Search found 36 matches

by Nickman1200
Sat Oct 11, 2014 8:13 pm
Forum: Ideas
Topic: Direct Frsky telemtry data from MW FC
Replies: 359
Views: 1157324

Re: Direct Frsky telemtry data from MW FC

/****** Serial com speed *********************************/ /* This is the speed of the serial interfaces */ #define SERIAL0_COM_SPEED 115200 // BT #define SERIAL1_COM_SPEED 115200 #define SERIAL2_COM_SPEED 57600 // GPS #define SERIAL3_COM_SPEED 9600 // Telemetry FRSKY Also set this to the right sp...
by Nickman1200
Wed Sep 17, 2014 6:57 pm
Forum: Shields, boards and sensors
Topic: HK MultiWii 328P Flight Controller w/FTDI & DSM2 Port
Replies: 7
Views: 15414

Re: HK MultiWii 328P Flight Controller w/FTDI & DSM2 Port

can anyone give me some further information on how to use ax2, ax3 for bluetooth connection please... thanks Alun Just look at the picture above. All information is there Connect: TX on the BT module to RXI (AX2) RX on the BT module to TX0 (AX3) GND to GND on either AX3 or AX2 VCC to VCC on either ...
by Nickman1200
Wed Sep 17, 2014 6:30 pm
Forum: Ideas
Topic: 6 position switch
Replies: 4
Views: 2481

Re: 6 position switch

You can use the switch + another to toggle "banks"

1-pos sw: 0
3-pos sw: 1, 2 ,3
1-pos sw: 1
3-pos sw: 4, 5, 6

But as you say. Not possible to use just one 3 pos switch as 6 pos.
by Nickman1200
Thu Sep 11, 2014 7:36 pm
Forum: Software development
Topic: GPS NAV
Replies: 964
Views: 401379

Re: GPS NAV

Excellent news. Very glad to see you back. :D
by Nickman1200
Wed Sep 10, 2014 10:35 pm
Forum: Ideas
Topic: Direct Frsky telemtry data from MW FC
Replies: 359
Views: 1157324

Re: Direct Frsky telemtry data from MW FC

!!!!!! As my tricopter is grounded for the moment its not flight tested yet. BE CAREFUL !!!!!! Yesterday and today I have worked on adding frsky to EOS GPS mission branch. (and thus will not work on 328p but i can make a version for the current SVN if that is prefered) To day i got it to compile and...
by Nickman1200
Wed Sep 03, 2014 8:39 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621277

Re: MultiWii EZ-GUI

ezio, can you (or someone else) explain FrSky support in EZ-GUI? I don't understand how it works. Tnx! Support for FrSky hasn't been updated for a while now and I will probably remove it in the future. It works like this: You connect multiwii board to frsky receiver (it had to be one with telemetry...
by Nickman1200
Wed Jul 16, 2014 9:47 pm
Forum: Ideas
Topic: What you don't like in EZ-GUI?
Replies: 51
Views: 16782

Re: What you don't like in EZ-GUI?

Any chance getting the old skin as an option ?
by Nickman1200
Sun Jun 01, 2014 4:03 pm
Forum: Connecting elements
Topic: HK 328p GPS and OSD
Replies: 4
Views: 2125

Re: HK 328p GPS and OSD

Connect the GPS to the i2c bus with a I2Cnav board. And the OSD to the serial port.
by Nickman1200
Sat Nov 09, 2013 10:21 am
Forum: Software development
Topic: TinyGPS
Replies: 4
Views: 1779

Re: TinyGPS

http://www.multiwii.com/forum/viewtopic.php?f=8&t=3989&start=20#p42062 @EOSBandi I' also interested that is there anyone who uses tinyGPS and GPSfromOSD ? It seems quite abandoned and sometimes buggy. I recommend to drop it from the main codebase. @Hamburger Tinygps is gone in pre v2.3 now. ...
by Nickman1200
Sun Oct 06, 2013 7:05 pm
Forum: Ideas
Topic: What you don't like in EZ-GUI?
Replies: 51
Views: 16782

Re: What you don't like in EZ-GUI?

As long as it is non essential features. Go for it.
by Nickman1200
Mon Sep 23, 2013 6:03 pm
Forum: Ideas
Topic: What you don't like in EZ-GUI?
Replies: 51
Views: 16782

Re: What you don't like in EZ-GUI?

Missing features from 2.3 in the same fashion as the rest is now :)
by Nickman1200
Tue Sep 03, 2013 7:29 pm
Forum: Software development
Topic: [PATCH] Support Crius SE V2.0
Replies: 4
Views: 2447

Re: [PATCH] Support Crius SE V2.0

Wait for Hamburger or Alex to pick this up and add it to the SVN.
Chill for a week or two :)
by Nickman1200
Sat Aug 31, 2013 6:32 pm
Forum: Software development
Topic: individual replacement of defaults in code
Replies: 6
Views: 8632

Re: individual replacement of defaults in code

In the voice of Mr. Burns: "Eeeeexellent!"
by Nickman1200
Fri Aug 30, 2013 7:17 pm
Forum: Software development
Topic: individual replacement of defaults in code
Replies: 6
Views: 8632

Re: individual replacement of defaults in code

This is relay handy. Will use on my copter when i find the time.
Thanks Hamburger.
by Nickman1200
Thu Aug 22, 2013 4:07 pm
Forum: Ideas
Topic: Direct Frsky telemtry data from MW FC
Replies: 359
Views: 1157324

Re: Direct Frsky telemtry data from MW FC

@Timecop: Where did you get this tiny transistor PCBA from shown in http://www.multiwii.com/forum/viewtopic.php?f=7&t=1929&p=19309&hilit=frskyadp#p19309 I guess it is just the well known voltage inversion circuit? I cant see the picture right now but HK has a nice small one i use. FrSky...
by Nickman1200
Wed Aug 21, 2013 6:29 pm
Forum: Pictures & Videos
Topic: FPV at wind turbine
Replies: 1
Views: 1591

Re: FPV at wind turbine

Nice video :D thanks for sharing.
by Nickman1200
Wed Aug 21, 2013 11:02 am
Forum: Ideas
Topic: Direct Frsky telemtry data from MW FC
Replies: 359
Views: 1157324

Re: Direct Frsky telemtry data from MW FC

@Timecop: Where did you get this tiny transistor PCBA from shown in http://www.multiwii.com/forum/viewtopic.php?f=7&t=1929&p=19309&hilit=frskyadp#p19309 I guess it is just the well known voltage inversion circuit? I cant see the picture right now but HK has a nice small one i use. FrSky...
by Nickman1200
Wed Aug 21, 2013 10:58 am
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621277

Re: MultiWii EZ-GUI

1) if you dont have any GSM/3G network data on your tablet you wont see any maps. EZ-GUI doesn't store any maps offline. 2,3) Multiwii hasn't got "real" way point / flight mission functions yet. I Think eiso made this to just move the home coordinate right now. And you need to be in Blueto...
by Nickman1200
Mon Aug 19, 2013 9:14 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621277

Re: MultiWii EZ-GUI

I had an interesting adventure with this fabulous tool, I did not read all 66 pages of this thread to see if anyone experienced this, but i was doing some PID tuning and at some point I must have restarted the exgui and not hit read, or something, i dont know, but i was making changes to my YAW rat...
by Nickman1200
Mon Aug 19, 2013 5:04 pm
Forum: Connecting elements
Topic: 328p gps
Replies: 8
Views: 4352

Re: 328p gps

My GPS LED is always green and the i2c-nav board will flash 3 short and 1 long when 3D locked. (more then 5 sat i think) To flash your nav card you can use an FTDI programmer and connect to the FTDI port. (You got the pins when you bought it but you need to solder it to the board if you havent alrea...
by Nickman1200
Sun Aug 18, 2013 6:58 pm
Forum: Connecting elements
Topic: 328p gps
Replies: 8
Views: 4352

Re: 328p gps

Have you updated your firmware on the I2C-Nav board ?
What GPS do you have ?

I have this i2c-nav card flashed with Rev 62.
And this ublox GPS

I followed this excellent guide on RCGroups and it worked great.
by Nickman1200
Sat Aug 17, 2013 8:21 pm
Forum: Connecting elements
Topic: i2c GPS and HK 328p FC (USB vs BT)
Replies: 5
Views: 2863

Re: i2c GPS and HK 328p FC (USB vs BT)

r3dskull wrote:Hey Nick did you connect the I2C-GPS-NAV directly to the 3.3v connector for I2C on the HK board?


Yes i connected it directly to the i2c bus on the HK board.
SDA - SDA
SCL - SCL
3,3V - VCC
GND - GND
by Nickman1200
Sat Aug 17, 2013 8:17 pm
Forum: Ideas
Topic: Direct Frsky telemtry data from MW FC
Replies: 359
Views: 1157324

Re: Direct Frsky telemtry data from MW FC

I did the same. Used disq version as i need soft serial and put it in the current SVN version,
It's realy nice and clean already so I hope Sebbi finish his Unified communication bransh so we can have it easier.
by Nickman1200
Fri Aug 16, 2013 7:56 am
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621277

Re: MultiWii EZ-GUI

Perhaps not the right place to ask, but a lot of readers here might have the same question I already have modified my 9X with Frsky telemetry, which is working great, using this mod: http://openrcforums.com/wiki/index.php/File:Frsky_telemetry_mod_overview1.jpg But I would like to try to have the sa...
by Nickman1200
Tue Aug 13, 2013 7:36 pm
Forum: Connecting elements
Topic: i2c GPS and HK 328p FC (USB vs BT)
Replies: 5
Views: 2863

Re: i2c GPS and HK 328p FC (USB vs BT)

Looks like it's working :)
by Nickman1200
Tue Aug 13, 2013 7:22 pm
Forum: Connecting elements
Topic: i2c GPS and HK 328p FC (USB vs BT)
Replies: 5
Views: 2863

Re: i2c GPS and HK 328p FC (USB vs BT)

Is this the right place to change YAW direction in the code ?

output.cpp

#elif defined( TRI )
servo[5] = (SERVODIR(5, 1) * axisPID[YAW]) + get_middle(5); //REAR

To

#elif defined( TRI )
servo[5] = (SERVODIR(5, 1) * (axisPID[YAW]*-1)) + get_middle(5); //REAR
by Nickman1200
Tue Aug 13, 2013 5:01 pm
Forum: Connecting elements
Topic: i2c GPS and HK 328p FC (USB vs BT)
Replies: 5
Views: 2863

i2c GPS and HK 328p FC (USB vs BT)

Hi, I have a problem that Multiwii config show i2c errors when i have my i2c gps connected and i use USB. BUT i have no i2c errors when i connect to the FC with Bluetooth instead and EZ-Gui. This would be OK if it where not for that i need Multiwii config to set inverted YAW and i cant get my comput...
by Nickman1200
Sat Aug 10, 2013 7:20 pm
Forum: Ideas
Topic: Direct Frsky telemtry data from MW FC
Replies: 359
Views: 1157324

Re: Direct Frsky telemtry data from MW FC

Just wanted to say thank you and i hope this is included some way in to main branch in the future. I'm using this on my HK 328p FC with soft serial and a modded TH9X receiver. Also added a BT module on the receiver and enjoy using EZ-Gui and Frsky dashboard on my phone. Now if i could have on versio...
by Nickman1200
Fri Jul 19, 2013 1:52 pm
Forum: Software development
Topic: why more flight modes in GUI 2.1 than 2.2.
Replies: 6
Views: 3084

Re: why more flight modes in GUI 2.1 than 2.2.

ARM - Arms your motors. ACRO - This mode is the default mode when HORIZON or ANGLE are not activated. Only gyros are used for stabilisation. ANGLE - Provides a stable flight mode. Uses gyro and accelerometer. (or) HORIZON - A mixture between ACRO and ANGLE combining the stabilising effect in case o...
by Nickman1200
Mon Jul 15, 2013 7:50 pm
Forum: Software development
Topic: MultiWii EZ-GUI
Replies: 1434
Views: 621277

Re: MultiWii EZ-GUI

Hi Ezio, Love your program and will register to show my support soon. One thing i wanted to ask is if you are planning on adding more features (settings) from multiwiiconf. Maybe after mw 2.3 is released ? Examples: pAlarm mintrottle vbatscale (and warning1, 2, crtitcal) mag decl and the new servo s...
by Nickman1200
Sat Jul 13, 2013 7:21 pm
Forum: Shields, boards and sensors
Topic: HK MultiWii 328P Flight Controller w/FTDI & DSM2 Port
Replies: 7
Views: 15414

HK MultiWii 328P Flight Controller w/FTDI & DSM2 Port

As I didn't find a dedicated thread about this board in this forum here we go. This is sold by Hobby King: MultiWii_328P_Flight_Controller_w_FTDI_DSM2_Port In config.h from MultiWii v2.2 and newer choose: #define HK_MultiWii_328P also #define RCAUXPIN12 (seen in the pricture below) One thing I found...
by Nickman1200
Sun Jul 07, 2013 6:50 pm
Forum: Software development
Topic: MultiConf Port to Android TabletWifi
Replies: 71
Views: 22256

Re: MultiConf Port to Android

Any news on this ? :)
by Nickman1200
Sat Jul 06, 2013 11:40 am
Forum: Pictures & Videos
Topic: Tricopter + Multiwii = FTW
Replies: 0
Views: 1166

Tricopter + Multiwii = FTW

This is my first RC multirotor. Built it from the plans of the master David http://rcexplorer.se/projects/2011/09/the-tricopter-v2-5/ Took some tweaking on PID to get it stable but now it flies great. Third time out flying i did my first roll and loop. I love Horizon mode Pictures: https://www.dropb...
by Nickman1200
Sat Jul 06, 2013 11:32 am
Forum: Software development
Topic: V2.2 - ACRO PID implementation is wrong, right?
Replies: 282
Views: 182862

Re: V2.2 - ACRO PID implementation is wrong, right?

Hi, has anyone compiled conf which can share. I've tried but it is going slowly out of range my knowledge :0 I only like one mode - acro so it would be nice to test that great pid controller. I'm little fighting with my small quad on HK Nanowii. My lately problems with it: m Here is a build i made ...