MultiWii

Bit of a deep end to jump off into I suppose, but I enjoy figuring stuff out as I go along.

Thats what keeps most of us here going, Me included.
Doing things on the run, so to say.

keep up the good work, and keep us informed.

If you look at the pic, the bottom frames are no longer there, No gyro mount,rx mount. Had only room under the canopy behind the battery, next to the swashplate. The tail rotates in reverse, as I dont need so much tail authority racing, Ive since then put my M/W fbl on the side burner, still interes...

MCPX has 135 blades, small for a multi wii, maybe integrate a mpu6050 on the 3in1 between the servos and the 3in1.
+ with 4 volts, I dont know how long you could fly. I had a hard time installing in this 450.

Mike, The elevator servo, is the one that tilts the heli forward or backwards, I had to learn this as a heli noob in "83" Now, the mixing channels do this stuff for us. Nick is the rear servo, but the two front servos move with it, in the opposite direction, if ya move the heli front to ba...

Hi guys I was thinking about using a my Multiwii Crius AIOP Board in my nitro heli. But can I still use my hh gyro. If so how do I hook it up, as it's on rudder channel 4 and the single wire on channel 5 (Switchable between rate mode and Heading hold, and what is a "NICK SERVO" Mike.. Hi ...

I know this sounds stupid, but how do I shut acro mode off? Is it in the gui? or do I have to program it out,
2,3 dosnt do anything when I load it after changing to heli 120, When I load 2,1, it works ok.

Hi RCman, Use V2.3 Public Adjust direction and throws In config.h /* Servo mixing for heli 120 {Coll,Nick,Roll} */ #define SERVO_NICK { +10, -10, 0 } #define SERVO_LEFT { +10, +5, +10 } #define SERVO_RIGHT { +10, +5, -10 } /Patrik I think I know why its not working right, as I tilt my gyro, it just...

Hi yall, Ohhh do I need some help, lol I put together a multiwii heli using a minipro and a 6050, just got the collective pitch working, but on the other cyc. movements, I get movement on all 3 servos and left cyc. moves faster than right. Where can I set this up, what part of the multiwii do I look...

Happy NewYear to ya all. The 6050 dosnt like the cold, I had my Heli 450 flying Super, tail gyro went crazy in the cold, changed it out to a Quark tail gyro, held like it was nailed to the sky, Than my heli went like I gave it a lot of left cyc. but i didnt, I hit right ,and it kind of straightened ...

Hey, Could somebody give me a parts list for this project? I would love to get started, I just need the stabilizing and leveling part of it, if possible. no motor, or tail. Both will be from tx controlled. Thanks Ok, I need the nanowii board, I know that, and the servos, I read that the nanowii is s...

Hamburger wrote:This is MultiWii right?
I have not heard of the program you mention.

Yes, it is multiwii, I got it from Patrik, for 90, 130 swashes, ive been looking at this project for a while.
Frank

Me again,
Thanks Ham,
Do I use the Aero_Heli wii motion plus setup program?
Or is there a better one out there.

Is it possible to use a regular gyro for the tail on these boards? I have a Quark, and would like to keep it if I could.

I have mounted a 5x5cm board (which was kinda standard size) on the tail boom block together with an 8lines display so it can be tuned and monitored without computer interaction. If you want smaller then get a nanowii or mini crius?? Board. The Thanks man, I just have to get all the parts, or a par...

WOW , I have to take my hat off to you guys, This is big time stuff your all working on. I myself fly a Flymentor on a fb heli, I got it setup real good, I can do light 3d with it, but only slowly, the gyro in it don't like fast moves. I was at a buddy's house today, and he has a 450pro fbl with a h...