MultiWii

I dunno, but to me it doesn't look like you're actually enabling level mode in any of the clips in the video. That, and your firmware is ancient. Why not update? My firmware is the latest available, the screenshot is from a friends' settings. He does uses another firmware version. I even tried to f...

I'm having an issue with the Naze32 on my Spider Hexa. See the video that demonstrates the issue: _Y-pt_COqDc Two issues: 1. In acro, when applying nothing but throttle, the hexa pitches forward. 2. In angle, when recovering out of a fast run, the hexa doesn't level correctly. These are the settings...

So I installed the Naze32 board that worked on my hexa, since I wanted to complete it and fly it I tried the other boards on my Mini-H and it also gave me ticks/hickups. I updated the one of the two boards that gave me issues to the latest firmware and tried it again and suddenly the issue seems to ...

After some more testing, I decided to get a working receiver-naze32 combo out of my Mini-H quad. I put it on the hex and everything works perfectly!!! This after I checked two naze32 I recently bought (May 2014) with the same receiver (and another one too!). The only thing that I can imagine that is...

I'm using Futaba Fasst 2.4 the regular way, no. ppm or sbus.

I am using the Naze32 on a blackout pdb but that shouldn't give any interference I think?

I just checked with the receiver from my Mini-H quad, and get the same results... The receiver I used first, came out of another Mini-H quad I've been flying around with for some time without problems.

Do you mind telling me what forumtopic that was? Any help is welcome!

Auto-level is on, but this also occurs in manual mode... I thought the peaks were coming from vibrations on the board, but I tested without the motors powered. Z0vAPHrVfgc So this is just giving a bit of throttle and moving the hexa around, without the motors being powered (so not turning). I was th...

I just finished my build and I'm experiencing some strange ticks/hickups on my motors. Check the motor output of the Naze32: hRoRrqWXuTU I've changed all ESC's already, same result. If I test the motors with the faders in Baseflight, I get smooth curves, no problem there. Once I arm and control with...

Thank you for checking that.
Seems that I will need another receiver then...

Can anyone help me with the failsafe on the Naze32? This is what I get: vTpLsVueASU - I've set feature failsafe - I've set failsafe_delay to 10 (1 second) - I've set failsafe_throttle to 1300 (to have a clear visual on testing the failsafe) - I've set failsafe_off_delay to 50 (5 seconds) The engines...

This is what happens when I turn my transmitter off (signal goes to 900, well below the treshold of 985, set up in the CLI)



So the failsafe starts, but doesn't go to the failsafe signal, which I set at 1300.

failsafe delay set to 10 (1 second)
failsafe off delay set to 50 (5 seconds)

First of all, thanks for this great tool! I would like to ask if the Failsafe function is functional and tested? The receiver I use only lets me set failsafe for the throttle channel, so I really like to use the failsafe function of the board. I've set 'feature failsafe' and saved. But when I turn o...

I already mounted it in the normal position...

I couldn't wait a month to install it

First post on this forum
I've just ordered a NanoWii to replace a CC3D board on my Hoverthings Flip FPV frame.

Can I mount it upside down? My current FC is mounted upside down to get a clean layout on my frame.
If yes, what do I have to change in the settings?

Thanks in advance!