MultiWii

KeesvR

Hi Patrik, it's working perfect now, I'm very happy with it.
The only thing I like to see is the setting of the scale in the motors tab, this is not possible now.

Thank you very much.

KeesvR

I don't see these whit my tri copter.

KeesvR

Hi Patrik, I'm testing with this, but I can't find the toggle buttons to arm and disarm the motors I want.
I can only arm and disarm all the motors.

KeesvR

I have a Flytron Navigator V1 GPS. I'm trying to get my GPS working with binary protocol, but it's not working. I've flashed the gps with 1.9 firmware. With Minigps set it to 115200 and 10hrz also tried 5hrz. With NMEA protocol it's working fine, but with Binary protocol I see nothing in the GUI. Wh...

KeesvR

There is a vibration test version based on V1.8, a very old version and not working with the latest sensors.

http://www.rcgroups.com/forums/showpost ... ount=16725

My question is there somebody around who can make this work with V2.2.

Thanks in advance.

KeesvR

Very nice

KeesvR

Very good idea

KeesvR

There is somebody who's flying with a modified joystick.
viewtopic.php?f=9&t=510

KeesvR

Thanks, I hope there's gonna be a better solution for this in the future.

KeesvR

Copy the rxtxSerial.dll file from MultWiiConf_2.1 to version 2.0.

But why should you use 2.0 ?

KeesvR

This is strange, this is what I use with ER9X with FrSky mode 2:

#define SERIAL_SUM_PPM THROTTLE,PITCH,ROLL,YAW,AUX1,AUX2,AUX3,AUX4 //For 9X KeesvR

KeesvR

I thought the Vbat wasn't working, but this wasn't it. I let the Vbat values as they are in Config.H, but the alarm came to late, I checked on my Oled display and the settings where much lower then in Config.H. I also saw the failsafe value was different as I set it, I always set it at 1250, but on ...

KeesvR

In alarms line 188

if (f.ARMED && f.ACC_MODE) useResource('G',1000,1000);

Should be

if (f.ARMED && f.ANGLE_MODE) useResource('G',1000,1000);

KeesvR

Thank you very much, it's working now.

Next problem I need to solve is, my voltage reading is dropping when I give some throttle.
But not from my external lipo alarm. Maybe a short somewhere or a bad connection.

KeesvR

I like to test it but can't get r1171 working.

KeesvR

My first thought was to use the 9X with the stock software, but after 15 minutes of struggling with the menu I decided to flash with ER. As said before once done you never look back. With ER9X almost everything is possible. I saw a speaking 9X, very interesting. http://www.multiwii.com/forum/viewtop...

KeesvR

Thanks Nils, I'm gonna try it.

KeesvR

Is it possible to place a complete zipped version, its easier for me.

KeesvR

Oke, you've got it.

http://www.ebay.com/itm/ws/eBayISAPI.dl ... 1054020131
I got this one in 10 days.

The code from 2 hours ago, is it working anyway?

I just came here to look for some improvements on this.

KeesvR

Got my Pilotlamp yesterday

I hope you find a way to go on with your good work.

Maybe I wanna donate you a new one.

KeesvR

WOT = Wide Open Throttle.

How does Headfree work:
When you use headfree and give some pitch forward the copter flies to the north for example, even if you give some yaw and the multi spins around it keeps flying to the north.
This is the same for all direction.

KeesvR

Hoi Hans, I think the XP version is not working like it should, I've got the same result with XP as with Vista. When i switch on for example RC Options Beep and push save button and load the same configH again its back to off. Also for the things I earlier said. My Vista PC is finaly dead , to expen...

KeesvR

Yesterday my Vista pc crashed after 5 years of no problems with it, I'm now on my wife's W7 laptop, but I never use this machine for my use (maybee better ). So now I need to test the Prelude on my old XP laptop, this one I only use in the field for setup. When my pc is back, I'll try another version.

KeesvR

Hoi Hans, Now the XP version is working with Vista. Some things I found: - When I change the failsafe throttle to 250 and save the file it stays at 200. - The same thing with RC options beep. - The same with Failsafe values. - LCD_TELEMETRY_AUTO_FREQ I can only set 3 numbers, I like to set it to 150...

KeesvR

Not working with my Vista Pc, tomorrow I'll try it with my old XP laptop.

KeesvR

Hoi Hans,

I've tried both, but no luck. So thats why I asked.

KeesvR

I only see Windows 7 and XP, witch one can I use for Vista ?

KeesvR

You've got 2 aux channels on your DX6i.
Look over here for the best use of these: viewtopic.php?f=13&t=1740&p=14843&

KeesvR

Yes, it's not only for a Quad but for all kind of Multicopters.

KeesvR

PID will not help with this problem.
This must be a power issue.
- To weak Lipo
- Wiring to thin
- Bad soldering

KeesvR

Hold left mouse button down and move it left or right to change the numbers.

KeesvR

In Heli mode you can use these settings: http://www.rcgroups.com/forums/showpost ... count=6317

KeesvR

Hi EosBandi, could you include a text file with instructions. There have bin a lot of questions answered in this topic, but its not easy to find these back because this topic is growing fast. As I read here you've made a lot of improvement, I hope I can find some time soon to test these things. Tha...

KeesvR

Hi EosBandi, could you include a text file with instructions. There have bin a lot of questions answered in this topic, but its not easy to find these back because this topic is growing fast. As I read here you've made a lot of improvement, I hope I can find some time soon to test these things. Than...

KeesvR

I think my GPS is not working anymore.
So I can't test anymore.

KeesvR

For me the serial monitor doesn't work with the FTDI.
I tried it with bluetooth then it was working.

I've set my FTDI to 3.3V especially for the Navigatron, maybe thats the reason why its not working like it should.

KeesvR

I also tried this with the same result as Micropuller. We both live in The Netherlands so our altitude is below sea level, maybe this has something to do with this. I know PatrikE said something about this in the past. I've found it: http://www.multiwii.com/forum/viewtopic.php?p=10757#p10757 Strang...

KeesvR

I also tried this with the same result as Micropuller.

We both live in The Netherlands so our altitude is below sea level, maybe this has something to do with this.
I know PatrikE said something about this in the past.

I've found it:
viewtopic.php?p=10757#p10757

KeesvR

@EOSBandi: Have you seen my problem? What do you think about this?
viewtopic.php?p=12548#p12548

I'm not the only one with this problem.

KeesvR

When you fly an X-Quad with sensorboard 45 degrees rotated, you can select P-Quad. Easy thinking.

KeesvR

Welcome back, maybe soon I can test GPS.

KeesvR

Nice to here your problem is solved, maybe your old ones become good (as it are atmel) after flashing them with Simon Kirby's software.
http://www.rcgroups.com/forums/showthread.php?t=1513678

KeesvR

Thanks again, time to learn for me to better understand all these things.

KeesvR

Thank you Nils, I appreciate you like to help me, but I really don't know what I do when I change something in the code.

Is it right when i change this ">> 4" (bigger then) to this "== 4 (equal to).

KeesvR

Is it oke when I remover these signs in red? Sorry but I'm not a coder if (_i2c_gps_status & I2C_GPS_STATUS_3DFIX) { //Check is we have a good 3d fix (numsats>5) GPS_fix = 1; //Set fix GPS_numSat = (_i2c_gps_st...

KeesvR

I don't know how to do that, can you give me a hint.

KeesvR

Here you've got a hole list of usable Esc's: https://docs.google.com/spreadsheet/ccc ... ZRlE#gid=0

KeesvR

Thanks Patrik and Tommie, I got it working now.

KeesvR

The normal way = double click on the exe file.

I just saved it not export, when I try to export I get: Could not find the applet size.

KeesvR

Yes, we must wait till EosBandi is back to change this.

Search found 194 matches