MultiWii

Hypermobile

Also check if your BT baudrate and multiwii baudrate are the same. Bluetooth modules from HK comes configured correctly to 115200 but ie from ebay they have baudrate set to 9600. I've written simple sketch to configure the bkuetooth connected to the MW. You have to upload the sketch to MW board, un...

Hypermobile

@hypermobile - which camera has the issues? Many reports of issues with all max based osds and >650 tvl . Especially sony effio, but its not all. I have no idea how to fix that. My guess is its not possible on osd. Hi Shikra, By accident i discovered the Problem... It turned out that...My Camera (w...

Hypermobile

@hypermobile - which camera has the issues? Many reports of issues with all max based osds and >650 tvl . Especially sony effio, but its not all. I have no idea how to fix that. My guess is its not possible on osd. It's an old camera so i don't know how many TV lines it has unfortunately ordered th...

Hypermobile

It turned out it just work along with PWM.

Just Override Vbat Pin A15. and you get Voltage.

There was no need to Drop 2 aux Channels in the Code

Easy does it

Hypermobile

To make it a bit more Weird....

my GoPro DOES overlay as should, in PAL & NTSC mode (OSD was in PAL).
No problem at all..

so Why does my FPV-camera Freezes the Overlay??

i don't get it :/

Hypermobile

Hi Shikra, Currently building up my new Carbon Folding Quad. MW 2.3 With Fpv Cam and MinimOSD and Your Firmware R1.1 All working well!!, But only when using only output of the OSD. (no Camera attached). So Black Background. When i Hook up my cam, On 'NTSC' No Overlay. So i guess my cam is 'PAL'. Cha...

Hypermobile

I Have witespy's Multiwii Pro V2.0. Running MW2.3 The one that misses all extra Analog inputs for Voltage & Powercomsumption. The point is I don't have A PPM Sum Receiver, so the Vbat Override pin A15 doesn't work. The code need some more changes. I was Trying to DIY change the Multiwii Code to ...

Hypermobile

http://witespyquad.gostorego.com/flight-controllers/gps-sd-data-logger.html

This one should work too??? for $10

Hypermobile

Was looking for it in the Log_1 ...

But the GPS.TXT CSV, had only got 2 lines of info.

Hypermobile

Anyone a Clue which ConverterProgram should be best to generate a GPX File, (or other format). GPS Babel perhaps? Can anyone provide me some CSV files made by the SD Logger?? I really like the Idea of Onboard Logging. I did some Logging with EZGui from Ezio....but it looks like my modified Bluetooth...

Hypermobile

Found a Old Log & and Old Video (with crappy Gimbal PID). (Working on a new Folding Carbon Quad; so nothing to test right away. But: Heading is missing so it Processes a "New Movement Heading" Should be fine for Planes http://youtu.be/95YqNlYtouw But for Altitude; and Distance to Home,...

Hypermobile

Sample video of mine : https://www.youtube.com/watch?v=gUUL88ZCylE&index=1&list=UUdckpm5sZoOPyRryfr8PnMg Has nothing to do with Multiwii or EZ Gui. But it shows the potention for Multiwii EZGui logfile Combined with video & e.g. Garmin Verb / Dashware thx for adding the *.GPX!

Hypermobile

@EZIO, i also use the GPS logging one and a While. Finally found Free software to Overlay GPS data onto Video (Garmin Verb). But if i use a Wingui File > and export it to *.GPX I get an error ..."no timestamps available". Is that something you can provide in the Logfile? Would be nice: Gar...

Hypermobile

@EZIO, i also use the GPS logging one and a While. Finally found Free software to Overlay GPS data onto Video (Garmin Verb). But if i use a Wingui File > and export it to *.GPX I get an error ..."no timestamps available". Is that something you can provide in the Logfile? Would be nice: Gar...

Hypermobile

I tried it on the NAV, and i likes it.

made a DIY (adjustable) 6-state switch.
Great stuff should be on the Next Release of regular Multiwii

Hypermobile

Looks Great, another great improvement on MultiWii

i'll give it a try on my new quad in a while

Hypermobile

I like the Idea!

However it did not work yet on my quad. i2c errors.

Is there something like Vbat Override neccesary to get it working?
How does the Multiwii knows wich pin should be listened to?

Hypermobile

@ Ezio, Have you ever thought about, ACC Trim in EZGui. I noticed on my Setup that my Roll & Pitch not always go over 1900. To allow to trim the ACC. I suggest a Menu Button > ACC trim > And then 4 Arrows Up Down Left Right to get the Trim Clicks (like the stick combination; Full throttle roll L...

Hypermobile

okay, maybe nice to make a option that the app to Fix a Orientation on startup??

i Fixed my Phone on the Tx...Always Landscape, (rotating is anoying)

Hypermobile

@Ezio Noticed a little bug. when the app is started in Portrait on my Phon e...And turn it into Landscape... There is NO Logging on/off Button and Powerbutton visible./ when i start the app in Landscape...those buttons are visible. Maybe you can check that Works nice most of the times It is not a b...

Hypermobile

@Ezio

Noticed a little bug.

when the app is started in Portrait on my Phone...And turn it into Landscape...
There is NO Logging on/off Button and Powerbutton visible./

when i start the app in Landscape...those buttons are visible.

Maybe you can check that

Works nice most of the times

Hypermobile

I've got the same Configuration.

It does compile after a small change (earlier this topic).
But i don't see any measurements...

Maybe if you use, Flight Logging....on EZ Gui or WinGUI..maybe you get some numbers back.

But there is no Follow Terrain function working or something like that.

Hypermobile

If you don't use Nav..Multiwii 2.3 has a official release.
Nav is still in beta. But the rest is pretty much the same as 2.3

Hypermobile

If your receiver support failsafe all Channels.

you can program you Failsafe in such way...that you can activate RTH...
no Multiwii code neccesary

Hypermobile

I don't want to be rude, but I cannot put countermeasures into the code against gross negligence..... If you reflash your controller NEVER assume that your EEPROM content is still valid, and most importantly NEVER assume that your mission is still valid. Before initiate mission ALWAYS read back you...

Hypermobile

I don't want to be rude, but I cannot put countermeasures into the code against gross negligence..... If you reflash your controller NEVER assume that your EEPROM content is still valid, and most importantly NEVER assume that your mission is still valid. Before initiate mission ALWAYS read back you...

Hypermobile

... Flipped the Mission switch, And the quad was drifting away, fast... faster....WHAAAAA!!! I quickly Flipped the Mission switch. And i was JUST be able to recover the Quad from crashing bad. ... After several missions successfully solved, I had the same problem with a dissappearing copter. The on...

Hypermobile

Hi I fly with his version since Christmas. In order to have good result you must: -fly in accro to tune your general PID -Fly in horizon or angle to adjust level pid and digital trim -when it's good, calibrate acc and mag -tune GPS HOLD (must be accurate without and with Wind) -tune baro (baro is n...

Hypermobile

I just did another GPS Hold Test....But Only Horizon and every off...is more stable then with the GPS Hold on... But i was hoovering above the ground....and Suddenly is flip 180 Degrees...and it was on the ground.. Instant Engine Failure (Hobbyking NTM series).... (not structrual damage this time......

Hypermobile

Bluetooth problem solved by Serial Speed in config.h Calibrated the quad. let it sit for a while to get Satelites Just tried a little mission. (mission was double checked by downloading from the quad). Flipped the Mission switch, And the quad was drifting away, fast... faster....WHAAAAA!!! I quickly...

Hypermobile

Thanks for the answer,

I didn't change it since it was preconfigured.
But now i know, i'll check and expect that that would be the answer.

Hypermobile

Got a Problem on the Pre B7. Laptop Bluetooth and Android Bluetooth give me trouble... No data or no connection at all. only the wired UBS connection worked Downgraded to 2.3. Everything Okay (same hardware & same EZGui & WinGui Pre 10). anyone a suggestion. Check serial port speed in confi...

Hypermobile

Got a Problem on the Pre B7.

Laptop Bluetooth and Android Bluetooth give me trouble...
No data or no connection at all.
only the wired UBS connection worked

Downgraded to 2.3.
Everything Okay (same hardware & same EZGui & WinGui Pre 10).

anyone a suggestion.

Hypermobile

Can't get EZGui connect anymore to my Quad. I did use is last year with no bug problems...so i know how it works. I now get connection, but i get a lot of "Not received" messages, (and the BT link is Red (not flashing)). Already Rebind the BT-device. And gave EZGui a reset Maybe the reason...

Hypermobile

Maybe possible to merge with https://code.google.com/p/multiwii/source/detail?r=1653.

witespy's Multiwii pro V2.0 hasn't got a A0 Pin header available.

Hypermobile

Blind and counting Arrow down :p
buti use Notepad++.

Hypermobile

o_lampe wrote:
shikra wrote:click on drop down arrow somewhere near top right side of IDE

I sure did that already, but it is not listed.

Maybe you're working on a small Netbook with a low resolution. it could be out of screen.

other option is to open the Config.h with another editor > notepad++ for example

Hypermobile

Just quick thought: AUX1 Low : manual (gyro/acc only PID) Mid : Attitude (software activates auto level and all sensors to do that) High : GPS (software avtivates GPS and all other sensors that are needed AUX2 Aux1Low Aux1Mid Aux1High Low Normal Normal Hold Mid Mag Acro Nav High AltHold AltHold RTH...

Hypermobile

Can't you program it as a "trigger", when "on-off" = "off-on" triggers the function MISSION, PH, RTH, ... whatever the previous function is, PILOT is still in control and not the "pre-programmed" logic. Keep it simple manu You mean a "and" Function ...

Hypermobile

I found a little bug. Today i added a Sonar SRF08, but on the Nav Code i get a compilation error. I don't get this error on the MW2.3. error message: Sensors.cpp: In function 'uint16_t i2c_readReg16(int8_t, int8_t)': Sensors.cpp:1664: error: cannot convert 'uint8_t (*)[2]' to 'uint8_t*' for argumen...

Hypermobile

I found a nasty bug in the baro code (it was recently updated in _shared and merged to the B5 code.) Under 20degree Celsius the baro will go haywire. I'll post a fix to the B5 code later tonight. Please note that it is also important to let your copter sit in the cold before you start flying. Since...

Hypermobile

I found a little bug. Today i added a Sonar SRF08, but on the Nav Code i get a compilation error. I don't get this error on the MW2.3. error message: Sensors.cpp: In function 'uint16_t i2c_readReg16(int8_t, int8_t)': Sensors.cpp:1664: error: cannot convert 'uint8_t (*)[2]' to 'uint8_t*' for argument...

Hypermobile

Double post....

Hypermobile

Hi There, Following the Multiwii Project for a while now.

getting into it

. I like it.

But why is the Nav code seperate from the MW2.3?
Shouldn't this Nav code be MW2.4 Beta?

keep up the good work.

Search found 94 matches