MultiWii

Hi,
It works fine now,

I put 3s supply (instead of 2s used before) and used my old windows xp computer 32bit
I loaded last 1.4 release with arduino 1.6.4
Used win32 GUI
loaded font (took quite long time to download font)
and saved in PAL video format

now it works fine.

Thanks for your help.

I confirm it looks it is still minimosd original font.

I flashed with ftdi the code directly with the 6 pins in line then took GUI and upload font, I saw many characters on screen during upload but al end it is still same pb.

Do I need to flash with ISP the DP7456 ?

Thanks,

Thanks Arakon for your answer,

I open GUI and click upload font, wait for 256 charaters upload....restart MWI OSD and it is the same on screen.

Do you have an idea ?
Thanks,

Hi,

I flashed my new minim osd with MW OSD 1.3 SP2, I works but charracters seems to be corrupted.

I tried eeprom clear and old rush-osd but it is same.

Do you have any idea to solve this ?
Thanks

Just magic, i didn't know the function, it works fine with my tricopter and small quad dc motor. Maybe we could just move the function just under the esc calib because it is next step and indicate how to use it ? "eeprom clear, flash with config defined then use GUI calib acc and balance each p...

Hi all and happy new year I made my 1st tricopter 2 weeks ago with cf2822 and 3 esc ubec 20A from HK. I had lots of vibrations and found it difficult to balance props on motor each motor as i didn't know which level i had to reach. Today I flashed all esc with simonk and used calibrating mode from e...

Answer to my previous post : integrate SPI com with A7105 m multiwii flysky code has been already done. maybe it would be nice if it was possible to choose it directly in 2.3 in config.h #define FLYSKYRC //Flysky compatible integrated Rx with A7105,mpu6050,brushed motors,atmega 328(promini)

Hello, Nice place to make a wish for Christmas. I am quite new on multiwii and I'd like to try it first on a small V929 like to be familiar with PID....so to make it easier 2 improvements would be very helpfull : 1/ integrate in code output.ino the possibility to have PWM output straight to a FET (c...

Many thanks to Plüschi who already did the work I wanted to do and posted it before but my question is still the same I don't understand how WGM and CS are setup on promini.
I post his work here again.

Hello, I'd like to use my multiwii board on a small quad v959 directly without ESC. I think best way would be to change multiwii code to provide pwm directly to a transistor linked to brushed motor. I found PWM sequence for ESC generated here : #if defined(PROMINI) #if (NUMBER_MOTOR > 0) TCCR1A |= _...

Hello, Interesting topic, I ordered a multiwii board 2.5 to build a mid size tricopter, now I have only a v959 to learn how to fly. I was just wondering if it was possible to put a multiwii on a V959 or similar. I fly it with flysky module. I found a module on HK that can be used and is built in tra...