MultiWii

Bamfax wrote:Ah, grats. How does your camstab gimbal look like?

Hi Bamfax,

it´s a simple tilt servo that fits perfectly on my QAV280 Frame.

https://www.thingiverse.com/thing:541991

Thx for your info @Rob, i revert to olderTestcode3, BN-880 (m8n clone) works now fine.. Final results at weekend in the fields ... Not in the fields, only in my little garden ... https://www.youtube.com/watch?v=D8Y6UHsSPUo Next step is to add an servo tilt.. but i have some problems t get it workin...

Thx for your info @Rob, i revert to olderTestcode3, BN-880 (m8n clone) works now fine.. Final results at weekend in the fields ... Not in the fields, only in my little garden ... https://www.youtube.com/watch?v=D8Y6UHsSPUo Next step is to add an servo tilt.. but i have some problems t get it working...

Hi Rob,

nice that you continue working on Harakiri....
Tried your latest Webstore Version, but GPS is not working anymore.. (UBX M8N 38.4K)

Older Versions Testcode3 working fine.. which GUI is preferred?

sorry for dumb questions
Frank

thx Patrik,

i test it first without any second fpu, the trick was to define all flightmodes before flashing with gps code.
I test it and will reply ..

Br
Frank

The Uart senses if you have GPS os FTDI connected. But only one can be used. I2C gps save some code size and you will have Uart free. Hi Patrik, is i2c GPS supported in MW 2.4 and which piece of code will be on the second i2c Arduino? Is it not possible to toggle d13 onboard led after gps fix? BR F...

Hi, I have an Arduino Promini 328 and a GY-86 IMU compiled with GPS functions and have have 400bytes free. But my problem is my 328 has only one rx/tx port, which was shared with ftdi. Is it possible to use ftdi and gps at the same time? If not, any led status when gps is locked in arduino will help...

Hello, i fly a minicopter and when i fly with speed and release the sticks the copter is drifting a long distance. How can i reduce the drifting when i release the sticks in angle mode? Is there a parameter acc brake? My other copter with apm brakes very fast in stable mode and it´s flying very cris...

Hi Dominic, i have your latest hex flashed to my NAze32 Rev3 and want to enable Telemtry, but it´s not working. I have a FRSKY D8R-II RX and enabled RX_PPM/GPS/SOFTSERIAL/TELEMETRY Set´s are frsky_inversion = 1 telemetry_provider = 0 When these Parameters are enabled my GPS lost Signal. I have sold...

Hi Dominic, i have your latest hex flashed to my NAze32 Rev3 and want to enable Telemtry, but it´s not working. I have a FRSKY D8R-II RX and enabled RX_PPM/GPS/SOFTSERIAL/TELEMETRY Set´s are frsky_inversion = 1 telemetry_provider = 0 When these Parameters are enabled my GPS lost Signal. I have solde...

Hi, i fly crashpilot´s latest release, it flies awesome but i wish to enable more braking after stick release. Which parameter causes more acc brake.. (see only GPS_ACC brake). My copter is drifting after stick release and i wish to have less drift after stick release. Hope someone could help me.. T...

Sorry for spam, okay latest release 1379.

BR
Frank

Hi Adrian,

where´s your latest code, or is it not public at the moment?

BR
Frank

Okay, it´s seems not very easily to isolate one channel .. Anyone experience with an isolated aux channel and it´s code? Or better edit subtrims and endpoints in Your radio for this channel. Yes this option seems easier to handle.. i will have a look into my manual of Hitec Flash 5 Transmitter and h...

Hello, after my Channel expansion from 5 to 7 channels, 2 of the 3 way switches working correctly with gauges. (low/mid/high) One 3 way switch can switch only 2 ways. The gauge is too high .. the original switch from transmitter was affected, not the expanded. Is there a way to correct these one swi...