MultiWii

Should it be tx to tx rx to rx, or tx to rx and rx to tx?

after more than two dozen attempts to get these font correctly working I have officially given up. I have tried several different firmware always clearing the eeprom and using a good ftdi adapter. Tried several good font files and still nothing. Good news is voltage is working and the timer works. N...

Pads soldered. Everything seems to work fine however just the font is off :/

Ok, got the voltage working. Yay.

Now the font is messed up once hooked up to the fc.
uploaded several times and still no luck.

The boot screen is fine.

Any ideas?

Tried the switch on left and right, both video voltage and main voltage. And both just show 0.0 :/

If applying 12v on the video in/out pins would this cause a conflict? I've seen it wired both with and without and still working.

I have selected the witespy board in config.h

Tried using bat2 and still not working :/

Been searching for a few days and cannot get the voltage in for monitoring to work.
Have flashed different firmwares and have a working osd, except i get no voltage reading.
I have the battery plugged in to bat1 and have also tried bat2.
Is there something im simply missing?

Thanks

On my way home from work, will switch it to use bat2, however if I'm feeding bat1, wouldn't I see voltage for video?

Perhaps I missed it but I did search.

Using Pauls modded board, I have a 3s battery plugged into the bat and ground pins but I cannot get the voltage to show any reading.

Is there something i missed?

Used the gui to turn off mw voltage reading.

I'd love to know if anyone has tried this mix and what pids there running. I've has a tough time with this frame.

Has anyone successfully tried this auto tune? Im having difficulty tuning a new build, and would love to try this.

I have 2.3 nav on my fc and i am also using wingui2.3pre4 and i am unable to mark waypoints on the map. Any ideas?

Thank you

Figured it out, have to hold the Shift key while clicking.

Have you fixed this? I'm having the same issue on one I just made.