MultiWii

Michael van der hoek

Weird that the board is fried, didnt do anything other that usual, and when i replaced the fried naze with an acro one all work, so cant be a wiring prob.

Michael van der hoek

What can i have done wrong? Soldered 5+ nazes and never had any problems. Now i just updated my quad with an full naze rev5 and it isnt working! When connected to the pc theres a small black ?capacitor? that gets real hot! Naze isnt lighting up or anything. Its the black thing in the lower right, be...

Michael van der hoek

OH wait, how dumb of me, GPS uses RC input and Servo tilt uses output channel. So i only lose aux 3 and 4. haha, so stupid And i have to use PPM to get my aux 3 and 4 back right? But my receiver isnt PPM. can this be modded somehow? Its an Corona receiver 72Mhz Corona old FM synthesizer RX have a P...

Michael van der hoek

OH wait, how dumb of me, GPS uses RC input and Servo tilt uses output channel.
So i only lose aux 3 and 4.

haha, so stupid

And i have to use PPM to get my aux 3 and 4 back right? But my receiver isnt PPM. can this be modded somehow? Its an Corona receiver 72Mhz

Michael van der hoek

small question over here,

Can you use the feature Servo_Tilt and GPS at the same time when the receiver is PWM?
If so, how can i hook it up? I think im stuck because i miss 2 connections.

Michael van der hoek

Hey Bmallory, thanks for the code! But, the althold thing was already changed by TC a while ago. Even so, many many thanks. I dont know how to change the Original code, or, like i said in previouse post, what triggers what. So i dont know what to do with your textline.. I like to see an naze with al...

Michael van der hoek

Thanks for answering,

I guess i have to pass on editing the code. I dont even know where to start, what is what and what affects what.
Would be nice to use the naze as an flight stab. with rth capabilities.

EDIT: is there any way to learn how the code works? or is it just trail and error?

Michael van der hoek

works like a charm with an extra BEC!

Michael van der hoek

hey bmallory, Think i know whats up with your OSD, i have the KV osd as well and i had to use an axtra BEC to power the osd. If you connected all to the naze there isnt enough juice to power all servo's, naze and kv osd. So just seperate that! The motor channel is already answered bij TC. @TC, did y...

Michael van der hoek

Hey TC, small questions....Well the question is small but i dont know if the excecution is small also. I tried the baseflight u modded and yes, it doesnt use motor rpm anomore for altitude changes, neither does it use its elevator. Can that be changed? Also, i can now use 2 motors and 2 ailerons. Th...

Michael van der hoek

I ordered an bec and want to power my gps and minim osd with it

lets hope that'll work!

Michael van der hoek

Oke, so i rechecked all the wiring. Yanked everything out and tested it step by step. Outside the plane nothing wrong, could pull, twist or bend every wire, every connection. So, back to the plane. Connected everything again and test. Within a sec screen goes blank and osd is gone. Now, i figured th...

Michael van der hoek

Oh and its def. Not any wires, when i unhook the minim and connect cam straight to vtx its spotless video

Michael van der hoek

So, powered minimosd via esc rail. Same probl! Unhooked my gps to see if that would work. Noting...

Anyone ?? Im lost

Michael van der hoek

Yeah i should use pins from motor number 2, because i use a plane and nr6 is already used.

Gonna try that tonight, first work my ass of today at work.. Still 7 hours to go :O

Michael van der hoek

i'll try to pull 5v from my ecs header and connect ground of the osd directly to the lipo. Maybe that will help. Any other suggestions? maybe a flaw in my wiring? i'll try to describe my wiring route. Lipo--> powers esc, vtx and cam. Grounds are all connected to lipo. Esc--> powers naze 32 Naze 32--...

Michael van der hoek

just measured, 4,9 volts. even when i move the plane

Michael van der hoek

Hey Guys, I dont want to hijack the other topic about the minim osd so i created a new one. I got a small, slightly annoying problem with my minimosd. My setup: Bixler V1.1 with naze32 Ublox GPS Minim osd 3S 2200Mah lipo 6ch rx I hooked everything up like it should be, got my vtx in the tail and its...

Michael van der hoek

Yeah but what does boxnames do in the osd?

Michael van der hoek

Uhm, what is passthru if i may ask ?

Michael van der hoek

got my osd up and running, works great!

Only am still figuring out how to set up RSSI, anyone got a clear explaining step by step?
And whats that with "boxnames" ??

Michael van der hoek

BIG thanks TC, i'm gonna flash the board with that .hex!

Could take a while because my plane is under reconstruction for FPV gear and OSD.
When i have the first flight i will post how it went.

gr

Michael van der hoek

hey TC, happy new year! This was the reply in the 8-bit section. Can this be changed in baseflight for my airplane? Re: Airplane mode Postby PatrikE » Mon Dec 30, 2013 11:38 am Hi You can find this row in MultiWii.cpp in the 8-bit version. Code: Select all rcCommand[THROTTLE] = initialThrottleHold +...

Michael van der hoek

hmm, than i first have to find out how to change the code, will have a look at it in github.

any suggestions?

Michael van der hoek

hey guys, im using a naze32 with baseflight firmware in my bixler airplane. The altitude hold by baro is done with motor rpm, so if its going to high the motor rpm will drop and if its going to low the motor rpm will spool up. Is there any way to dont use the motor for hight control but use the elev...

Michael van der hoek

Hey Timecop, i dont really get your answer, advanced what?

Maybe ill have to try to make a custom mixer for my plane? Or is that not an option?

Michael van der hoek

quick question, i had my maiden flight yesterday with the bixxler and the naze for stab. everything works just fine, having horizon on flies heavenly. Baro is working also, but baro is also adjusting my motor rpm. If it is losing some hight it will throttle up and if its gaining some hight it will a...

Michael van der hoek

See the link in above reply, there u can see how to connect the rssi cable to the minimosd.

On your receiver is a different story, search google for your receiver and rssi

Michael van der hoek

that explains it all! thanks!

EDIT: Bought myself an minimosd and Ublox 6H GPS for my bixler

Michael van der hoek

That makes things a lot clearer for me! So all is possible but ill have to rig the naze with gps first. Hmm maybe ill have to put the minimOSD on my quad then To bad te page isnt findable, even on the developers page there isnt any thing about RSSI, but in their movie RSSI is there. Maybe ill order ...

Michael van der hoek

Can someone tell me some more about this OSD? I currently own a modded super simple osd for my quad but want a somewhat more intelligent osd for my bixler. The bixler is also updated with an rev5 naze board so the minimOSD looks as a true dream. But I cant figure out what the standard options are. I...

Michael van der hoek

Any idea when u got the time to take a look at the flaps TC? Still havent got the time and good weather to make her maiden flight with the rev5 board in it. So maybe i can wait the flapperons out and update the firmware first

Michael van der hoek

on my bixler i can only use flapperons, i've got no additional flaps on it.

So it would be great if there would be a flapperon mode where u can set an flap angle and the speed of the flapperons.
I think when it jumps to a certain pos. it would cause the plane to dive?

Michael van der hoek

i'll see when its flying time

Looks to me when u calibrate the mag and correct the mag decl. then it should be good. North is north, doesnt matter if you're hanging upside down or inside out.

Just calibrate it when the board is in the right pos.

Michael van der hoek

i mounted it upside down and backwards, did the set aligns and all looks fine.

Why do you think it cant be used for baro and horizon?

Michael van der hoek

no, upside down and reversed.

Michael van der hoek

So for mounting it upside down, calibrating the acc and mag isnt enough? In baseflight GUI the art. horizon is already how it should be while the board is upside down. I just have to set align board yaw 180 and roll 180, because is you set pitch at 180 its back to normal right? I mean, when u set ya...

Michael van der hoek

Hey timecop, tnx for answering. To bad flaps arent working yet. But ill have to fly without them then. Like i said, im not that handy with programming. In some other topic they were talking about: 'Define flapperons aux2' and that kind of stuff, but that is what you mean with looking in the airplane...

Michael van der hoek

I bought myself another naze32 for my bixler airplane. Love the naze board on my quad so i thought, why not on my bixler. So i fitted the board in the plane, pur baseflight on the board, set everything up as it should and then it was time for Flapperons. Not that u need them on a bixler but just for...

Search found 39 matches