MultiWii

helo

version 2.4 MultiWii with Crius A.I.O.P v2
frame quad
config by default

yaw not nervous joystick right background.
yaw left no problem, respond well.
yaw P 6,1 : I 0,040 : D 0

how to solve this problem.??

HELLO

my GPS HOME was with AUX2.
why not in the code a failsafe activates AUX2.
replace the command #define FAILSAFE_THROTTLE (MINTHROTTLE +200)
Please help make the.
look for the variable the code that activates AUX2
a good idea

Bravo Ezio
I love the new color the menu

version nav b7 it does not work well for me,
GPS HOME in castatrophe mode ANGLE or HORIZON.
so I went to the normal version 2.3.

sorry
with MultiWii version 2.3, the GPS HOME work better.

hi

During LAND I let gas what position? center or zero?

ok now it is easier for me.
thank you

hi

I understand for the return home, just turn MAG, réal or false ?

please
give more detail in RCcontrol Setting WinGuy.
I check (GPS HOME) - BARO - MAG ?
I check (LAND)-BARO-MAG ?

hi all

Can you tell me, for LAND and RTH works well, should I turn on MAG and BARO together ?, or just baro ?
Please give me an example RC control Settings
I can not find a tutorial how to use.

Hamburger wrote:No problem here with servo reverse in tri nor in helicopter on any of my models.

What you like rc ?

I tested with Megapirateng and no problem with the tail servo tricopter

hi all I believe that the reverse servo for tricopter work, causing a problem. For version Multiwii 2.3. Stick left servo fluid rocking right. Stick right servo gives a jolt violent right to go by following in then meaning left. If other people have the same behavior tell me. Maybe I'll put the serv...

I believe that the reverse servo for tricopter work, causing a problem. For version Multiwii 2.3. Stick left servo fluid rocking right. Stick right servo gives a jolt violent right to go by following in then meaning left. If other people have the same behavior tell me. Maybe I'll put the servo on th...

My tricopter board rctimer AIOP v2 fly better when I start-up facing north.
but when I start-up the south, poshold = no good and return hone = no good
even with 8 satellite
Version MultiWii dev r1648
ok well calibrated compass

Ok Ezio, but I do not knowif better in daylight,must see, must test
It is the fault to screens who are treated and too tinted.

hi How do you, to use the application in broad daylight, I see nothing I use tablet and phone, and I see nothing, run must seek shade. Just good to use when the weather is gray. same for other applications. Must invent screens to see the day. May make an application in black and white Sorry but I'll...

disquiet. version MultiWii_dev_2014_01_14__r1648 fly with bluetooth and make a RTH problem.. crash twice. collapse in the herbs. I tested one thing. I disable it in config.h //# define USE_MSP_WP. and def.h in the section (CRIUS_AIO_PRO_V1) //# define MPU6050_I2C_AUX_MASTER //MAG connected to the I2...

OK I move my post
thank you
sorry

then no one can help me?
I'm not fool me!
it is a MultiWii forum here.

HI

Multiwii 2.3--crius AIOP pro v2.
I am a RTH and why my tricopter happening behind me to return to the base.
Looking towards the end of this video 4:00/4:36.
http://www.youtube.com/watch?v=d9z6UgCA ... hZsF8eY-Cg

My settings are:

Poshold P 0,13—I 0,00
Posholdrate P 2,4---I 0,14—D 0,053
Nav rate P 2,5---I 0,33—D 0,080

ok I use the nav version b7 my board mega 2560 (crius AIOP v2). But not set ALT I give you an overview I lived with this config. I took off, I stabilize the tricopter,I active ALT,and it rides like a crazy 3 to 4 meters, then back down almost to the ground. spend 4 battery has to make adjustments, a...

Please.Alexinparis May not be the right place to ask this question. why not do the RTH as Naza ? up 15 m, back to the base, and landing. you can answer me in French, if you want. Ce n'est pas dans l'esprit d'origine du projet : "un tricopter pour faire des acrobaties" et pour cela , il fa...

the nav-b7 release is worse behavior. tried with CRIUS AIOP pro v2. I prefer the b5. But I leave with the MultiWii_2_3_r1648, is more stable, and baro works well. I give you my settings, can help other people. PID ROLL and PITCH (3,4--0,045--23) ALT (2,2--0,025--39) PosHold (0,15--0,00) PosHoldRate ...

Ok Patrike,
I'll test.

ptfff..
I think I'll go back to my old FW CRIUS SE
with a version Multiwii 1.9
watch this video, without baro without MAG.
Already two years.

https://www.youtube.com/watch?v=sJCqWRKeCQo

thank you for taking you time to answer me Ok I just installed MultiWi2_3-navi-b5-baro_fix. acro setting ok, adjustment level/ Angle ok. For ALT, I get my values ​​before MultiWii 2.3, (P 2,2---I 0,025---D 40). but with 2.3 nav-b5-fix does not work well with these values. I check on LAND, position s...

I'm sorry for my English, to translate with I do not want to waypoint, just do with the radio. I EZ-GUI, but at the flying site open days, can not see anything on the phone screen, Must run to put the shade and again. same thing with computer portable, we do not see anything. I tried waypoint nav EO...

Please.Alexinparis

May not be the right place to ask this question.
why not do the RTH as Naza ? up 15 m, back to the base, and landing.
you can answer me in French, if you want.

I also same problem.
but it is a little better with my settings on my radio position E.POINT RUD 120% / 107%
It is true that when accelerates without lifting Yan tilts a little worm right.

trying to do with # define MAG_DECLINATION 0.0f
now works better my Yaw

Hi

Problem with version MultiWii 2.3 mode tri on CRIUS AIOP pro v2.
When you deal with the yaw shaft is too brutal.
I tried everything in the pid and nothing to do.
I return to the MultiWii 2.2 version and any fluid.
Have you an idea ?

Hi
I have a twin engines electric , model superhero, no rudder, just wing elevon mixer.
I'd like to do with differential engine to turn right or left.
just use the gas, and the differential yaw
I have a CRIUS SE.
it is posible?
Code exists?

ok cool it works well.
I actually had not seen the igh menu in the GUI.
I saw also MAG 0.4 if I change this value that happening?

hello gentlemen

I tested the first version pre 2.3.avec Crius se
the yaw servo for tricopter to reverse does not work.
// # define YAW_DIRECTION 1
# define YAW_DIRECTION -1
it always goes in the same direction