MultiWii

bulesz

bulesz wrote:Thanks Shikra,

Can you point me to the 1.5pre? I can't find on the MWOSD download page... ??

Many thanks,
B

Ahhááá, I was looking for 1.5pre and not 1.4 pre5...thanks bro, it's downloading now. I will come back with the CF 1.9 related test results.

Cheerz,
B

bulesz

thanks matey!

bulesz

Thanks Shikra,

Can you point me to the 1.5pre? I can't find on the MWOSD download page...

??

Many thanks,
B

bulesz

Guys, I have to double check, but I have just upgrade the FW to the latest pre1.4, set the config.h to CF 1.9, did a clear eprom, then flash the latest FW, restart, in the gui load fonts, restart, setup the in the GUI. In the OSW menu on the field I have not seen the separated roll rate and pitch ra...

bulesz

Ehhe, it seemed my previously downloaded package was not complete...

bulesz

Guys, I feel so noob, but how can I execute the MW_OSD_GUI of the 1.4 ? I can't find the common applications for the windows only some JDE etc files... ?

Thanks and sorry for my noobness...

bulesz

It only supports combined pitch/roll I have to idea how that works with new cleanflight. Hopefully it just means that feature is not there. Realistically its never going to keep up with all option for multiwii/ baseflight / cleanflight and APM when thats released. Not enough memory - or time to do ...

bulesz

Thanks bro! I'm checkin out!

Another question, I'm not sure, does the MW OSD 1.3 support the latest Cleanflight 1.8.0 where there are separated ROLL and PITCH rates?

Many thanks,
B

bulesz

Hey guys,

I have a strange issue:

Using MW OSD 1.3 with full Naze32 + Baseflight.

Everything seems to be fine when disarmed, the voltages, timer, horizon, altitude is working etc...but when armed the hud is frozen! When disarm again, it is working again.

Any idea?

Many thanks,
B

bulesz

Guys, just a quick question: making/having a graphics OSD instead of charset (sprite) based is hardware (MinimOSD) or software limited? For example having a quicker response horizon line... ?

Many thanks,
B

bulesz

Important note for RSSI channel for OpenLRS users:

The BaseFlight value "rssi_aux_channel=4" is = "rssi_channel=8" on the CleanFlight!!!!

And the channel number is limited to 4 in the GUI!!! So you can make it work in the CLI only!

bulesz

Guys,

Could you help me with RTH...which CLI setting sets the "facing to home" ? I mean "turn back and come home" instead just "come home" ...

Cheerz,
B

bulesz

Guys, what is the main difference between the PID controller 1 and PID controller 2? more agile, or more precise? or both?

This would be the main reason of switching from Baseflight...

?

Cheerz,
B

bulesz

That is really instructive ... so I guess we could build a Faraday cage around our FC if we're using an external mag ... and also use a back plane (yours is not grounded but works well) on our GPS ... Thanks ! Take a look at High End class of Flight Controllers. Xaircraft's Super X, will cost you m...

bulesz

Deet wrote:have you got the gui version that matches the sketch version?

Thanks for your reply, yes of coz I could set it up BEFORE the 5V mod...

bulesz

Guys, my MinimOSD is powered from 5V only, all works fine, BUT in the MW_OSD_GUI I can't save the settings when powered and connected with the FTDI... ?

Is there any magic I have missed?

Many thanks,
B

bulesz

I did my first LOS test flight with MW OSD running on a Witespy KV Team Mod OSD and recorded the video on the ground. I noticed several things I'm trying to iron out, but right now I just want to address a couple of the problems I'm noticing. #1: I have a Naze32 Acro and I use a switch on my Tarani...

bulesz

I fly my mini 250, just in testing phase. and after that I will start to build the big light machine...the little 250 will be the mad, and the big 500 class will be the cruiser...

So back on Harakiri, where is our beloved developer? Rob where are you? we miss you Bruder!

bulesz

+1, my next project will be an extra light bird as Kauaiguy did...: m H frame with 3 carbon tubes + 3xxx class 470kv motors with 13 - 14 props on 5S... Why 5S ... 4S are more easily available and cheaper ... 4S vs 5S or 6S ... it will not make any visible efficiency difference ... I'm even question...

bulesz

+1, my next project will be an extra light bird as Kauaiguy did...: http://www.rcgroups.com/forums/showthre ... st29560694

H frame with 3 carbon tubes + 3xxx class 470kv motors with 13 - 14 props on 5S...

bulesz

my next project for Harakiri involves my lightweight unit. I am trying to shave 100 more grams from it, and thats a challenge. right now its at 800g because it has flip32+, 35mm active on Neo6, MinumOSD, 100mw 1.2GHz Video TX, Sony 1/3 cam, OpenLRS, and is 600 in size with CF frame/props 920kv moto...

bulesz

It's a little confusing from just reading the thread, but I have used all of them ( KVOSD, WMOSD, and MinimOSD). I think Harakari detects whether you are using the MW protocol or Mavlink. My biggest issue is getting all the info to show correctly (RSSI, Flight Modes, etc). Thanks mate for the reply...

bulesz

Guys, I'm a lil confused, is the MWOSD working with Harakiri or I have to use MINIMOSD Extra firmware?

Cheerz,
B

bulesz

Hi Guys, I really want to thank Crashpilot and MrFiero (and others too !) for their great work ! Thanks to you, I finally got PH working. Here is a video of one of my OctoX8 flashed with Harakiri with MrFiero settings : m The wind was at least 30 km/h with gusts of 50 +. PH and RTH work very well. ...

bulesz

Thanksmate, I'll give a shot for it...

bulesz

Guys, is the Naze32 Andriod app working with Harakiri?

Or should use the MW OSD instead?

Cheerz,
B

bulesz

.... @Vertigo: I should do a readme on the failsafe. If the internal Failsafe of Harakiri (not speaking of internal FS settings of your receiver here) is triggered it tries the best to do something healthy with the copter depending on available sensors and their status. If GPS becomes unhealthy and...

bulesz

... @Bulesz: Thanks for the BF4 fight on Tuesday! .. Though "lancang dam" ended up in a nasty baseraping session... leaving no chance for them ... that was not very gentleman like....but hey, they would have done the same with us. BTW: I think they hated our supply/engineer/attack heli co...

bulesz

Guys, anyone has experience using and setup Naze32 for X8 octo?

Many thanks,
B

bulesz

@ Bulez: wiki will be updated for 1.2 To access the inbuilt OSD menu, with MultiWii DISARMED: ⋅ THROTTLE MIDDLE ⋅ YAW RIGHT ⋅ PITCH FULL To navigate the OSD: ⋅ PITCH/ROLL sticks are used to navigate ⋅ YAW stick is used to adjust / change values Note...

bulesz

Thanks, but I know how to reach the menu, just not clear how to navigate / edit the values there... ??

Cheerz,
B

bulesz

Guys, what is the ENTER/OK button in the OSD menu? For example when wanted to edit a PID value... ? what are the stick controls?

Many thanks,
B

bulesz

Due to popular demand added align_board_yaw. (See the readme.txt for further description here: m). I don't know how your copters look like but when everything is so cluttered that even the board had to be placed 90 degree off it may be likely that you mag is fu**** up as well. Cheers Rob. yééz, thi...

bulesz

You can get the full version from dronematters.com. They have the full version too and you can pick the color (red/black). Mine was here in EU in less than a week with normal tracking shipping!

bulesz

Great Mr Fiero!

Thanks for sharing us your result! I hardly wait to try it out, but need to wait till the "align_board_yaw" will be implemented. I'm very curious about it, because I plan to use my big bird for making video, so the tight PH will be very handy.

Cheerz,
B

bulesz

Yoman,

Guys I'm stucked. flashed the Harakiri T3_R30, configuring in CLI, but my board is mounted as CW 90 rotated (rotated to right), so in Baseflight it was "align_board_yaw=90". So how can I "say" this in Harakiri?

Many thanks,
B

bulesz

Thanks Mate for your hard work, I could try it out in the weekend with my big bird.

bulesz

OFF: Hohohohoooo! Another Bulldog noob..

I love the Bulldog too in BF4...

very naice weapon for the medic.

what's your nick there? We could hunt together sometime...

bulesz

Many thanks Rob!

The esc_min / max is the min/max throttle?

Just as on the sides: would rename the testcode3 to something "newer", coz beside the testcode4 it is a bit confusing for the newcomers, which one version to pick.

Many thanks,
B

bulesz

Guys, where can I find the latest hex for rev5 board? (I guess it is the Test code 4 aka Summer Games pre 2.6?)
Many thanks,
B

bulesz

Thanks for the info, I will try this hex (currently I'm using the latest from the Baseflight Configurator in the online hex flash tool), and I will try the Harakiri pre 2.6 (for the rev5). As I have red the althold/loiter/RTH is very good with that FW. Has anybody try the HK fw? How about implement ...

bulesz

Thanks guys for the feedback! I will put on HK on my big bird. Why could be when connect to MW gui, that the sensors are not moving? I mean the compass and the quad indicator are not moving... ? I remember something from the MW era...need to REcalibrate the acc and mag?

bulesz

woo nice lil bug...

with the new Cobra 2208 2000kv motors + 6X45 props it will be a truly lethal one..

bulesz

Guys I have two silly questions: 1. why not implement the GPS part of Harakiri to Baseflight and make one FW to better and better.... ? 2. is Harakiri stable enough to use it instead of Baseflight? Sorry, just I'm hesitating whatttodo....currently I'm using the latest Baseflight, but for my big bird...

bulesz

Guys I had this twisting in the ANGLE mode with BARO on. I just did the PID tuning and I have made some pitch/roll stress movements and it was made the twist... Last night I have changed the "acc_lpf_factor" from stock 4 to 100. Now the bird does some strange throttle behaving when in PH (...

bulesz

Yeye...

So my next lesson is playing with the PIDs and the RC and R/P rates...

bulesz

Guys, Do I miss something in the initial settings, or why hovering the same config on 55% with Naze32 and on 45% with APM board??? Many thanks, B Not sure I understand. But I think you are saying that you hover at 55% throttle on Naze32 and 45% throttle on APM? Could be expo, different endpoints, E...

bulesz

yeye, thanks mate for the reply. I have learned a lot in these two days...but it was worth it, my GPS and OSD is working and I have made my first acro movements with my big bird (500 class) so it was nice...

bulesz

Guys, I have figured out! I had to change the serialbaudrate to 57600, and THAT was the problem! I changed back to 115200 and all set!

bulesz

Thanks for the quick reply! I have uploaded the font, and I have got quite similar to the bottom gray image: m So left bottom corner the 0V etc battery stuff, ACRO in the top left, and timer in the bottom right. So I have to do the EPROM clear and repeat the flash+font upload? Many thanks, B #######...

Search found 71 matches