MultiWii

Any1 is using mini32 with Harakiri? Planning to put it on a miniquad.

Hello, might need a bit of help here. Managed to load MW OSD onto the hobbyking's minim' osd and connected it to naze32 baseflight. Uploaded fonts in GUI. Once I power it up, I get the screen displaying the correct voltage, on min time and DISARMED status. When I arm the copter, the props spin up, b...

Cleanflight looks very promising, will be testing it out shortly. A few questions meanwhile. I have a stock minimosd which runs @ 57600, in Harakiri set tele_prot = 3 brings the live to it. Any chance to do something similar in Cleanflight? Is the Gps code will stay similar to Baseflight, or will be...

Hiho. @rank that is possible but I guess you will have to change the mixer.c on the other hand you could use (or more precise: abuse) the gimbal functions for that.... like with multiwii... Or buy a receiver that puts out sumsignal and separated pwm channels simultaneously - that is future proof be...

Hey harakiri lovers! How hard/easy it would be to map an aux channel to one of the unused receiver pins?! Need it for my retractable landing gear.

EDIT: Concerning cutting traces look at the bottom of this page: m http://dev.ardupilot.com/wp-content/uploads/sites/6/2013/06/apm2_mag_cut_2.jpg Been contemplating on putting an external mag for a while now, but every time I look at the mag chip on the rev5 board, I drop the idea. How is it possib...

e_lm_70 wrote:@rank :-> Is the Yaw servo making mess once in a while, in all flying mode or only in GPS position mode / MAG on mode ?
?

In all modes, every few seconds

Tried the Testcode 3, my tricopter seems to be nicely holding the gps position. The only problem I have, is the yaw servo spitting out some powerful jerks once in a while. This is with no mag activated. I tried very low pid settings for the yaw, but that didn't help. On baseflight, all silk smooth. ...

timecop wrote:Having designed the hardware and written 95% of the firmware (of the "new" code, not stuff transplanted from multwii), I think I'm qualified to determine what's user error and what's not.

Anyways, problem solved by using the power up sequence, first battery then usb.

[Goy ya mate, my fifth naze board and my last one. Good luck with your attitude. By all means, Phantom Vision V2+ is waiting for you. Thanks for the joke man, never gets old. I help people who are willing to be helped. This guy has a history of trying to troll me, so I'm not very inclined to help h...

What 'other fucking pins'? There has been no pinout changes between any revision since r0 of years ago. If you're running latest firmware on both boards then the issue is elsewhere. I'd check for bridges on 2 8pin components near the RC inputs - but then again, neither of those are close to RC3/4, ...

Certainly not a problem with the Ublox. Now i put the older board on my tri, and it works fine. + and - are from the spare motor out pins, rx and tx connected as per manual. If I disconnect the receiver from the problematic board, the gps starts working normally. Obviously, some hardware problem on ...

Timecop, I understand this is the easiest suggestion for you. But.. I just again connected my old boar wire by wire, exactly the same way, and gps is solid, nothing is jumping. Seems to be a hardware problem, if you ask me, I just thought you may suggest to try something. How about hooking the gps t...

as I said, same config works fine with my older naze. I have 2 ublox units and both recreate the problem on the newer board. Hooking is correct, gps is recognized and everything

Ok, narrowed down the problem to the physical conflict of the gps and ppm inputs. When either of them is unplugged everything gets normal. Here's a vide of how the channels are jumping. Please somebody help!

http://www.youtube.com/watch?v=kaZBYiNy ... e=youtu.be

Hi, just encountered a problem on my tricopter withthe new rev5 naze, as soon as I connect the Ublox 6M gps to naze (I have 2 different ones, and the problem is the same), all the channels start going wild, jumping up and down chaotically. Gps is recognized and seems to work though. I have set: feat...

For skilled people owning a hot air soldering gun (I have no skills, but I got my "hot gun" for 59$ shipped from china) ... remove the 5883 on board , and connect an external 5883 module (less then 2$ from eBay) .. it is quite simple. I did manage with my limited skills and my un-steady h...

I vote for external mag option, no idea why the developer is so stubborn, why to fight with the customers?!

My appologies for not reading through the thread. Just curious how the sonar is performing with the latest harakiri? Also, any cheap sonar you could recommend?!

Are you guys out of pink? Just received a brand new board and it's completely.... RED!!!! Any changes apart from the colour? P.S. Ok, things are not so well, this is the Acro board I've received instead of the full naze one. Is this the correct email to contact the guys: "info dog hikarisoft do...

I've previously posted here that I've fried the usb module on my rev5 while soldering. Later, I tried to use the FTDI to connect to the board which worked. But when I tried to update Baseflight to the latest version, it got stuck in the middle. After waiting for a couple of hours, I powered off the ...

As I said, I flashed it before soldering with the latest software, and it worked. After soldering, usb recognition failed. I was using a portable (lipo powered) soldering iron, not sure if that could cause any problems... So you reckon the board might still be alive, apart from the usb thingie?! I n...

Hey folks, might just burned my brand new naze rev5 somehow... Unpacked, flashed with the latest software using baseflight flash online option. Then carefully soldered all the connectors, no overheating, pretty clean job. Then tried connecting the board to my laptop, just to find "Usb device no...

23jan.hex is the first hex I got the gps functions to work to some extent. Gps hoover works just about fine, RTH was a little aggressive, so I shut it down. Will try once again later. What's the GPS AUTO function?!

Thanks, I'm on V5, actually have 2 of them. So really hope you won't give up on us. I'm sure V5 will dominate naze32 world shortly.

Is there anyone flying harakiri pre 2.6 with all the gps features working as they should? I mean without flyaways, abnormal behavior etc?!

Yep, used chrome gui and flashed the latest online version

so for the telemetry you have exactly the same connection? I measured with a voltmeter, the receiver's Rx/Gnd and Naze's Tx/Gnd are displaying some micro voltage. So the connection is not broken. As for the settings, I tried it a few times over. Everything goes fine till the moment I enable those. H...

Yeah, armed or unarmed, no telemetry data whatsoever. Anything else I could try?!

Also, I found this 2 particular settings, which hang my rev5.
feature MOTOR_STOP and
set tri_unarmed_servo = 0

Hi, I'm having a problem with getting TELEMETRY to work. Is there something wrong with my set up? Naze rev5 board,the battery pins on naza connected to the distribution board and the voltage is displayed properly within GUI Receiver Frsky D4r-II connected to naza 32 as per picture. in Cli: "FEA...

Hi guys, my first post and straight to the question. Trying to make the telemetry function to work, but with no success. Here's what I have done. Receiver Frsky D4r-II connected to naza 32 as per picture. The battery pin on naza connected to the distribution board and the voltage is displayed proper...