Search found 21 matches

by aamorin
Wed Aug 28, 2013 12:50 pm
Forum: Frames
Topic: TBS discovery - custom motor MIX
Replies: 35
Views: 25869

Re: TBS discovery - custom motor MIX

Ok, I flew it last weekend, but I'm afraid I can't tell you exactly how good it fly.. All I can say until now is that it does fly.. Maybe it's because I have to raise a lot my pid's but it seems to be pretty tail heavy.. doing a fast forward flight (flying only with gyro) it starts to "fall fro...
by aamorin
Wed Aug 07, 2013 6:53 pm
Forum: Frames
Topic: TBS discovery - custom motor MIX
Replies: 35
Views: 25869

Re: TBS discovery - custom motor MIX

My.private.mixing has a howto description in the official wiki. The link may even be written in config.h. Read it it should answer your question how to use this. Idea is to not edit def.h ever. Define quadx or whatever suits your number motors and servos(ignore geometry aspects) - if none of the ex...
by aamorin
Wed Aug 07, 2013 12:33 pm
Forum: Frames
Topic: TBS discovery - custom motor MIX
Replies: 35
Views: 25869

Re: TBS discovery - custom motor MIX

Hi everybody ! First of all, thanks a lot for all of you testing/supporting and helping us all with this great software! I have a TBS Discovery frame since a few days ago, tested it with default settings (Quadx defined, default PID's) and it flew pretty well but I've noticed some strange behavior a...
by aamorin
Wed Aug 07, 2013 12:26 pm
Forum: Frames
Topic: TBS discovery - custom motor MIX
Replies: 35
Views: 25869

Re: TBS discovery - custom motor MIX

Hi everybody ! First of all, thanks a lot for all of you testing/supporting and helping us all with this great software! I have a TBS Discovery frame since a few days ago, tested it with default settings (Quadx defined, default PID's) and it flew pretty well but I've noticed some strange behavior at...
by aamorin
Wed Apr 25, 2012 12:40 pm
Forum: Pictures & Videos
Topic: Maiden Flight for a New Hexa
Replies: 2
Views: 1630

Re: Maiden Flight for a New Hexa

I don't know the answer to your question, but I can tell you that I also have to use high PID values with my heavy hexa (2.8kg.. I guess that's why), around P=12 I started to get a feedback, with less than that it was like trying to stabilize a sheet on the wind..
by aamorin
Thu Apr 05, 2012 4:04 pm
Forum: Ideas
Topic: 0.96" SSD1306 128X64 OLED Display Module
Replies: 207
Views: 236021

Re: 0.96" SSD1306 128X64 OLED Display Module

Wow, thanks a lot for all that clear information howardhb
I've only one more question...where to connect it to the Flyduino Mega ? (v2.1) as is i2c and not serial I don't know where to connect it, since it only has one i2c conector and is been used by the sensors..

Cheers,
aamorin
by aamorin
Tue Apr 03, 2012 8:17 pm
Forum: Ideas
Topic: 0.96" SSD1306 128X64 OLED Display Module
Replies: 207
Views: 236021

Re: 0.96" SSD1306 128X64 OLED Display Module

Hi everyone ! This is great! I was looking for some Multiwii LCD implementation to leave it on my hexa and this is the perfect solution! I have a two questions about it, as I don't have a deep knowledge of multiwii, what do I have to do to enable/use it ? I mean, where should I connect it to (Flydui...
by aamorin
Wed Mar 21, 2012 1:48 pm
Forum: Software development
Topic: MultiWii 2.0 is coming
Replies: 256
Views: 107002

Re: MultiWii 2.0 is coming

[...] for Serial GPS device: gps should be configured by yourself to ouput NMEA frames home is memorired as soon as possible when the power is on, the status led should blink accordingly once a fix is ok. RTH o PH is activated via a checkbox and in level mode only. Let me try to understand.. this m...
by aamorin
Wed Jan 25, 2012 5:44 pm
Forum: General discussions
Topic: Wii-bar - MultiWii as Flybarless controller for CP helis?
Replies: 22
Views: 9258

Re: Wii-bar - MultiWii as Flybarless controller for CP helis

There's another thread about this where some more work has ben made. http://www.multiwii.com/forum/viewtopic.php?f=7&t=611 It's possible to merge it with the aeroplane thread since its only a few #defines and the servomixer in output the thats different. http://www.multiwii.com/forum/viewtopic....
by aamorin
Wed Jan 25, 2012 1:22 pm
Forum: General discussions
Topic: Wii-bar - MultiWii as Flybarless controller for CP helis?
Replies: 22
Views: 9258

Re: Wii-bar - MultiWii as Flybarless controller for CP helis

Hi! What happened with this idea?? Perhaps there is already some very cheap flybarless controllers out there (~45 on HK) I think this is a great idea to be made; I'll love to help, perhaps I don't know pretty much about programming but I'm an IT guy, there might be something I can do.. Perhaps Alex ...
by aamorin
Tue Jul 12, 2011 12:05 pm
Forum: Connecting elements
Topic: [SOLVED] Paris V3 with WMP + LLC + BMA180
Replies: 18
Views: 8793

Re: [SOLVED] Paris V3 with WMP + LLC + BMA180

Stillee wrote:Slap me...
So dumb I'am !

It works ! :)

Thanks a lot my friend


Excellent!!
Don't blame yourself, I made the same mistake! remember: we are always learning!
Enjoy it!

Cheers.
by aamorin
Tue Jul 12, 2011 4:03 am
Forum: Connecting elements
Topic: [SOLVED] Paris V3 with WMP + LLC + BMA180
Replies: 18
Views: 8793

Re: [SOLVED] Paris V3 with WMP + LLC + BMA180

Hello, I have the same configuration WM+ BMA180 & Baro + LLC... Everything work on my multiwiiconfig but not the WM+ (Gyro) In software i Define... /* I2C gyroscope */ ITG3200 /* I2C accelerometer */ BMA180 #define INTERNAL_I2C_PULLUPS Software : I soldered the pad for the 3V I have connected m...
by aamorin
Thu Jun 09, 2011 12:44 pm
Forum: Connecting elements
Topic: [SOLVED] Paris V3 with WMP + LLC + BMA180
Replies: 18
Views: 8793

Re: Paris V3 with WMP + LLC + BMA180

It worked !! ... don't really know which was the problem, it seamed to be my fault (obviously..) I just soldered again a cable from the WMP+, enabled pull ups by software (and hardware) as I said before, connected an esc (just to give 5v to the llc) and.. voila! it worked.. now I just have to wait u...
by aamorin
Wed Jun 08, 2011 7:27 pm
Forum: Connecting elements
Topic: BMA180 without a board
Replies: 6
Views: 3872

Re: BMA180 without a board

Ceros007 wrote:Do I have to uncomment something in the code to use a BMA180, Pullups?


I also use the BMA180 and as far as I know you have to uncomment the #define BMA180 line; but just to be sure (I've like..24 hs in this :)) let other ones to confirm this.

Cheers.
by aamorin
Wed Jun 08, 2011 7:04 pm
Forum: Connecting elements
Topic: [SOLVED] Paris V3 with WMP + LLC + BMA180
Replies: 18
Views: 8793

Re: Paris V3 with WMP + LLC + BMA180

I have big news! (at least for me ) I've enabled the software pull ups (leaving enabled the external too, soldered pads) and now I've input from acc!! (bma180) But.. as not everything could be working from the very first try.. I can't see input from the WMP+ .. I have it soldered just like in the wi...
by aamorin
Wed Jun 08, 2011 1:15 pm
Forum: Connecting elements
Topic: [SOLVED] Paris V3 with WMP + LLC + BMA180
Replies: 18
Views: 8793

Re: Paris V3 with WMP + LLC + BMA180

PatrikE wrote:Try to enable internal i2c pullups.



PatrikE, just to be completely sure.. besides enabling the internal, should I let the external (hardware, soldered pad's) pull ups enabled ? or they can't be both enabled ?
by aamorin
Wed Jun 08, 2011 1:05 pm
Forum: Connecting elements
Topic: [SOLVED] Paris V3 with WMP + LLC + BMA180
Replies: 18
Views: 8793

Re: Paris V3 with WMP + LLC + BMA180

PatrikE wrote:I just plug in the wire i find first... :roll:
It works every time.. :ugeek:


Excellent.. just like I do! ;)

Cheers!
by aamorin
Wed Jun 08, 2011 12:45 pm
Forum: Connecting elements
Topic: [SOLVED] Paris V3 with WMP + LLC + BMA180
Replies: 18
Views: 8793

Re: Paris V3 with WMP + LLC + BMA180

And if you have sensors who run on 3v3 The board might need external power to it. Yes, I thought about that too and have connected one ESC. There is a "correct" sequence to connect this power sources or any is correct ? (I mean if I should connect, for example, first the FTDI to pc usb, a...
by aamorin
Wed Jun 08, 2011 12:33 pm
Forum: Connecting elements
Topic: [SOLVED] Paris V3 with WMP + LLC + BMA180
Replies: 18
Views: 8793

Re: Paris V3 with WMP + LLC + BMA180

Ok, I'll try it in a couple of hours!!

Thanks PatrikE
by aamorin
Wed Jun 08, 2011 12:27 pm
Forum: Connecting elements
Topic: [SOLVED] Paris V3 with WMP + LLC + BMA180
Replies: 18
Views: 8793

Re: Paris V3 with WMP + LLC + BMA180

Couldn't resist the wait.. I've connected de FTDI to win 7 (didn't use drivers, win recognized it and installed by his own) , then to the pro mini, changed this settings: #define MINTHROTTLE 1180 for plush #define QUADX #define BMA180 It all goes well, said "Done uploading", then opened th...
by aamorin
Tue Jun 07, 2011 8:56 pm
Forum: Connecting elements
Topic: [SOLVED] Paris V3 with WMP + LLC + BMA180
Replies: 18
Views: 8793

[SOLVED] Paris V3 with WMP + LLC + BMA180

Hi everybody! Perhaps this question might have been already answered on another place, but couldn't find it so here I go.. I've bought and already soldered the naked Paris v3 with the WMP, LLC and BMA180, but now I'm asking myself about the famous pull ups.. do I need to enable them in software AND ...