MultiWii

QAV400

. Edit: Found the info i needed

QAV400

yeah thats how i have it now, but i was wanting to save some space and clutter on my frame and go to just sat's only, but wont bother if i cant run 2

QAV400

Does anyone on here know if its posible to get 2 spektrum sats to connect together and then connect as one sat to the naze (in serial RX mode)
to have some diversity with more antena's etc
this may not be the best thread, so feel free to re-direct if needed

QAV400

QAV400

Yes please more examples, the WIKI was vague on the subject

QAV400

So then I think I should set 11deg 8min positive too 1108 in cli . anyone with knowledge on this wish to comment to help me out?

QAV400

all good thats what i used, the second part of my post there was nothing to do with mag declination.

Cheers

QAV400

Ok scrat so the 8 at the end doesnt even come into it, a bit strange. When im on the Multiwii EZ GUI android app and look at the map which goes to google earth it shows my quads current position correctly on the world map but has a Pos hold position "marked" in Africa which i can not seem ...

QAV400

@Scrat:
Ok thanks,
just out of curiosity what would 1degree 18minutes convert to?
not also 118 ?

@ e_lm_70
Would'nt a mag issue in POS Hold just make the quad spin in one spot? and not fly away in one direction?

QAV400

Thank you Scrat, So only Return to Home function in baseflight is working at the moment is that what you mean? (not Pos Hold) If this is the case then it makes sense why when i enabled Position Hold that my quad started to fly away lol.... Aslo Ive been reading heaps on setting the mag declination w...

QAV400

To Anyone that knows other than TC (GPS related) Can anyone tell me is the way to set a home point or do position hold etc is it all the same as multiwii's online info? Basicly is that where i should be reading for detailed info on using gps functions, I have the gps all on and working with satts lo...

QAV400

Im trying to solve a issue with maybe a naze board or a esc or motor etc.(friends quad, not mine) my question is, lets say one esc on a quad has a fault and was not spinning up the motor fully (as in it will idle rpm but not throttle up, and is ittermittent also) in the GUI tho that motor output (M4...

QAV400

thank you, much appreciated

QAV400

Im currently running the full naze with mag and baro etc , got it new from you about 2 weeks ago its a white rev5. Im currently running the Bt module from the 3.3v rail no probs. want to add gps now also, I might order a 3.3v ubec to be safe i think. I can see 2 x iL344 small chips on the board one ...

QAV400

Some help please 3.3v pad is limitted to 100ma , and I cant seem to find out my Bt modules current draw, I was wondering if anyone knew if you can run a 3.3V BT Module and a NEO-6M Ublox gps both off the 3.3v pad of naze board ok or not? data sheet for gps says max curent 67ma but typical is around ...

QAV400

well some time ago (not to long) TC said that most BT modules will work, so.... From my understanding a ttl signal can be anything up to the vcc voltage of the transmitting device so it could be 3.0v or 5.0v etc So should we only be running bt modules that can use a 3v VCC and use 3v pad to power it...

QAV400

I use a bt module as well, pluged it in the usb, powered the 5 v and had no issues. Serial has to flavours (probably more) 5v (normal pc) signal and 3v (ttl ) signal. 5v on the data lines would kill the 3v naze. Since it worked before we can assume you had a 3v ttl module. Since the Naze died i wou...

QAV400

Im happy enough to land to do pid changes just thought id check, thanks for letting me know. TC are there any BT modules you would recommend that don't cause the naze to blow if usb connected at the same time? or do can they all do it Also so i can try to avoid blowing mine as i think i would cry, I...

QAV400

Does anyone know if reading pids and or changing them while hovering will work? or will make multi rotor go out of control?
I am connected to quad by android app and bluetooth

QAV400

Thanks TC,

Does anyone know if you can now use a spektrum satellite rx and gps at the same time with the recent firmware updates by hydra?

QAV400

Thanks but with the double sided tape does it mount levelish? is there enough flat area on the bottom of the rev5 boards to stick to or do you just cover the entire board with double side tape?
Ive got the rev5 coming from you ems , but dont have it right now to look at it .

QAV400

Hey guys is there any known Rev5 board cases available anywhere? or would it be hard to dremmel a rev4 case? not caring about looks i just want to mount it level and my quad doesnt have any mounting holes for FC and i dont really want to drill

QAV400

awesome! thanks

QAV400

Can one limit the angle modes max angle? To help with flying with a gimbal etc

QAV400

Got it now , thanks guys

Also if i use the baseflight chrome app to do the flash of firmware for me , Will I loose my current features that are on or off or PID's or min thottle if different from default etc etc

QAV400

Question, When Im on the github baseflight firmware main page and I click on the "Downlaod Zip" button in the bottom right of the page am I getting the very latest baseflight.hex? Or do I have to get it another way for the absolute latest updates to baseflight.hex If so I can not figure ou...

QAV400

Edited out

QAV400

Got it working now, thanks TC you da man

QAV400

Ok thanks I will do this, but will the latest baseflight work with any of the currently available Android app's to tune PID's?

QAV400

QAV400

Ok thanks mate, Any on ebay that you recomend? I tried searching for FTTI USB to TTL but no luck
i dont even no what FTTI Means... google is not helping with it either for me.

QAV400

Awesome, thanks TC hopefully i can fix it then

QAV400

thanks guys,
this is the one i currently have
http://www.ebay.com.au/itm/121141213048 ... 1439.l2649

QAV400

Hi guys,
Can anyone give my a link to a Bluetooth module that will work and not put the naze32 into Bootloader mode on startup.
The one I have now is doing that and its heaps annoying to say the least.

Cheers

QAV400

Can anyone tell me is this what i need to be able to connect to my naze32 rev4 board and tune it by android phone
http://www.ebay.com.au/itm/261147430820 ... 1423.l2649
Also is there any where like a guide or something on how to wire it in or set it up etc?
Regards

QAV400

Well a couple of times with my naze32 rev4 board the Baseflight chrome App has been working fine then the app updates it self and then I have issues with either jargon on the cli page or pages not loading or comm ports not even there at all to connect to and when i have updated the firmware on the b...

QAV400

everyone that i know usually runs the latest version compiled/published on github, the easiest way to get it is to enrer firmware flasher and load online firmware from there As my Quad is worth a bit to me I will just use multiwiiconf.exe from now on as I dont want to really risk running always the...

QAV400

I just removed the App and re instlled it in chrome, now its working , but when clicking on the tabs between reciever , Pids etc it freezes up and you have to click on them and back again heaps etc to get the tab to show up. Is there a newer baseflight firmware that is proven tested and solid workin...

QAV400

Since the update to the Application a couple of days ago I can not get it to see the board/Commports at all. Was working perfect before that tho. Also it all works if i use Multiwiiconf.exe So I assume something is up with the latest update and my specific hardware. Im on a Rev4 acro naze32 on basef...

QAV400

Is there a dangerously low "P" value that one should not go under? or I or D etc... As a few weeks ago i was messing with pids with some pretty radical settings and it hovered ok but when I throttled up hard it went bezerk and lost all control crashing badly so im just trying to avoid thi...

QAV400

Is there a dangerously low "P" value that one should not go under? or I or D etc... As a few weeks ago i was messing with pids with some pretty radical settings and it hovered ok but when I throttled up hard it went bezerk and lost all control crashing badly so im just trying to avoid this...

QAV400

Thanks , you the man....

QAV400

Latest Chrome On the rev4 Board was Baseflight firmware - baseflight-20130719.zip Once the Chrome Baseflight applictaion updated it self (it told me it updated) then after that had all the issues. I have now updated to the newer firmware on the board and it all seems fine now Was wondering tho if i ...

QAV400

I am using a minimOSD with my naze32 and i have been having a few issues the last few days. If i enter the CLI using the chrome app when my minimOSD is hooked up and everything is powered by a lipo i get a load of gibberish along these lines; m Also the radio bars on the chrome app update REALLY sl...

QAV400

If there is a more appropriate thread for this ? then pls direct me to it I could not find any way of contacting who ever makes the Baseflight App Does anyone know if you can roll back the Chrome app Baseflight, as it just updated itself (not sure how to turn this off) now it wont read my pids all t...

QAV400

Have tried searching heaps about acc lpf factor and looptime with not to much success , was hoping some one might be able to tell me what raising or lowering them will do to flying characteristics.
I would love to know what im doing rather than just copying some one else's settings etc....

cheers

QAV400

Edit : Problem Solved

QAV400

The vibration issue is gone (I fixed it) , vids confirm they are gone

Also im talking about what a setting does in gui, like looking at the picture changing in GUI of throttle curve (has nothing to do with vibration of a frame or not)

QAV400

Does anyone know if "throttle mid" in baseflight chrome app GUI does anything at all even when throttle expo is at 0.0 , As according to the graph it seems to do nothing. I am wondering as Im trying to improve my quads hovering to not go up and down so much. Am i just adjusting it for no r...

QAV400

Does anyone know if "throttle mid" in baseflight chrome app GUI does anything at all when throttle expo is at 0.0 , As according to the graph of throttle curve that you look at it seems to do nothing. only seems to change the curve if some expo is added in. I am wondering as Im trying to i...

Search found 75 matches