MultiWii

Hey guys,

a friend of mine wants to join this forum, but said he couldnt find registration link.
I logged off and couldnt find one either.
What are we missing?

Cheers
Benedikt

Hey Patrik,

thanks so much for your reply!
Im trying this for days, and with your suggestion I have gotten further than before!
Not perfect yet, but certainly on the right way now.

It actually does fly though.
Only about half a millimeter - its a hovercraft

Cheers
Benedikt

Hey guys, I want to use a brushed quad FC (AlienWii Classic) running MultiWii 2.4 to control the 4 motors directly. RC channel 0 should countrol motor 0 etc. I tried this in output.cpp: #elif defined( QUADX ) motor[0] = rcCommand[ROLL]; motor[1] = rcCommand[THROTTLE]; motor[2] = rcCommand[YAW]; moto...

This is probably the cheapest and most crashable MultiWii quad you can build.
https://vimeo.com/98008401

You could stuff him with a Micro MWC to bring him OT
https://vimeo.com/92576496

hey guys, Im trying to rig up a slanted micro FPV quad. It has the motor mounts tilted forward in a 25˚ angle, so that it is flying forward when the frame is level, and the camera is pointing straight ahead. To be able to hover, I calibrate the board angled backwards, so that the props are level. My...

sorry, the 228 comes from me cheating the system..
This is MW 2.3, I just changed the version info to pass your version check.
It is a customized version for the HK Pocket Quad, I got from here: http://www.rcgroups.com/forums/member.php?u=302980

thanks for looking into this!
I attached a screenshot of my settings, and the config.h (renamed to .zip because the forum doesnt accept .h or .txt)

and here is the output of pid():

Configuration of my quads via scripts? Sounds great! Im trying to connect to a HobbyKing Pocket Quad running MultiWii 2.3. Im getting this: WARNING: unsupported version of MultiWii detected So I checked the MultiWiiCL source code (thanks for being open source!) and found the version check: if versio...

thanks for the comment, I wasnt specific enough, but burning the bootloader was done multiple times, but it didnt change a thing.
If I cant fix this, the board is a loss. So any far-fetched idea, I will try it..

Im trying to run MW2.2 on a Hobbyking Pocket Quad (ATMega32u4). I have it running and installed on several other of these boards, so I basically know how it works. But for this particular board, something went wrong: after flashing several different firmware versions, I could not change any PID valu...