MultiWii

Hello,
did anyone reflashing into fast pwm Redox 20A esc?
I saw info that i can flash it by skywalker 20a hex but i dont know which one

ok i will thanks waltr

No mode is active ob aux

After i changed my redox esc 20A into fast pwm everythig looked perfect much faster response and great engine work but i noticed after first fly try that if there is 1500 and 1500 on my pitch and roll value quadro is stable itself but if i change pitch into some other value 1700 and back into 1500 q...

Thanks waltr, I'll try to flash bootloader by my USBasp and post resoults.

look at this photo: http://majek.mamy.to/wp-content/uploads/2012/09/hk-multiwii.jpg there are 6 pins on the left next to usb conntcion. there is direct connction between those 6 pins and miso mosi sck pins so i think i can use it to connect my usbasp right? Should i remove quartz 16 mhz for first us...

ok i have Usbasp but how to connect it to the board instead of preogrammer onboard. I can solder miso mosi etc directly to pins but if there is other option i dont want damage pins .

After I asked question above i found that flashing arduino bootloader is required but... i dont know how to do it and i really can't find working solution. Any tutoria or advise maybe?

I repaced Atmega 328p in my hk multiwii 328p and now i can't program it. I'm sure all pins are soldered well. I need to change some setting of my arduino soft because i'ts brand new atmega 328p? any solution's tutorial?

Hello, i can't figure it out why my multiwii 2.3 gui app show complitely wrong values of ALT. Ewerything else works but hexacopter cant stabilize because of ALT sensor readings. Any ideas? I reinstall soft many times but nothing helps. http://www.multiwii.com/forum/download/file.php?id=2495&mode...

i hadnt crashed my quadro. only one thing that i forgot to write... one of the connectors ESC <-> battery disconnected when rc turn off and before i disconnected battery. I thnik it may fied one of the sensors. After connect i can change software and use Gui, i can also callibrate mag and acc and se...

i hadnt crashed my quadro. only one thing that i forgot to write... one of the connectors ESC <-> battery disconnected when rc turn off and before i disconnected battery. I thnik it may fied one of the sensors. After connect i can change software and use Gui, i can also callibrate mag and acc and se...

i have this multiwii 328p controller m everything worked great and my quadro was stable. Today when i connect board and turn engines on my rc radio last connection because of low battery level. I charged battery and turn on everything again. But since lost connection with rc quadrocopter isn't stabl...

Hello, i've using multiwii few days and everything works perfect in my quadrocopter but.... today when i tried to start motors, one of them (connected to D11 ) didnt respond. I thought it may be my ESC or Motor problem but i changed conections with another Motor pin and surprice... another motor con...