MultiWii

kaysee

I don't know how I can missed that when I did the research. It's all there!
Thank you very much PatrikE. Can't wait to give it a try.

kaysee

thanx man.

btw I solved my problem by trial n error

kaysee

Hi guys. I don't know if this thread still active or not, but want to try my luck. I'm a hardcore mini multirotor fpv'er and recently trying to get back in flying fixed wing and successfully had a couple of fpv flight with a flying wing. Being a enthusiast in trying something new I would like to giv...

kaysee

Thanx carlonb. I am fine without it. I did thought that might solve it. Going to try it on my next session.

kaysee

@Olddude I agreed. It's still works fine. But maybe KV wants to look into it. @KV@TC Seems like the max altitude n distance still didn't show. KVTeam-Osd 2.3 with some layout change since last video. Attachment:- My settings in the GUI. Hardware:- AcroNaze32 Rev5 Orange with Afro32 CLI version 2.2 J...

kaysee

Hahaha... i know i know. Done upgrading to new release right after my reply. As u once said, 'if it flies, dont fuck wit it'. So i didnt as it serve me well

kaysee

timecop wrote:april 14??????????????????????????????????????????????????????????????????????????????????????????

Lol... my bad. Baseflight Apr 30 2014.

kaysee

@Kaysee OK, I see that you are using NAZE32... I removed the BOXNAMES from the code, that´s probably why... some functions will not be available until a new NAZE code review We are only using BOXIDS on the HUD also. Sorry for the inconvenient -KV latest firmware build I uploaded does "same&quo...

kaysee

Sorry for the late reply. Thanx KV. That at the end, they called it mini hex buttsex LOL! As for the bugs I didnt noticed that myself, as I'm only interested in the max speed clocked. I'm using it with AcroNaze32 rev5 with the latest release frm Jun (i think ). But as far as i concern this is good e...

kaysee

Hi folks. Just want to express my thanx to KVTeam for making this great OSD.

I've used it on my RD230 Mini H-Quad from fpv-reccon and all the function n informations that I needed works great for me so far.

kaysee

Hi guys. I have this one acronaze32 which only have the blue led lights up when powered. It worked until i flashed it with latest firmware while forgetting to unplug the lipo from my quad. The flashing process started just fine, then i remember the lipo as the motors making some beeping sound and d...

kaysee

Hi guys. I have this one acronaze32 which only have the blue led lights up when powered. It worked until i flashed it with latest firmware while forgetting to unplug the lipo from my quad. The flashing process started just fine, then i remember the lipo as the motors making some beeping sound and di...

kaysee

Ouch! Thanx man.

kaysee

Hi TC. Need help. I'm just starting to enjoy my acronaze32 on my new diy mini h-quad when i had a mishap this morning with a tree. Afterward, the buzzer starts to beep every second, leds - blue is on, green and red alternately switching on n off. What might be wrong here? I tried to re flash the fir...

kaysee

@scrat

I just had the same experience last night. I am happy to see my quad in altitude hold and gps hold for the first time. But got the toilet bowl as well.

kaysee

I had a bad crash this morning due to a prop came loose while i am doing a flip. As the result some of the pads for rc channels is gone. I am using a cppm setup and attaching my gps to the board. I can workout the GND, +5V, Ch1 and Ch3 pad. My problem is with Ch4 pad. I don't know where should I ta...

kaysee

I had a bad crash this morning due to a prop came loose while i am doing a flip. As the result some of the pads for rc channels is gone. I am using a cppm setup and attaching my gps to the board. I can workout the GND, +5V, Ch1 and Ch3 pad. My problem is with Ch4 pad. I don't know where should I tap...

kaysee

Is it possible to get gps and osd working at the same time? I can get the gps working no problem. I can get the minimosd working no problem. I can't get them to work together. If the gps is working, the minimosd just hangs on start up. Is there a serial port issue? Tried both 20131126 and latest fi...

kaysee

Kaysee- Were you ever able to resolve your MAG issue? I'm getting the same thing- with mag on, it slowly yaws to the right. Now its working just fine for me. First, the my problem was with my ESCs were not calibrated. My quad tends to slowly yaws to the right in acro mode. Calibrated. Solve that. I...

kaysee

@subaru4wd
thanx. will give it a try.

kaysee

Which android software works with harakiri? I tried to use Naze32 Conf but it crashed when connection made. I have this - http://www.banggood.com/MWC-Multiwii-Bl ... 86049.html for bluetooth connection.

kaysee

Thanx cGiesen. I thought my first post didnt pass through as my browser reporting timeout. deleted. Sorry for that. Much appreciated.

kaysee

Flashed my Naze32 with SG2.6 today. Looks promising this far. But one thing i have notice, there is no buzzer sound when the board initialize. Is this normal? Checked my buzzer with a 5v source and its working just fine.

kaysee

Thanx TC. I conclude that I can't use my osd connected to the board with the TELEMETRY feature enable. On second thought, what am I thinking to have them both for Now I am trying to get my second quad with a Naze32 to work properly. I have done the acc calibration as per my Acronaze32 and did the ma...

kaysee

timecop wrote:Correct, it reads it out of CPPM.
Its definitely possible to read it from a free pin when in PPM mode, feel free to submit a patch to do so.

Question number 3 seems to be answered already

I'm wondering the same thing as Rortega. As just an end user, I'll just wait for the patch

kaysee

Hi guys. I am back again with my telemetry questions I just got myself a Frsky D4R-II: - flashed it with the new 27ms firmware- - set the jumper for cppm - plugged it in to my acronaze32 with the tx/rx connected to Telemetry - Switched on the PPM and TELEMETRY features in CLI - Acronaze32 baseflight...

kaysee

timecop wrote:servo stuff is 2.3 feature.

Hi TC. Only now i have the time to look @ MWC2.3 for the servo tab that you told me last time.

My problem is, its not there (attached screen shot). I have enable the servo_tilt feature in cli. Is there anything that i missed?

kaysee

Will check it out later. Thanx again.

kaysee

After search done. I end up using this -> ServoMiscConf (viewtopic.php?f=8&t=3498) <- to reverse my gimbal.

kaysee

Thanx tc. But I can't find the 'servo' tab in my multiwiiconf GUI. In fact there is no tabs inside the window. I am currently using v2.2.

kaysee

thanx ABL. it works. but how i change the direction. my gimbal roll seems to b reverse.

kaysee

With r429, all the parameters are there. But gimbal_flags = 2 has no effect. No tiltmix. It is same as gimbal_flags = 1.

kaysee

I am really sorry. If i just look further ... found out i left the camstab setting off.

But still for r461 the gimbal parameters is missing. I'm back to my previous baseflight r429. Now trying to figure out how to set it up.

kaysee

I just finished flashing my acronaze32 rev5 with r461 then tried to get my SSG gimbal working using Servo_Tilt feature and set gimbal_flags = 2. Connected the gimbal as per manual. The gimbal did initialize but after that nothing happens when i move my quad. Did i missed something? I did notice othe...

kaysee

thanx tc. that was a quick reply.

kaysee

Hi guys. I need some clarification regarding 'gimbal_flags'. The default gimbal_flags=1 will set one servo each to control tilt and roll if what i understand from the manual is right. How about gimbal_flags=2 (tiltmix gimbal)? It still uses 2 servo for controlling tilt and roll right? Is it going to...

kaysee

First of all i have to apologize for my ignorance. As a total noob, once i saw the telemetry port on the board and from what i've read (halfway) that it uses the vbat as reference for voltage telemetry, im assuming that its only works as a voltage sensor. I've totally forgot about the digital port o...

kaysee

Thanx for the reply TC. I've done enable feature vbat and telemetry and i did armed the board. When you said it is not A1/A2 voltages make me suspect i have misunderstood something here. I shouldnt connected the telemetry port from the board to my D6FR A2 port right? Can i even use my D6FR to get th...

kaysee

I just got my quad flying with my new AcroNaze32 Rev5 on baseflight r429 with default PID and it is awesome. Thanx again Timecop. But i still can't figure out the telemetry. Search all over this thread and nothing helps so far.

kaysee

Thanx Andy for your reply. Somebody in my local forum just inform me after i made my post here about the telemetry data only been sent after the board is armed. I did try that then and what i found out, there is some changes with the voltage displayed on my tx screen for A2. But still its too small ...

kaysee

Hi guys. Total noob on MultiWii frm Malaysia and I just got my AcroNaze32 Rev5 frm LastAlpha. I want to thanx Timecop for making this available for others to play with and of course for the continuous support. I just successfully updated the firmware to r429 which solve my first problem with the boa...

MultiWii

Search found 41 matches

Re: Airplane RTH BaseFlight

Re: Airplane RTH BaseFlight

Flying Wing

Re: KV Team Multiwii OSD

Re: KV Team Multiwii OSD

Re: KV Team Multiwii OSD

Re: KV Team Multiwii OSD

Re: KV Team Multiwii OSD

Re: Sv: Naze32 hardware discussion thread

Help!?

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Harakiri aka multiwii port to stm32

Re: Harakiri aka multiwii port to stm32

Re: Harakiri aka multiwii port to stm32

Re: Harakiri aka multiwii port to stm32

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread

Re: Naze32 hardware discussion thread