MultiWii

I have a flip 1.5 board and I use a taranis radio. The flip won't arm. The taranis says min throttle and rudder is 988us. But multiwii configuration says the min reading for both is around 1024. I don't have a spare switch to dedicate to arming. Any thoughts on why it won't arm? Can I easily change ...

I'm using 2.2 code if that matters. I'm looking through config.h and I don't see where the servo pins are defined. Can you give me an example so I can find it? If I search for D12 the only line that comes up is //#define D12_POWER // Use D12 on PROMINI to power sensors. Will disable servo[4] on D12

I have a Flip 1.5 board from witespyquad. I would like to know how to set it up for airplane mode. I started looking at this thread but I'm confused as to the pinout. I see it mentioned to use the D11 and D12 pins or D6 and D37, But D6 is the rudder input and D12 is the AUX2 input and D37 doesn't ex...

I've got the readytoflyquads pro board and the baro on it is bad too. I've seen it as low as -20m with the motors never turning on, just as It was sitting there on the table.

I replaced the weird motor and it seems to have fixed it. I'll do more testing and report back it the problem comes back.

I'm new to multiwii. My board has 2.2 on it. where do I get 2.3 when it comes out? Will it be posted here? I've got an issue where the rear left motor doesn't power up correctly and I'm hoping 2.3 will fix it.
Thanks

I'm having the same issue. I got 4 or 5 good flights and now the left rear motor only spins up to 1/4 power. I used the android app to watch what the multiwii board is setting the motors to and while the other motors go up to close to 2000 at full throttle the rear left only goes to 1200. I'm not su...

Thanks, does it look like the right options I chose in the first post above?

as a followup question, I just tried the android app and I read back the setting from the board and the settings are different. Which one is correct? the chrome app or the android app?

checkboxes.jpg I'm about ready to try to fly my quad for the first time with a Readytoflyquads multiwii pro 3.0. I'm a noob so I want it as stable as possible. Is this how I would use the setup program to select the correct stuff? Does it look like the correct options to always have it in stable mo...

Is there a manual somewhere I'm missing on the boards? How to set them up, use the PC app, etc?