Search found 11 matches
- Sun Nov 17, 2013 4:32 pm
- Forum: Software development
- Topic: !warning!
- Replies: 1
- Views: 1057
!warning!
I am sure this has been posted but, if you load 2.3 and try to config with the 2.2 GUI, your copter will go full throttle upon arming.
Re: Flip 32
I read nothing on the website about backwards wiring, or did mine come with a piece or paper. I bought mine a while ago, so maybe this was before the warning on th bag, mine is loaded with V211? A manual is none existent. So you guys are saying I have to switch positive and negative on the ESC servo...
Flip 32
Trying to learn about baseflight here. I got this board: m So when I power the board through the ESC BEC I get no lights. When I power through the USB I get the lights and everything works in the GUI. I am only using one BEC from a plush 10a. I have 5V from the BEC. I hope the regulator isn't fried ...
- Sat Aug 03, 2013 6:09 am
- Forum: Shields, boards and sensors
- Topic: Nano Brushed Board!
- Replies: 23
- Views: 13875
Re: Nano Brushed Board!
If anyone is still reading this or interested, the hobby king pocket quad has had some interesting versions of multiwii made for it by some members of RC groups and here, which should work great with this board.
- Sat Aug 03, 2013 4:01 am
- Forum: Getting Started - MultiWii config and setup
- Topic: Problems flashing HobbyKing Pocket Quadcopter
- Replies: 2
- Views: 1541
Re: Problems flashing HobbyKing Pocket Quadcopter
Yes there was a bunch of them shipped without bootloaders.
- Tue Jul 30, 2013 5:51 am
- Forum: ESCs, propellers , servos and radios
- Topic: Help on simonk esc calibration on crius aio pro v1.0
- Replies: 8
- Views: 9043
Re: Help on simonk esc calibration on crius aio pro v1.0
That method is over 1 year old before they implimented the #define ESB_CALIB_CANNOT_FLY.
There is no need to do it that way. But it will work.
There is no need to do it that way. But it will work.
- Mon Jul 29, 2013 3:42 am
- Forum: ESCs, propellers , servos and radios
- Topic: Help on simonk esc calibration on crius aio pro v1.0
- Replies: 8
- Views: 9043
Re: Help on simonk esc calibration on crius aio pro v1.0
1. Undefine that comment like you did. 2. Unpower everything and remove props. 3. plug in battery while transmitter is full throttle with transmitter on 4. quickly after hearing a beep, reduce throttle to zero 5. listen for the beeps to notify you of a successful calibration, if not start over. 6. d...
- Mon Jul 29, 2013 3:16 am
- Forum: ESCs, propellers , servos and radios
- Topic: Alternative ESC firmware (reflashing)
- Replies: 640
- Views: 338027
Re: Alternative ESC firmware (reflashing)
Hello, I am interested in flashing some RCX 10A ESC's with the Wii Esc. These are the same as RCTimer, so I believe it will work. In the RApid Esc database, these Esc's have a note saying that the MCU gets corrupt at high currents. Well a bunch of us have been toasting our Esc's and we are trying to...
- Sun Jun 16, 2013 5:13 am
- Forum: Shields, boards and sensors
- Topic: Help connecting a blue tooth adapter
- Replies: 4
- Views: 3820
- Sun Jun 16, 2013 5:12 am
- Forum: Shields, boards and sensors
- Topic: Help connecting a blue tooth adapter
- Replies: 4
- Views: 3820
Re: Help connecting a blue tooth adapter
Thanks you. I got it figured out now. In case anyone is purchasing this same BT adapter, or any other like it, this is the procedure recommended to me by ssaturo on RCGroups. I am waiting for my usb-serial adapter so I can change the baud rate to 115200, I set my config.h file for 9600 on serial com...
- Wed Jun 12, 2013 2:51 am
- Forum: Shields, boards and sensors
- Topic: Help connecting a blue tooth adapter
- Replies: 4
- Views: 3820
Help connecting a blue tooth adapter
I think I have this mostly figured out, but want to run it past people who know more than me before I blow it up. I have this board: m I bought this blue tooth adapter: m So I soldered the pin header in the I2C so I can physically connect the adapter. What next? Do I have to change some code? I am r...