Search found 36 matches
- Sat Oct 11, 2014 8:13 pm
- Forum: Ideas
- Topic: Direct Frsky telemtry data from MW FC
- Replies: 359
- Views: 1162731
Re: Direct Frsky telemtry data from MW FC
/****** Serial com speed *********************************/ /* This is the speed of the serial interfaces */ #define SERIAL0_COM_SPEED 115200 // BT #define SERIAL1_COM_SPEED 115200 #define SERIAL2_COM_SPEED 57600 // GPS #define SERIAL3_COM_SPEED 9600 // Telemetry FRSKY Also set this to the right sp...
- Wed Sep 17, 2014 6:57 pm
- Forum: Shields, boards and sensors
- Topic: HK MultiWii 328P Flight Controller w/FTDI & DSM2 Port
- Replies: 7
- Views: 15524
Re: HK MultiWii 328P Flight Controller w/FTDI & DSM2 Port
can anyone give me some further information on how to use ax2, ax3 for bluetooth connection please... thanks Alun Just look at the picture above. All information is there Connect: TX on the BT module to RXI (AX2) RX on the BT module to TX0 (AX3) GND to GND on either AX3 or AX2 VCC to VCC on either ...
- Wed Sep 17, 2014 6:30 pm
- Forum: Ideas
- Topic: 6 position switch
- Replies: 4
- Views: 2537
Re: 6 position switch
You can use the switch + another to toggle "banks"
1-pos sw: 0
3-pos sw: 1, 2 ,3
1-pos sw: 1
3-pos sw: 4, 5, 6
But as you say. Not possible to use just one 3 pos switch as 6 pos.
1-pos sw: 0
3-pos sw: 1, 2 ,3
1-pos sw: 1
3-pos sw: 4, 5, 6
But as you say. Not possible to use just one 3 pos switch as 6 pos.
- Thu Sep 11, 2014 7:36 pm
- Forum: Software development
- Topic: GPS NAV
- Replies: 964
- Views: 411710
Re: GPS NAV
Excellent news. Very glad to see you back.
- Wed Sep 10, 2014 10:35 pm
- Forum: Ideas
- Topic: Direct Frsky telemtry data from MW FC
- Replies: 359
- Views: 1162731
Re: Direct Frsky telemtry data from MW FC
!!!!!! As my tricopter is grounded for the moment its not flight tested yet. BE CAREFUL !!!!!! Yesterday and today I have worked on adding frsky to EOS GPS mission branch. (and thus will not work on 328p but i can make a version for the current SVN if that is prefered) To day i got it to compile and...
- Wed Sep 03, 2014 8:39 pm
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741468
Re: MultiWii EZ-GUI
ezio, can you (or someone else) explain FrSky support in EZ-GUI? I don't understand how it works. Tnx! Support for FrSky hasn't been updated for a while now and I will probably remove it in the future. It works like this: You connect multiwii board to frsky receiver (it had to be one with telemetry...
- Wed Jul 16, 2014 9:47 pm
- Forum: Ideas
- Topic: What you don't like in EZ-GUI?
- Replies: 51
- Views: 17210
Re: What you don't like in EZ-GUI?
Any chance getting the old skin as an option ?
- Sun Jun 01, 2014 4:03 pm
- Forum: Connecting elements
- Topic: HK 328p GPS and OSD
- Replies: 4
- Views: 2160
Re: HK 328p GPS and OSD
Connect the GPS to the i2c bus with a I2Cnav board. And the OSD to the serial port.
- Sat Nov 09, 2013 10:21 am
- Forum: Software development
- Topic: TinyGPS
- Replies: 4
- Views: 1818
Re: TinyGPS
http://www.multiwii.com/forum/viewtopic.php?f=8&t=3989&start=20#p42062 @EOSBandi I' also interested that is there anyone who uses tinyGPS and GPSfromOSD ? It seems quite abandoned and sometimes buggy. I recommend to drop it from the main codebase. @Hamburger Tinygps is gone in pre v2.3 now. ...
- Sun Oct 06, 2013 7:05 pm
- Forum: Ideas
- Topic: What you don't like in EZ-GUI?
- Replies: 51
- Views: 17210
Re: What you don't like in EZ-GUI?
As long as it is non essential features. Go for it.
- Mon Sep 23, 2013 6:03 pm
- Forum: Ideas
- Topic: What you don't like in EZ-GUI?
- Replies: 51
- Views: 17210
Re: What you don't like in EZ-GUI?
Missing features from 2.3 in the same fashion as the rest is now
- Tue Sep 03, 2013 7:29 pm
- Forum: Software development
- Topic: [PATCH] Support Crius SE V2.0
- Replies: 4
- Views: 2495
Re: [PATCH] Support Crius SE V2.0
Wait for Hamburger or Alex to pick this up and add it to the SVN.
Chill for a week or two
Chill for a week or two
- Sat Aug 31, 2013 6:32 pm
- Forum: Software development
- Topic: individual replacement of defaults in code
- Replies: 6
- Views: 8723
Re: individual replacement of defaults in code
In the voice of Mr. Burns: "Eeeeexellent!"
- Fri Aug 30, 2013 7:17 pm
- Forum: Software development
- Topic: individual replacement of defaults in code
- Replies: 6
- Views: 8723
Re: individual replacement of defaults in code
This is relay handy. Will use on my copter when i find the time.
Thanks Hamburger.
Thanks Hamburger.
- Thu Aug 22, 2013 4:07 pm
- Forum: Ideas
- Topic: Direct Frsky telemtry data from MW FC
- Replies: 359
- Views: 1162731
Re: Direct Frsky telemtry data from MW FC
@Timecop: Where did you get this tiny transistor PCBA from shown in http://www.multiwii.com/forum/viewtopic.php?f=7&t=1929&p=19309&hilit=frskyadp#p19309 I guess it is just the well known voltage inversion circuit? I cant see the picture right now but HK has a nice small one i use. FrSky...
- Wed Aug 21, 2013 9:39 pm
- Forum: Ideas
- Topic: Direct Frsky telemtry data from MW FC
- Replies: 359
- Views: 1162731
- Wed Aug 21, 2013 6:29 pm
- Forum: Pictures & Videos
- Topic: FPV at wind turbine
- Replies: 1
- Views: 1630
Re: FPV at wind turbine
Nice video thanks for sharing.
- Wed Aug 21, 2013 11:02 am
- Forum: Ideas
- Topic: Direct Frsky telemtry data from MW FC
- Replies: 359
- Views: 1162731
Re: Direct Frsky telemtry data from MW FC
@Timecop: Where did you get this tiny transistor PCBA from shown in http://www.multiwii.com/forum/viewtopic.php?f=7&t=1929&p=19309&hilit=frskyadp#p19309 I guess it is just the well known voltage inversion circuit? I cant see the picture right now but HK has a nice small one i use. FrSky...
- Wed Aug 21, 2013 10:58 am
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741468
Re: MultiWii EZ-GUI
1) if you dont have any GSM/3G network data on your tablet you wont see any maps. EZ-GUI doesn't store any maps offline. 2,3) Multiwii hasn't got "real" way point / flight mission functions yet. I Think eiso made this to just move the home coordinate right now. And you need to be in Blueto...
- Mon Aug 19, 2013 9:14 pm
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741468
Re: MultiWii EZ-GUI
I had an interesting adventure with this fabulous tool, I did not read all 66 pages of this thread to see if anyone experienced this, but i was doing some PID tuning and at some point I must have restarted the exgui and not hit read, or something, i dont know, but i was making changes to my YAW rat...
- Mon Aug 19, 2013 5:04 pm
- Forum: Connecting elements
- Topic: 328p gps
- Replies: 8
- Views: 4430
Re: 328p gps
My GPS LED is always green and the i2c-nav board will flash 3 short and 1 long when 3D locked. (more then 5 sat i think) To flash your nav card you can use an FTDI programmer and connect to the FTDI port. (You got the pins when you bought it but you need to solder it to the board if you havent alrea...
- Sun Aug 18, 2013 6:58 pm
- Forum: Connecting elements
- Topic: 328p gps
- Replies: 8
- Views: 4430
Re: 328p gps
Have you updated your firmware on the I2C-Nav board ?
What GPS do you have ?
I have this i2c-nav card flashed with Rev 62.
And this ublox GPS
I followed this excellent guide on RCGroups and it worked great.
What GPS do you have ?
I have this i2c-nav card flashed with Rev 62.
And this ublox GPS
I followed this excellent guide on RCGroups and it worked great.
- Sat Aug 17, 2013 8:21 pm
- Forum: Connecting elements
- Topic: i2c GPS and HK 328p FC (USB vs BT)
- Replies: 5
- Views: 2906
Re: i2c GPS and HK 328p FC (USB vs BT)
r3dskull wrote:Hey Nick did you connect the I2C-GPS-NAV directly to the 3.3v connector for I2C on the HK board?
Yes i connected it directly to the i2c bus on the HK board.
SDA - SDA
SCL - SCL
3,3V - VCC
GND - GND
- Sat Aug 17, 2013 8:17 pm
- Forum: Ideas
- Topic: Direct Frsky telemtry data from MW FC
- Replies: 359
- Views: 1162731
Re: Direct Frsky telemtry data from MW FC
I did the same. Used disq version as i need soft serial and put it in the current SVN version,
It's realy nice and clean already so I hope Sebbi finish his Unified communication bransh so we can have it easier.
It's realy nice and clean already so I hope Sebbi finish his Unified communication bransh so we can have it easier.
- Fri Aug 16, 2013 7:56 am
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741468
Re: MultiWii EZ-GUI
Perhaps not the right place to ask, but a lot of readers here might have the same question I already have modified my 9X with Frsky telemetry, which is working great, using this mod: http://openrcforums.com/wiki/index.php/File:Frsky_telemetry_mod_overview1.jpg But I would like to try to have the sa...
- Tue Aug 13, 2013 7:36 pm
- Forum: Connecting elements
- Topic: i2c GPS and HK 328p FC (USB vs BT)
- Replies: 5
- Views: 2906
Re: i2c GPS and HK 328p FC (USB vs BT)
Looks like it's working
- Tue Aug 13, 2013 7:22 pm
- Forum: Connecting elements
- Topic: i2c GPS and HK 328p FC (USB vs BT)
- Replies: 5
- Views: 2906
Re: i2c GPS and HK 328p FC (USB vs BT)
Is this the right place to change YAW direction in the code ?
output.cpp
#elif defined( TRI )
servo[5] = (SERVODIR(5, 1) * axisPID[YAW]) + get_middle(5); //REAR
To
#elif defined( TRI )
servo[5] = (SERVODIR(5, 1) * (axisPID[YAW]*-1)) + get_middle(5); //REAR
output.cpp
#elif defined( TRI )
servo[5] = (SERVODIR(5, 1) * axisPID[YAW]) + get_middle(5); //REAR
To
#elif defined( TRI )
servo[5] = (SERVODIR(5, 1) * (axisPID[YAW]*-1)) + get_middle(5); //REAR
- Tue Aug 13, 2013 5:01 pm
- Forum: Connecting elements
- Topic: i2c GPS and HK 328p FC (USB vs BT)
- Replies: 5
- Views: 2906
i2c GPS and HK 328p FC (USB vs BT)
Hi, I have a problem that Multiwii config show i2c errors when i have my i2c gps connected and i use USB. BUT i have no i2c errors when i connect to the FC with Bluetooth instead and EZ-Gui. This would be OK if it where not for that i need Multiwii config to set inverted YAW and i cant get my comput...
- Sat Aug 10, 2013 8:02 pm
- Forum: Software development
- Topic: Unified communication (for telemetry, GUI, logging, etc)
- Replies: 21
- Views: 7995
Re: Unified communication (for telemetry, GUI, logging, etc)
Any news on this Sebbi ?
- Sat Aug 10, 2013 7:20 pm
- Forum: Ideas
- Topic: Direct Frsky telemtry data from MW FC
- Replies: 359
- Views: 1162731
Re: Direct Frsky telemtry data from MW FC
Just wanted to say thank you and i hope this is included some way in to main branch in the future. I'm using this on my HK 328p FC with soft serial and a modded TH9X receiver. Also added a BT module on the receiver and enjoy using EZ-Gui and Frsky dashboard on my phone. Now if i could have on versio...
- Fri Jul 19, 2013 1:52 pm
- Forum: Software development
- Topic: why more flight modes in GUI 2.1 than 2.2.
- Replies: 6
- Views: 3163
Re: why more flight modes in GUI 2.1 than 2.2.
ARM - Arms your motors. ACRO - This mode is the default mode when HORIZON or ANGLE are not activated. Only gyros are used for stabilisation. ANGLE - Provides a stable flight mode. Uses gyro and accelerometer. (or) HORIZON - A mixture between ACRO and ANGLE combining the stabilising effect in case o...
- Mon Jul 15, 2013 7:50 pm
- Forum: Software development
- Topic: MultiWii EZ-GUI
- Replies: 1434
- Views: 741468
Re: MultiWii EZ-GUI
Hi Ezio, Love your program and will register to show my support soon. One thing i wanted to ask is if you are planning on adding more features (settings) from multiwiiconf. Maybe after mw 2.3 is released ? Examples: pAlarm mintrottle vbatscale (and warning1, 2, crtitcal) mag decl and the new servo s...
- Sat Jul 13, 2013 7:21 pm
- Forum: Shields, boards and sensors
- Topic: HK MultiWii 328P Flight Controller w/FTDI & DSM2 Port
- Replies: 7
- Views: 15524
HK MultiWii 328P Flight Controller w/FTDI & DSM2 Port
As I didn't find a dedicated thread about this board in this forum here we go. This is sold by Hobby King: MultiWii_328P_Flight_Controller_w_FTDI_DSM2_Port In config.h from MultiWii v2.2 and newer choose: #define HK_MultiWii_328P also #define RCAUXPIN12 (seen in the pricture below) One thing I found...
- Sun Jul 07, 2013 6:50 pm
- Forum: Software development
- Topic: MultiConf Port to Android TabletWifi
- Replies: 71
- Views: 22753
Re: MultiConf Port to Android
Any news on this ?
- Sat Jul 06, 2013 11:40 am
- Forum: Pictures & Videos
- Topic: Tricopter + Multiwii = FTW
- Replies: 0
- Views: 1191
Tricopter + Multiwii = FTW
This is my first RC multirotor. Built it from the plans of the master David http://rcexplorer.se/projects/2011/09/the-tricopter-v2-5/ Took some tweaking on PID to get it stable but now it flies great. Third time out flying i did my first roll and loop. I love Horizon mode Pictures: https://www.dropb...
- Sat Jul 06, 2013 11:32 am
- Forum: Software development
- Topic: V2.2 - ACRO PID implementation is wrong, right?
- Replies: 282
- Views: 189394
Re: V2.2 - ACRO PID implementation is wrong, right?
Hi, has anyone compiled conf which can share. I've tried but it is going slowly out of range my knowledge :0 I only like one mode - acro so it would be nice to test that great pid controller. I'm little fighting with my small quad on HK Nanowii. My lately problems with it: m Here is a build i made ...