MultiWii

@animal 60.

Have you tried servo flag 4? That should work. Experiment with the pins though. I don't have this exact board so I am not sure about your outputs.
In a flip 32 board enabling servo tilt and servo flag 4, the servos should be plugged in pins 7 and 8 (soft serial 2)

I use this converter, lots of graphical ways to output your data

http://www.gpsvisualizer.com/

I d like to build a smaller version. Would I have to change anything In order to use smaller nema motors? I mean besides re tuning pids.

P.s. Thanks Mahowik. Really nice project.

Really old thread, but since it's the first result if you google (Vbat in multiwii) in case someone searches for it, the mistake teslahed did was to switch the resistors. The smaller one,(47kΩ if you are using a 68kΩ/47kΩ pair or the 33kΩ if you are using the 51kΩ/33kΩ pair) is supposed to be connec...

Thank you Dave, no worries, I won't take up any more space in this thread for such a board-specific question. I'll start reading and if any more problems come up, I ll post in the thread in rcg.

Thanks a lot for the help, it seems I will not avoid extra fine soldering work.

Vassilis

Hi Pluschi, what do you mean not wired correctly? I had read about some earlier problems, I think the signal and voltage cables were swapped, but that must not be the case, since the receivers bind and work fine. can you link me to where I can read more? Any way to find how to utilize soft serials? ...

Hi, I have a full naze32 clone, the flip32+. Some of my channel pins are no more working due to repeated soldering and desoldering. To be more specific pins not working are channel pins 1-4. I have a dsmx and a dsm2 sat receiver. How can I use one of these for receiver? Pin 4 is not working so I can...

Thanks again Rene for your time and effort.

Vassilis

Thanks Rene, I did try to change the code but I still do not know programming. I ll try a few things again just to experiment but realistically I ll have to wait for your sketch. Thanks again.


P.S. Hello e_lm_70. I hope you are fine.

Hi Renes, thanks a lot for your contribution. I ll try to implement it to a small quad I have.

Is it possible to record gps data too?



Edit: I am trying to add these I found in the logger sketch.
MSP_RAW_GPS
MSP_COMP_GPS




Vassilis

+1 for auto-tuning +1 for better fixed wing integration. I think these features would make it much more approachable to rc world. Here http://www.rcgroups.com/forums/showthread.php?t=1922423 is an implementation of autotuning in a thread in rcgroups. Maybe it could be ported or to Multiwii. Thanks o...

Thank you Julian,

Very nice feature.

You probably have different version of Multiwii.You have MW2.3 while Brandon refers to 2.2 probably.

I can understand that. My thought was something like a separate pid tuning page with all caution signs and stuff., like the copter control menu that already exists. Still, it would be useful just for the first pid tuning of a copter, not for later on.
Thanks again for working on this app.

Hi, here are some thoughts that I think would make it better in pid configuration. I d like an option to auto write the changes in pid settings instantly as the user changes the values. This way it would be easier to tune the pids, as the effects would be observed faster. It would make tuning pids a...

Ezio, i d like to buy the unlocker too, but Play store does not accept payment with Amex for non usd denominated purchases.

Hi, I just wanted to post that there sellers online that sell motor drivers, specifically for this purpose See http://www.pial.net/store/ . Hobbyking has multiwii boards with integrated brushed moror drivers, needs a dsm2 compatible transmitter. See http://www.hobbyking.com/hobbyking/store/__42255__...