MultiWii

Does the three led's on the flip32 have a blinking pattern to show gps sattelites when using cleanflight?
The MW pro indicates with the ble led blinking. Anything like that on cleanflight and flip32?

Where do i add the path location? what file??

My buzzer keeps beeping constantly during flight. Why? Im flying a flip32 w tha latest stable cleanflight sw.

So i went out and tested. First test i ran pid 3.3/0,030/23. Hovers ok and i hit autotune. The dmn thing starts beeping and does its thing while climbing FAST. I lower throttle but it still climbs. I cut throttle and get it to fall and then throttle up but now its unflyable so i just let it crash. N...

I am having the same problem! I moved my board from my tricoper to a x config and im using the b7 sketch downloaded from EOSbandi's web page. Copter flipps over when i throttle up and i. Gui it looks like yours on the rpm readout. When i tried a diffrent mw pro board but with same sketch it behaved ...

Appstore show version 1.0.1. Is that the latest? What happens if i tune PIDs and upload to board while in flight?

Great work!!!
Hope it keeps developing. Bought the app.
Keep the info coming and if there is a web page or blog to follow please link.

MultiWii.cpp.o: In function `loop':
C:\Users\ko\AppData\Local\Temp\build7510146013775629607.tmp/MultiWii.cpp:1293: undefined reference to `GPS_mode'

Im getting this error but i dont know whats causing it and how to fix it.

Anyone who can help?

I have a Tunigu 9x v2 and under failsafe menu there is options to set more channels than 1-4 to a failsafe state. Am i wrong in assuming you can then set switch posissions to a failsafe state also? I am not able to set any onther values beyond the sticks in this option. Would be nice to set the 3 po...

I have a Tunigu 9x v2 and under failsafe menu there is options to set more channels than 1-4 to a failsafe state. Am i wrong in assuming you can then set switch posissions to a failsafe state also? I am not able to set any onther values beyond the sticks in this option. Would be nice to set the 3 po...

Im at work now so im relying on my memory of the board. Was experiencing something like this my self. I beleve the LED flashing you refer to are signaling that you need to calibrate acc. Should have nothing to do with connection issue. Assuming you are trying to connect via the new 2.3 GUI interface...

Is it possible to add a code that lets you enter mag calib like many others do by operating the 3 posision switch 6-10 times?

Enabled baro, mag, stable and pos hold in GUI. It have been very windy since my post so i havent had a chance to investigate any more atm. Can a 400mw fpv transmitter effect the gps or mag to make it tilt to the left? I have my fpv trasmitter set up on the middle of the left T arm. Gps and board are...

Yesterday i tried the multiwii again after a time on the kk2 board. First off it have a tick or a twitch when hovering in stable mode. What could cause this? PID`s are stock values at the moment. Could this be it? Second issue was when i put on POS hold the tricopter waits for 1 sec and tilts hard l...

I am trying to test my multiwii board without putting it in a copter. I have the Rx connected correctly, Gps and LCD is working fine and reciving signals as they are suppose to from the Tx. I have Turnigy 9x v2 . I tries connecting one motor and esc to observe the failsafe routine on the motor etc. ...

I have multiwii pro w gps.
GPS Works on original multiwii 2.2. Never got to try thisone With failsafe since i got compile error.
GPS holds posision fine on 2.2 and comes home fine but after it comes home it flies off. Mag Decl is correst for my location.
Conf.h file is to long to be posted here.

hit verify in arduino and got this error: MultiWii.ino: In function 'void loop()': MultiWii:1624: error: 'GPSNavReset' was not declared in this scope And line GPSNavReset = 0; was marked yellow. How to fix and what is this error? #if defined(FAILSAFE) && defined(FAILSAFE_RTH_MODE) &&...

Ok thanks! I'll figure the config.h out

I have read this thread but i have a few questions.
Can i just download and flash with the latest code from here and expect my quad to work as before just now with rth failsafe?
Do i have to do any coments or uncomments to make it work?
Im running multiwii pro w gps and simon k flashed esc's.