MultiWii

Hi,

here is the link:
http://www.goodluckbuy.com/arduino-seri ... lane-.html
it´s a "wrong" modul it´s a master module.

But I read you can change it with :"AT + ROLE = 0 r n" to slave than it should work

@UndCon Do you have a link there you bought the modul?

Maybe you can change it to slave via a command if its realy a master.
But I´m not shure if this work.

Maybe with:
AT+ROLE=(num), num: "0" for slave, "1" for master

@UndCon if you change the baudrate bevor the name than you have to reconnect with the new baudrate

Do you get a ok on Command AT????

perfect thx

Hi, I searched a solution I think 10 days, yesterday I found the solution, after this I also find the two threads you post, so I could hit me by myself

If you have problems to connect with a pc read here:
viewtopic.php?f=8&t=1055&p=7167&hilit=dll#p7167
Maybe the problem it´s only in windows 7

Hi, we have some problems to connect Multiwii_conf with the Multiwiicopter and a Bluetooth modul with a pc. The Comport of the Modul don´t view and on arduino it also do not work to connect with serialmonitor. We found this thread: m and there was the rxtxserial.dll after replacing this also on mult...

Hallo, I want to connect with my Win7 Machine to the Stick. Over Android it works perfekt, but on win 7 I connect and I see the comport (two)
but I can´t connect.

what can I do??

Is there now a posibility to connect the spectrum satelit to the copter?

I will test this tomorow

no the code works,

but the barometer do not work so good

Is there any posibility to connect one value to a Chanel of the RC over Aux1 or so.C This should give you something to start with. //*********************************************************** uint8_t testVal = map(rcCommand[AUX1],1020,2000,0,20); //Serial.println(testVal); //**********************...

Ah Perfekt I will test this the next time

Is there any posibility to connect one value to a Chanel of the RC over Aux1 or so. So we can change the P or the D or the I over the RC Chanal and not have to connect the Copter to the pc chang it in Gui and restart testing. this costs a much time. That we have a short code which can implementet in...

I have tested this version, but do not work so god. Best is the first version from other thread.

Hi I will test it today your mod

Today I have testet the new dev version.

But the baro don´t work for me.

If I switch it on, the copter falls down.

Best version for me ist this which is here in first post.

Any other tested newest dev?

realy good Idea.

I hope this will implement in the gui

Today I have testet the new dev version.

But the baro don´t work for me.

If I switch it on, the copter falls down.

Best version for me ist this which is here in first post.

Any other tested newest dev?

Today I have testet the new dev version.

But the baro don´t work for me.

If I switch it on, the copter falls down.

Best version for me ist this which is here in first post.

Any other tested newest dev?

do anybody of you testet the new dev from MultiWii_dev20110516.zip there is some new altitude code: #if defined(BMP085) if (baroMode) { int16_t throttleAltitudeAdjust; static int16_t errorAltitudeI; static int16_t lastErrorAltitude; if (abs(rcCommand[THROTTLE]-initialThrottleHold)>20) { baroMode = 0...

Hi, yesterday I have crashed my Quadcopter at to much loopings so one motor is dead. Hey. You still have 3 motors... Rebuild it to a tricopter... no thank you I love my quad But the middle bar is bent very hard so I can directly build a tricopter No I hope the motor will come in some days. But I ha...

Hi,

yesterday I have crashed my Quadcopter at to much loopings so one motor is dead.

But I have orderd a new one yesterday. I hope I will have it for next weekend. Then I will test this dev version.

PatrikE wrote:If throttle is riced to much it will rice rapidly at MAXTHROTTLE.
If throttle is lowered to much it will go to MINTHROTTLE and fall like a stone.( Unwanted Behavior)

Ok but I have the stick on a postion witch on the baro and then the copter falls down.

Not after moving the stick

Hi, today I have tested the first version from here and the second dev version. The first one works preaty good i only have an ampitude abound 1 meter. the dev version don´t work If I switch to altitude mod, the copter falls downl like a stone because the motors are going down with the rpm. My versi...

Hallo PatrikE, today I testet the dev version with your inclution.

But if I switch on the altitude mod, the copter falls down like a stone.

arnaldo wrote:mine is uder arduint that is in a capsule no wind...no light

same as my

Could be where any posibility to combine this this this an acceleromtert, so the copter nows if it is going down. So this will help the barometer to get besser relults. Whis NK or motion plus? What do you mean to combine this. I have also make some changes in the code and implement a average value a...

arnaldo wrote:i tried your mod druckgott, but it doesn't work for me...only one time at high altitude it worked for a while...
what i have to change? what do your values if changed?

By me it also do not work eavry time. Somtimes it work somtimes I gad bad results, I don´t know why

PatrikE wrote:The big problem is the difference in the values.
-3
-3
6
6
6
6
7

Between -3 an 7 is a difference of 1 meter!.

It´s only an example that you see there are comming 2 ore three times the same number

I think another problem is that the barometer works at 400 MHZ, but if you read the values, there are 2- 6 values which are all the same. Example: you get an altitude: (copter standing on the table without running motors) 1 1 1 1 -3 -3 6 6 6 6 7 0 0 . . . so if you use a PID actuator you have the pr...

I have also mad some changes. If you change this paramter you can change the sensibliyty of the barometer: I do not test your code because I have no time. But I have changed the origianl Code m I geht sometimes good results, and sometimes I get bad results (resonance frequency), but I don´t know why.