MultiWii 2.5 MUST HAVE:
- OneShot (Multi)
- Air Mode
Search found 36 matches
- Fri Jun 10, 2016 11:28 am
- Forum: Software development
- Topic: MWii development beyond v2.4
- Replies: 73
- Views: 59134
- Mon Dec 30, 2013 2:32 am
- Forum: Software development
- Topic: KV Team Multiwii OSD
- Replies: 1021
- Views: 398242
Re: SW Development on Minim Osd
Hi Marc, I was not aware of that and will look ASAP. I have made many modifications to the switches on GUI and probably something went wrong with that one. Thank you for pointing it. Cheers EDIT: To your Cell question: not at this time in current GUI only the total voltage (I think it is more intui...
- Sat Dec 28, 2013 10:58 pm
- Forum: Software development
- Topic: KV Team Multiwii OSD
- Replies: 1021
- Views: 398242
Re: SW Development on Minim Osd
Hi, I found today a Little Bug in the GUi. After Setting up 4S Battery i can't Set the Alarm to 13,2V. Only 10,5v is possible. On Tv, whith stick setup it is possible to Set the Alarm to 13,2. Probertly we can Set a cell Voltage like 3,3v to configure the Alarm? is it right that the rssi in the ppm ...
- Mon Nov 11, 2013 12:15 pm
- Forum: Software development
- Topic: 2.3 is finally here :)
- Replies: 97
- Views: 106006
Re: 2.3 is finally here :)
Hi,
in my config(32U4-Leonardo, QuadX) i can't compile the Version2.3 with "#define VARIOMETER" without a LCDConfig.
Can anyone check this?
Marc
in my config(32U4-Leonardo, QuadX) i can't compile the Version2.3 with "#define VARIOMETER" without a LCDConfig.
Can anyone check this?
Marc
- Tue Oct 01, 2013 6:13 pm
- Forum: Software development
- Topic: Release v2.3 is coming soon... prepare
- Replies: 96
- Views: 47363
Re: Release v2.3 is coming soon... prepare
Hi,
i tested today 3 Akkus with 1573 on my own PCB.
After new PID Setting (R/P 4.0) YAW D =120 (can this be ok? The Jump at YAW is so mostly ok) and YAWRate =0,5 (before 0,8) the Copter is in a new league
Verry Cool! Thank You...
I think the Flighttime is now longer (subjective-no measurement).
i tested today 3 Akkus with 1573 on my own PCB.
After new PID Setting (R/P 4.0) YAW D =120 (can this be ok? The Jump at YAW is so mostly ok) and YAWRate =0,5 (before 0,8) the Copter is in a new league
Verry Cool! Thank You...
I think the Flighttime is now longer (subjective-no measurement).
- Mon Sep 30, 2013 8:22 pm
- Forum: Software development
- Topic: Release v2.3 is coming soon... prepare
- Replies: 96
- Views: 47363
Re: Release v2.3 is coming soon... prepare
Mis wrote:Start GUI, go to settibgs tab and assign AUX channel for SERVO1 middle position.
OK, that works!
Thanks Mis...
BUT that is definite not intuitive!!!
A minimum is a description near the scalebox.
A Dropbox would be much better.
- Mon Sep 30, 2013 6:30 pm
- Forum: Software development
- Topic: Release v2.3 is coming soon... prepare
- Replies: 96
- Views: 47363
Re: Release v2.3 is coming soon... prepare
In the Config.h the section: /*********************** Cam Stabilisation ***********************/ /* The following lines apply only for a pitch/roll tilt stabilization system. Uncomment the first or second line to activate it */ //#define SERVO_MIX_TILT #define SERVO_TILT Don't work with Poti on Radi...
- Mon Sep 30, 2013 5:04 pm
- Forum: Software development
- Topic: Release v2.3 is coming soon... prepare
- Replies: 96
- Views: 47363
Re: Release v2.3 is coming soon... prepare
in "Config.h" is a little typing error:
#define LCD_TELEMETRY_AUTO_FREQ 1967// to step to next telemetry page 967 <=> 3s
to
#define LCD_TELEMETRY_AUTO_FREQ 967// to step to next telemetry page 967 <=> 3s
#define LCD_TELEMETRY_AUTO_FREQ 1967// to step to next telemetry page 967 <=> 3s
to
#define LCD_TELEMETRY_AUTO_FREQ 967// to step to next telemetry page 967 <=> 3s
- Mon Sep 23, 2013 8:24 pm
- Forum: Software development
- Topic: Release v2.3 is coming soon... prepare
- Replies: 96
- Views: 47363
Re: Release v2.3 is coming soon... prepare
Hi,
Can anybody fix the problem with the fast yaw (gier) before release 2.3 please?
Fast Yaw bring the PID Controler to Run out...
Greetings from Germany,
Marc
Can anybody fix the problem with the fast yaw (gier) before release 2.3 please?
Fast Yaw bring the PID Controler to Run out...
Greetings from Germany,
Marc
- Fri Sep 20, 2013 8:43 pm
- Forum: Software development
- Topic: Release v2.3 is coming soon... prepare
- Replies: 96
- Views: 47363
Re: Release v2.3 is coming soon... prepare
subaru4wd wrote:GPS Navigation should not hold up valuable releases. There's some good stuff in 2.3 that I think needs to be mainstream. Maybe 2.3.1 can have GPS navigation, but there's quite a few of us who could care less about waypoints.
+1
- Thu May 23, 2013 11:23 am
- Forum: Software development
- Topic: List of problems in Version2.2
- Replies: 58
- Views: 20970
Re: List of problems in Version2.2
List of Problems: ------------------- 1. WMP with Gyrofailsavecalibration dosen't work. FIX: In the Sensors.ino at "if(abs(imu.gyroADC[axis] - previousGyroADC[axis]) > 8) tilt=1;" we must have a "If define WMP..." Question or the Value goes from 8 up to 20. 2. With 32U4 the Seria...
- Thu May 16, 2013 11:11 am
- Forum: Software development
- Topic: List of problems in Version2.2
- Replies: 58
- Views: 20970
Re: List of problems in Version2.2
List of Problems: ------------------- 1. WMP with Gyrofailsavecalibration dosen't work. FIX: In the Sensors.ino at "if(abs(imu.gyroADC[axis] - previousGyroADC[axis]) > 8) tilt=1;" we must have a "If define WMP..." Question or the Value goes from 8 up to 20. 2. With 32U4 the Seria...
- Sun May 05, 2013 8:03 pm
- Forum: Software development
- Topic: List of problems in Version2.2
- Replies: 58
- Views: 20970
Re: List of problems in Version2.2
List of Problems: ------------------- 1. WMP with Gyrofailsavecalibration dosen't work. FIX: In the Sensors.ino at "if(abs(imu.gyroADC[axis] - previousGyroADC[axis]) > 8) tilt=1;" we must have a "If define WMP..." Question or the Value goes from 8 up to 20. 2. With 32U4 the Seria...
- Fri May 03, 2013 11:12 am
- Forum: Software development
- Topic: List of problems in Version2.2
- Replies: 58
- Views: 20970
Re: List of problems in Version2.2
List of Problems: ------------------- 1. WMP with Gyrofailsavecalibration dosen't work. FIX: In the Sensors.ino at "if(abs(imu.gyroADC[axis] - previousGyroADC[axis]) > 8) tilt=1;" we must have a "If define WMP..." Question or the Value goes from 8 up to 20. 2. With 32U4 the Seria...
- Fri Apr 19, 2013 11:18 am
- Forum: Software development
- Topic: List of problems in Version2.2
- Replies: 58
- Views: 20970
Re: List of problems in Version2.2
By my self, the board won't start (boot) after connect the Lipo.
Sometimes boot, sometimes dosen't boot (1/5).
Without the SEI() the Board evertime boot up right.
The Thread out of the FPV-Forum Post#101:
http://fpv-community.de/showthread.php? ... -da!/page3
Sometimes boot, sometimes dosen't boot (1/5).
Without the SEI() the Board evertime boot up right.
The Thread out of the FPV-Forum Post#101:
http://fpv-community.de/showthread.php? ... -da!/page3
- Thu Apr 18, 2013 11:21 am
- Forum: Software development
- Topic: List of problems in Version2.2
- Replies: 58
- Views: 20970
Re: List of problems in Version2.2
List of Problems: ------------------- 1. WMP with Gyrofailsavecalibration dosen't work. FIX: In the Sensors.ino at "if(abs(imu.gyroADC[axis] - previousGyroADC[axis]) > 8) tilt=1;" we must have a "If define WMP..." Question or the Value goes from 8 up to 20. 2. With 32U4 the Seria...
- Thu Apr 18, 2013 11:14 am
- Forum: Software development
- Topic: List of problems in Version2.2
- Replies: 58
- Views: 20970
Re: List of problems in Version2.2
I teste with the very shortest Stick input what i can do;-)
After aprox. 4-5 sec. after "Save and Exit" the LCD-Config restart again.
I have a Jeti PPM RX. Is it to fast?
Can anyone build a delay after signal to Save and exit? With a Tag, like a Button debouncing.
After aprox. 4-5 sec. after "Save and Exit" the LCD-Config restart again.
I have a Jeti PPM RX. Is it to fast?
Can anyone build a delay after signal to Save and exit? With a Tag, like a Button debouncing.
- Tue Apr 16, 2013 5:57 pm
- Forum: Software development
- Topic: List of problems in Version2.2
- Replies: 58
- Views: 20970
Re: List of problems in Version2.2
Another Problems: With the 32u4 it dosen't work a lcd3w with serial1. With the 32u4 the crius OLED i2c Display starts after the Save and exit command via sticks every Time the LCD config Mode again. So i can not exit the LCD config. I Thing ist is a issues with the Serialport. But i don't can solve ...
- Tue Apr 16, 2013 5:48 pm
- Forum: Software development
- Topic: List of problems in Version2.2
- Replies: 58
- Views: 20970
Re: List of problems in Version2.2
Ok, 16 is not working. 18 is working and 20 works fine too.
So we have fix the Problem.
In 2.3 we must take a "if define wmp...." or we change the value 8 up To 20.
So we have fix the Problem.
In 2.3 we must take a "if define wmp...." or we change the value 8 up To 20.
- Tue Apr 16, 2013 11:21 am
- Forum: Software development
- Topic: List of problems in Version2.2
- Replies: 58
- Views: 20970
List of problems in Version2.2
Hi, i found another problem in Version2.2. Please fill this List with your problems too. So we can help Alex and the Team to change this in next Version. It gives a problem with the GYROFAILSAVECALIBRATION. When i use a WMP the Gyros initial in endless loop. Effect: no calibration end, Status LED bl...
- Tue Apr 09, 2013 8:29 pm
- Forum: Software development
- Topic: MultiWii roadmap for 2.3
- Replies: 62
- Views: 22149
Re: MultiWii roadmap for 2.3
I Wisch also for 2.3 that the oled connect on 32u4 don't restart after "Save and exit".
After Save and exit the oled restart the setup mode and so you can not really exit the setup. (Crius V1.0)
After Save and exit the oled restart the setup mode and so you can not really exit the setup. (Crius V1.0)
- Mon Apr 08, 2013 5:22 pm
- Forum: Software development
- Topic: MultiWii roadmap for 2.3
- Replies: 62
- Views: 22149
Re: MultiWii roadmap for 2.3
Ok, then i wish also a JETI telemetrie.
- Mon Apr 08, 2013 3:18 pm
- Forum: Software development
- Topic: MultiWii roadmap for 2.3
- Replies: 62
- Views: 22149
Re: MultiWii roadmap for 2.3
I wish in Version 2.3 to change the Vbat Alarm warning values in the multiwii conf GUI.
And i wish that the 3wserial LCD on the 32u4 on serial1 works.
Marc
And i wish that the 3wserial LCD on the 32u4 on serial1 works.
Marc
- Thu Apr 04, 2013 11:35 am
- Forum: Software development
- Topic: Multiwii 2.2 hangs when using FrSKY serialsum receiver
- Replies: 26
- Views: 10881
Re: Multiwii 2.2 hangs when using FrSKY serialsum receiver
I have the same Problem.
With my PPM JETI RX (12x) and comment "sei()" the 32u4 dosent boot any time.
with uncomment "//sei()" is everthing OK!
Marc
With my PPM JETI RX (12x) and comment "sei()" the 32u4 dosent boot any time.
with uncomment "//sei()" is everthing OK!
Marc
- Sat Mar 30, 2013 10:40 pm
- Forum: Software development
- Topic: Problems with vbat
- Replies: 21
- Views: 7597
Re: Problems with vbat
Hi, sorry....
I saw it now
Thanks.
But this is very inconvenient.
Alex wrote, he bring the Option to the GUI. That is ver usefull.
Marc
I saw it now
Thanks.
But this is very inconvenient.
Alex wrote, he bring the Option to the GUI. That is ver usefull.
Marc
- Sat Mar 30, 2013 8:14 pm
- Forum: Software development
- Topic: Problems with vbat
- Replies: 21
- Views: 7597
Re: Problems with vbat
it is a general Problem with the code! I have also a Problem with VBAT. In Version 2.1 is everthing ok. I checked this on 4 systems. I have the warning at 10,1V and a critical alarm on 9,9V. When i change the Values to 11,5v (115) it takes no effect. I dont can change the Value with effect. I think,...
- Wed Mar 27, 2013 12:22 pm
- Forum: Software development
- Topic: Patch: LED Flasher
- Replies: 35
- Views: 19098
Re: Patch: LED Flasher
You can toggle this in the GUI. (Only when the Flasher is active in the Sketch!)
- Mon Mar 11, 2013 8:20 pm
- Forum: Software development
- Topic: MultiWii 2.2 is released
- Replies: 84
- Views: 61861
Re: MultiWii 2.2 is released
OK sir..... We have three Problems! (32U4) 1. When i undefine LEDFlasher the function from the LED to calibrate the MAG (Blinking led) is not available. Also the function from the led to indicate the Stable Copter (When turn the copter to the Side the LED lights on). When i define the LEDFlasher the...
- Sun Mar 10, 2013 10:25 pm
- Forum: Software development
- Topic: MultiWii 2.2 is released
- Replies: 84
- Views: 61861
Re: MultiWii 2.2 is released
I thing, when i define 32u4ALLPINS i dont need define BUZZERD8.
But the Buzzer is only on D8 when you activate booth: 32u4ALLpins and define BUZZERD8.
But, the new Version is a big step forward!
Thank you.
But the Buzzer is only on D8 when you activate booth: 32u4ALLpins and define BUZZERD8.
But, the new Version is a big step forward!
Thank you.
- Fri Mar 08, 2013 12:17 pm
- Forum: Software development
- Topic: Release 2.2 is coming
- Replies: 167
- Views: 59613
Re: Release 2.2 is coming: MINCHECK change?
about the fact "So we have many users they lost the Copter by flying" I suppose you mean you can disarm the copter in flight with min throttle+yaw left or min throttle+roll left, and the 100 deadband seems high. It was already debated a long time ago, and it was the reason why ARM BOX was...
- Wed Mar 06, 2013 12:27 pm
- Forum: Software development
- Topic: Release 2.2 is coming
- Replies: 167
- Views: 59613
Re: Release 2.2 is coming
it's not the wish thread Sorry but anyway: 2) yes, probably in the version after Many thanks in advance! 1) If the default 1150 is enough to make the copter fly, there is a serious problem about the motor/propeller choice. config.h is here to let you change what you want. I am referring not the #de...
- Tue Mar 05, 2013 12:49 pm
- Forum: Software development
- Topic: Release 2.2 is coming
- Replies: 167
- Views: 59613
Re: Release 2.2 is coming
I have two wishes: 1. Can we set the default value for #define MINCHECK from 1100 to 1030? The Deadband from 100 is very big. So we have many users they lost the Copter by flying, when the Throttlestick is near down! I fly since 1.8 with #define MINCHECK 1030 and it is very good to fly. 2. Can anyon...
- Mon Feb 25, 2013 12:31 pm
- Forum: Software development
- Topic: Release 2.2 is coming
- Replies: 167
- Views: 59613
Re: Release 2.2 is coming
Stars112 wrote: IS the SERIAL3W LCD in Work with the 32u4? In one of the first DEVS (1317) it dosent work. It should work, with serial signal on PIN 4 according to the code. Thanks Alex for your answer. But... The Pin4 is the D+ Pin from USB (Serial0). And in most configuration connect with USB. Ca...
- Fri Feb 22, 2013 12:23 pm
- Forum: Software development
- Topic: Release 2.2 is coming
- Replies: 167
- Views: 59613
Re: Release 2.2 is coming
IS the SERIAL3W LCD in Work with the 32u4?
In one of the first DEVS (1317) it dosent work.
In one of the first DEVS (1317) it dosent work.
- Fri Feb 08, 2013 11:09 pm
- Forum: Software development
- Topic: CRIUS LCD and Multiwii 2.1 on CRIUS SE
- Replies: 1
- Views: 1083
Re: CRIUS LCD and Multiwii 2.1 on CRIUS SE
I have the crius i2c oled too.
With MWC 2.1 is everthing ok.
Edit: sorry i am fail LCD/oled
With MWC 2.1 is everthing ok.
Edit: sorry i am fail LCD/oled
- Wed Jan 30, 2013 9:35 pm
- Forum: Software development
- Topic: Serial3w LCD dont work in 32u4
- Replies: 0
- Views: 649
Serial3w LCD dont work in 32u4
Hi!
Can anybody help me to use the serial3w LCD on a 32u4 Serial1 in r1317?
It doesn't work with me
Greetings, Marc
Can anybody help me to use the serial3w LCD on a 32u4 Serial1 in r1317?
It doesn't work with me
Greetings, Marc