Search found 28 matches
- Tue Sep 13, 2011 4:22 pm
- Forum: Software development
- Topic: Win7 64Bit GUI Problem !
- Replies: 14
- Views: 8676
Re: Win7 64Bit GUI Problem !
Hi, If you start GUI x86 version then you need to install java 32 bit version on your 64 bit. If you start GUI x64 version then you need to install java 64 bit version on your 64 bit. that's all, Same on linux, as the java code have depends on some system library, you need those library for 64 or 32...
- Mon Sep 05, 2011 10:41 pm
- Forum: Ideas
- Topic: GPS integration
- Replies: 14
- Views: 5775
Re: GPS integration
Hi,
About improving cpu time, it should be a better idea to just read one char or some char from serial line by loop
So after some loop the GPS string will be complete and one more loop later we decode it.
By this way , there is some gain improving the loop() for RC and sensors
About improving cpu time, it should be a better idea to just read one char or some char from serial line by loop
So after some loop the GPS string will be complete and one more loop later we decode it.
By this way , there is some gain improving the loop() for RC and sensors
- Mon Sep 05, 2011 6:47 pm
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 888072
Re: GPS integration
@patrike You can use my previous post , it should work, i get data from my GPS, but it is hard to debug with this board. Don't forgot to comment the part about INT on PORTD in newsoftserial. I report this part in RX.pde to handle interrupt and forward it to NEwSoftSerial class. @alexinparis, if you ...
- Sun Sep 04, 2011 9:20 pm
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 888072
Re: GPS integration
Hi, i have done a gps integration on promini board, gps should go in place of LCD connector in my sample. I need someone to check my code, because i did not know if problem come from my GPS or from the code. My gps come from remzibi OSD, i ve no test board other than fcwii, so it is hard to check. T...
- Mon Aug 29, 2011 9:37 pm
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 888072
Re: GPS integration
Just for information if you did not use SERIAL_SUM_PPM receiver, you have to comment out in NewSoftSerial the PCINT2_vect, because it is already used in multiwii for standard receiver interrupt and there is no more free port on portD i want to use the other motor pin which are free for my tricopter ...
- Mon Aug 29, 2011 11:11 am
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 888072
Re: GPS integration
Hi,
The NewSoftSerial libray works with interrupt, buffer and allow highest communication baud, better than old softserial.
Check here http://arduiniana.org/libraries/NewSoftSerial/
Fabrice,
The NewSoftSerial libray works with interrupt, buffer and allow highest communication baud, better than old softserial.
Check here http://arduiniana.org/libraries/NewSoftSerial/
Fabrice,
- Mon Aug 29, 2011 12:36 am
- Forum: Software development
- Topic: GPS integration
- Replies: 1724
- Views: 888072
Re: GPS integration
Hi Alex, You are fast just started same thing, by porting ardupirate code. For PROMini somthing like that should be enougth to read serail at 4800 baud, don't take care about pin 3 and 4 i use a fcwii and need to check empty pin tomorow : #ifdef PROMINI #include "NewSoftSerial.h" // Here's...
- Tue Aug 09, 2011 3:49 pm
- Forum: Ideas
- Topic: New stable mode idea
- Replies: 5
- Views: 3206
Re: New stable mode idea
Ok i will do a reflash with real 1.8, not SVN i think i miss a comit 2 days ago
I want autolevel too, to try FPV with remzibi OSD, i look at remzibi dev for arducopter and discover that sending correct serial data can display attitude so why not
But it is another thing to do once evrything is ok
I want autolevel too, to try FPV with remzibi OSD, i look at remzibi dev for arducopter and discover that sending correct serial data can display attitude so why not
But it is another thing to do once evrything is ok
- Tue Aug 09, 2011 3:20 pm
- Forum: Ideas
- Topic: New stable mode idea
- Replies: 5
- Views: 3206
Re: New stable mode idea
@shikra : ok i will try it soon with PDF controller so. i don't like expo. Flying helicopter without it
My settings of PI was maybe too high so.
My settings of PI was maybe too high so.
- Tue Aug 09, 2011 12:24 pm
- Forum: Ideas
- Topic: New stable mode idea
- Replies: 5
- Views: 3206
New stable mode idea
Hi, I've a tricopter with WMP+NK, i like attitude in acro mode but don't like the stable mode. Can we implement a middle mode with features like follow : * Max angle inclinaison limit ( example 20°) * Ability to override max angle limit in case of emergency ( like ABS on cars) When you move stick mo...
- Fri Jul 29, 2011 12:33 am
- Forum: Software development
- Topic: MultiWii GPS support
- Replies: 42
- Views: 31675
Re: MultiWii GPS support
Ok so, i can continue to look at part of code from ardupirat, which took pid loop for lat / lon, and maybe heading can be read from gps too when copter is in move.
Code is there just need to extract part for NMEA serial, reading / pid loop
Code is there just need to extract part for NMEA serial, reading / pid loop
- Thu Jul 28, 2011 12:54 pm
- Forum: Software development
- Topic: MultiWii GPS support
- Replies: 42
- Views: 31675
Re: MultiWii GPS support
Hi,
Do you have the code or diff from svn ? I wan to do a try with my gps from remzibi osd )
Thanks
Do you have the code or diff from svn ? I wan to do a try with my gps from remzibi osd )
Thanks
- Thu Jul 21, 2011 11:06 am
- Forum: Software development
- Topic: Thoughts on max_correction
- Replies: 4
- Views: 2498
Re: Thoughts on max_correction
Hi, I just read your post and maybe i will try max_c to 350. My tricopter is a mini jakub frame. When i was flying with 1.7 after balancing propeller and also adding dampers to motor fix. It fly pretty well with low PID 1.3 - 0.030 - 15 After switching to dev version PID are 2.0 - 0.030 - 11 ( it fl...
- Tue Jul 19, 2011 12:57 pm
- Forum: Software development
- Topic: Very weak pitch gyro response on 714 dev
- Replies: 2
- Views: 1692
Re: Very weak pitch gyro response on 714 dev
Hi, In the past i got same issue because i did not read well the line , as you can see in dev version inside config.h #define GYRO_ORIENTATION(X, Y, Z) {gyroADC[ROLL] = Y; gyroADC[PITCH] = -X; gyroADC[YAW] = -Z;} It show how to reverse X and Y, i'm agree it is not a good sample, it show how to switc...
- Sun Jul 17, 2011 3:03 pm
- Forum: Software development
- Topic: PDF controller for level mode
- Replies: 20
- Views: 23246
Re: PDF controller for level mode
En lieu et place du code deja present, cette portion de code existe deja et elle commence comme pour l exemple par :
//**** PITCH & ROLL & YAW PID ****
et se termine aussi par :
lastGyro[axis] = gyroData[axis];
axisPID[axis] = PTerm + ITerm - DTerm;
}
//**** PITCH & ROLL & YAW PID ****
et se termine aussi par :
lastGyro[axis] = gyroData[axis];
axisPID[axis] = PTerm + ITerm - DTerm;
}
- Fri Jul 15, 2011 6:31 pm
- Forum: Software development
- Topic: Fast forward issue with (dev20110705)
- Replies: 21
- Views: 7153
Re: Fast forward issue with (dev20110705)
hi,
It is ok for me too, tricopter fly very well in accro mode. But in stable mode i have strange issue, when i switch to stable mode in fly i have radom direction to trim.
It last fly today i switched three time in stable mode to check where to trim and last attempt was fatal
It is ok for me too, tricopter fly very well in accro mode. But in stable mode i have strange issue, when i switch to stable mode in fly i have radom direction to trim.
It last fly today i switched three time in stable mode to check where to trim and last attempt was fatal
- Wed Jul 13, 2011 3:23 pm
- Forum: Software development
- Topic: Fast forward issue with (dev20110705)
- Replies: 21
- Views: 7153
Re: Fast forward issue with (dev20110705)
hi,
I think PeterPilot have same issue with a Quad.
I think PeterPilot have same issue with a Quad.
- Wed Jul 13, 2011 2:07 pm
- Forum: Software development
- Topic: Fast forward issue with (dev20110705)
- Replies: 21
- Views: 7153
Re: Fast forward issue with (dev20110705)
I noticed a change in SVN repository which seem to affect our issue. It looks like a correction In config.h /* this parameter defines the maximum correction per axis multiwii can output before mixing the output to different motors 42 this parameter becomes inactive as soon as the stick are far from ...
- Tue Jul 12, 2011 7:35 pm
- Forum: Software development
- Topic: Fast forward issue with (dev20110705)
- Replies: 21
- Views: 7153
Fast forward issue with (dev20110705)
Hi, Thanks again for previous help; which help me to fix the board freeze I have played with the 1.7 version, it works well. And now i tried version dev20110705. I ran into an issue with fast forward, when i want to stop, I reduce the pitch then the tricopter go backward a lot which cause instabilit...
- Sat Jul 09, 2011 1:04 pm
- Forum: General discussions
- Topic: MultiWii program seem to freeze
- Replies: 14
- Views: 5526
Re: MultiWii program seem to freeze
It fly very well, as i have made a minitri by using jakub frame, tri is very fast. but i need to tweak settings a little more i think, it is far from my trex family copter tail heading hold in curve. Anyway it is a very good project programming, i like the code, it is easy to understand. Do you have...
- Fri Jul 08, 2011 12:23 am
- Forum: General discussions
- Topic: MultiWii program seem to freeze
- Replies: 14
- Views: 5526
Re: MultiWii program seem to freeze
Ok the capacitor was a really bad idea
But like ziss_dm says and as Hamburger confirm. I took the power from one of the three ESC and connected it directly to servo power.
Now all looks good
Tomorrow i ll do more test outside.
Thanks again
Fabrice,
But like ziss_dm says and as Hamburger confirm. I took the power from one of the three ESC and connected it directly to servo power.
Now all looks good
Tomorrow i ll do more test outside.
Thanks again
Fabrice,
- Thu Jul 07, 2011 10:55 am
- Forum: General discussions
- Topic: MultiWii program seem to freeze
- Replies: 14
- Views: 5526
Re: MultiWii program seem to freeze
Ok i will try this evening, maybe adding a capacitor close to servo power pin too
- Thu Jul 07, 2011 10:32 am
- Forum: General discussions
- Topic: MultiWii program seem to freeze
- Replies: 14
- Views: 5526
Re: MultiWii program seem to freeze
Yes it still look strange.
Just moving quickly radio rudder can hang the atmega.
If it is a power issue, why atmega does not reset and restart normally ?
I will try to power servo with one of the three ESC only
Just moving quickly radio rudder can hang the atmega.
If it is a power issue, why atmega does not reset and restart normally ?
I will try to power servo with one of the three ESC only
- Thu Jul 07, 2011 12:51 am
- Forum: General discussions
- Topic: MultiWii program seem to freeze
- Replies: 14
- Views: 5526
Re: MultiWii program seem to freeze
Ok i think i found the problem. Doing lot of test with a different board, with a different atmega328p... With only one ESC without receiver but with servo. With all ESC, without receiver, without servo, and all is good ... So look like i have an issue with servo DS 928 BB. I have many of them, tried...
- Wed Jul 06, 2011 9:28 pm
- Forum: General discussions
- Topic: MultiWii program seem to freeze
- Replies: 14
- Views: 5526
Re: MultiWii program seem to freeze
I use all three ESC, for schematic, i m looking for. PCB is this one http://fcwiiki.fpv4ever.com/index.php/M ... e_la_carte
thanks for your help
thanks for your help
- Wed Jul 06, 2011 4:38 pm
- Forum: General discussions
- Topic: MultiWii program seem to freeze
- Replies: 14
- Views: 5526
Re: MultiWii program seem to freeze
Alerady checked ground, i use FCWii schematic which is equivalent to arduino dualminove something like that, 16mhz quartz.
Power is provided through ESC.
Power is provided through ESC.
- Wed Jul 06, 2011 3:20 pm
- Forum: General discussions
- Topic: MultiWii program seem to freeze
- Replies: 14
- Views: 5526
Re: MultiWii program seem to freeze
Hello, Thanks for your answer. It is not a clone it is a genuine version from Wii. I set an interleave delay to 3300 and also tried a bigger value at 5000. I see this function in action already, when motors are not armed, if i move tricopter, i can see the green led blinking for short time when serv...
- Wed Jul 06, 2011 1:08 pm
- Forum: General discussions
- Topic: MultiWii program seem to freeze
- Replies: 14
- Views: 5526
MultiWii program seem to freeze
Hello, I ran into a strange issue with multiwii program,sometimes it freeze very quickly and sometimes it freeze when flying. Program version is v1.7 . Why i say it is frozen ? Because motors kept their PWM input, and as it is a tricopter, servo has kept its last position Who is connected ? WMP + Nu...