to use Serial Ports 1, 2, 3
- Replies: 7
- Views: 3699
Re: How to use Serial Ports 1, 2, 3
Similar Question here: I use a Flyduino Mega and I cosntantly use a Mobidrone OSD on the serial port that connects to ftdi, and have to disconnect it in order to connect ftdi. I also use GPS on Serial2 (White connector) and use a serial3 for the sum input of my RX. Although I am not using the GPS mo...
- Mon Jun 10, 2013 9:22 am
- Forum: Software development
- Topic: Patch: LED Flasher
- Replies: 35
- Views: 19076
Re: Patch: LED Flasher
Hi,
I just isntalled a transistor today - really nice work Tommie.
Blinking LEDs gave my copter the extra look.
Nils
I just isntalled a transistor today - really nice work Tommie.
Blinking LEDs gave my copter the extra look.
Nils
- Mon Jun 03, 2013 2:16 pm
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 128639
Re: mobiDrone nano arduino OSD for MultiWii with PID config
Hi,
I now had time to fly a little (damn weather - it is supposed to be summer now).
I noticed, that the OSD does not notice arming and disarming anymore - so the flight time counter is not working anymore.
Nils
I now had time to fly a little (damn weather - it is supposed to be summer now).
I noticed, that the OSD does not notice arming and disarming anymore - so the flight time counter is not working anymore.
Nils
- Fri Apr 19, 2013 7:38 pm
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 128639
Re: mobiDrone nano arduino OSD for MultiWii with PID config
Hi,
Finally found some time to fly 2.2 today.
Sadly it really rocks and I cannot go back Td 2.1.
So what is the difference between 2.1 and 2.2 MSP?
Is it really hard to apply hat change to Mobidrone? I will do my part if needed and Michail approves.
Nils
Finally found some time to fly 2.2 today.
Sadly it really rocks and I cannot go back Td 2.1.
So what is the difference between 2.1 and 2.2 MSP?
Is it really hard to apply hat change to Mobidrone? I will do my part if needed and Michail approves.
Nils
- Fri Mar 08, 2013 9:42 pm
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 128639
Re: mobiDrone nano arduino OSD for MultiWii with PID config
+1
vbat already is.
vbat already is.
- Thu Jan 10, 2013 6:12 am
- Forum: Shields, boards and sensors
- Topic: PilotLamp pointers?
- Replies: 28
- Views: 8623
Re: PilotLamp pointers?
threre are schematics for 2560.look for the alignment and measure.
I recently heard of boards with wrong pin description
good luck
I recently heard of boards with wrong pin description
good luck
- Wed Jan 09, 2013 10:22 pm
- Forum: Shields, boards and sensors
- Topic: PilotLamp pointers?
- Replies: 28
- Views: 8623
Re: PilotLamp pointers?
Is the routing correct?Try to check with a multimeter from input pin to mega chip pin
- Wed Jan 09, 2013 9:12 am
- Forum: Shields, boards and sensors
- Topic: PilotLamp pointers?
- Replies: 28
- Views: 8623
Re: PilotLamp pointers?
Hi.
Sorry. Not sure if it works.You should ask doughboy or copterrichie or eosbandi. They know a lot more about interrupts than me.
But you can always try. Code seems okay though.
Nils
Sorry. Not sure if it works.You should ask doughboy or copterrichie or eosbandi. They know a lot more about interrupts than me.
But you can always try. Code seems okay though.
Nils
- Wed Jan 09, 2013 7:07 am
- Forum: Shields, boards and sensors
- Topic: PilotLamp pointers?
- Replies: 28
- Views: 8623
Re: PilotLamp pointers?
you can remap the pin by yourself. there is a section for that in config.h. we can not move this pin and break everyone's config.
- Wed Jan 09, 2013 7:05 am
- Forum: Software development
- Topic: mobiDrone nano arduino OSD for MultiWii with PID config
- Replies: 295
- Views: 128639
Re: mobiDrone nano arduino OSD for MultiWii with PID config
I dont thinl one could expect the dev of the osd to adapt any little change from the mwc trunk asap. the trunk is changing so fast. I think you should give michal some time to adapt the changes after a dev release. You also can not expect it to be flawless. It is a de release agter all...
- Sat Dec 29, 2012 10:23 pm
- Forum: Software development
- Topic: Questions regarding 2.1 GPS
- Replies: 22
- Views: 5567
Re: Questions regarding 2.1 GPS
with post1293 or stock 2.1?`
I use the same setup mobidrone/ppm/sergps
I use the same setup mobidrone/ppm/sergps
- Sat Dec 29, 2012 10:14 pm
- Forum: Software development
- Topic: Questions regarding 2.1 GPS
- Replies: 22
- Views: 5567
Re: Questions regarding 2.1 GPS
Hmm,
I wonder when and how this has been fixed...
I remember, I read something about multiple serial ports at the same time :-/
Nils
I wonder when and how this has been fixed...
I remember, I read something about multiple serial ports at the same time :-/
Nils
- Sat Dec 29, 2012 5:38 pm
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 897203
Re: GPS integration
damn...
my condolences to family and friends...
my condolences to family and friends...
- Fri Dec 28, 2012 10:32 pm
- Forum: Software development
- Topic: Questions regarding 2.1 GPS
- Replies: 22
- Views: 5567
Re: Questions regarding 2.1 GPS
kewl. looking forward.
remember:I use stock 2.1. No dev etc..
remember:I use stock 2.1. No dev etc..