MultiWii

Coming from the KK2.0 v1.6++ with SL-mix mode (similar to horizon mode), I have about 30 packs on my acro naze32 and still cant get it to fly the way I want it to. I have got my flip/roll rate right where I want it (2+ per second). Here is my current two issues (I fly horizon mode). The transition ...

OK Mr TP,

Flashing to latest FW did the trick,

Thanks

timecop wrote:no, did you bother upgrading firmware to latest?

the FW on the board is a couple of weeks old max, do I need to flash it again? , and if I do, will it erase my settings?

timecop wrote:no, did you bother upgrading firmware to latest?

the FW on the board is a couple of weeks old, do I need to flash it again? , and if I do, will it erase my settings?

I'm not able to do "motor test" on baseflight, it seems to freeze there, sliders move but nothing happens, ( battery is plugged) I have to click on disconnect in order to come out of BF. Tried on a Windows 7 64bit machine, and a 32 bit one, same issue on both, could this be a bug?

yep, done the activation, now I need to learn about the values, there is an option in "initial set up" tab to do with motor speed under fail safe (by the look of it)
Don't you wish there was a comprehensive manual for Baseflight?.... I do

scrat wrote:Then you can't use this feature if your rx doesn't support failsafe.

I understood this feature is RX independent, is done on the board, am I wrong?

Anyone knows how to configure the Fail Safe feature once activated through the CLI?

I'm using some receivers without Fail Safe and would be great to get FS set up on the board.

Thanks.

Hi guys,

I'd like to know how to calibrate all the esc's at the same time via the controller, is there a CLI command on Baseflight?

Thanks.

yep, flying like a champ now..

I was indeed doing something wrong, I forgot to set up the mode switch, so I was on Acro the whole time!

timecop wrote:Running latest firmware? Level had a bug until like last year May... Otherwise you're doing somethin wrong.

I flash to latest FW on arrival with Baseflight, I'll go through all settings and see, I mean.. it flies well.. but no snapping back to level as I would like. Thanks.

timecop wrote:You probably changed pitch/roll P not level P.

Yeah, I prob did..

Maxed out at 25.5 P Level improved a bit but still not quite there, could it be vibration related?

scrat wrote:Set higher P gain for LEVEL.

Already did, but didn't seem to achieve this, just fast oscillations.

Trying to make a small 210mm quad snap to level with more "forcefulness", tuning seems good and flies well, but feels rather loose still on Angle, is not snapping to level as well as in other bigger frames. Ideas?

Enjoying this FC very much, see video below, thank you.

http://youtu.be/gtBOSpcga3o

The naze 32 rocks!

This controller is the best I've flown so far, good job TC

Hi, sorry for this very late reply, That problem was solved, however on the above board, and a HK 328p I'm having trouble with the throttle, in flight it goes up and down on its own, any ideas? The Nanowii is now on 2.3, and the 328p has the original 2.1 both do the same, is not radio related, I've ...

I'm new to MW so please bear with me

The pitch is always showing on the GUI at 60 deg upwards, roll seems fine,
-ACC calibration does not correct this, maybe I need to do something else in Config.h ?

Running MW 2.2

Thanks