MultiWii

Is there any way of using camstab on a different pin? I am running a hexa and would like to use pitch camstab as well. Is there a way when enabling camstab to retain motor location and move the output of camstab to another pin?

I agree with the green board failure. I just tried with mine and it also now flashes blue to red after using the latest cleanflight.

Mac osd GUI doesn't seem to work. I've tried both downloads (current and old version) and both of them say they are damaged and needs to be trashed. Any idea how to fix this?

I would like to know how you go about adding more options to the osd in the menu area. the Naze32 boards have a really cool option called tpabreakpoint and I would like to edit that when on the field. How would you go about edit the firmware so this will show on the 2nd page?

I have a witespy board and I have updated to the latest 2.2 I would like to put the current sensor data and I do have a 100amp TBS current sensor. I believe I can connect this to the board. It does have three wires (grn,+ve,sig) Since I am pulling the voltage from the naze32 board what do I have to ...

Is there anyway to add a current sensor (tbs 100amp) to a naze acro and minimosd (kvosd board)?

I have some kypom battery that hold there voltage right to the end. It means watching the volts isn't very effective.

I have tried the latest and it still get yaw shift. I still find the update before the yaw to 32bit is much better.

Has anyone else noticed that yaw drifts a lot more since the r396 to r428 update. When using the r428 update (since the yaw 32 bit fix) the yaw seems to pull to the left on all three of my quads. I went back to the r396 and it is much stronger locked in. Anyone having this?

My FC is hard mounted but vibration I am getting. It's not helping that the quad is completely unstable. My other quads on baseflight are smooth.

It is the white board with the latest firmware. I did try cc3d port firmware on it and it did the same thing .... and since I had 2 other quads with naze32 on them (green full and a blue arco) I ditched the cc3d experiment and loaded baseflight back on. But sadly that didn't fix it. In level mode it...

It is the white board with the latest firmware. I did try cc3d port firmware on it and it did the same thing .... and since I had 2 other quads with naze32 on them (green full and a blue arco) I ditched the cc3d experiment and loaded baseflight back on. But sadly that didn't fix it. In level mode it...

I am having a hell of a time with one of my quads. I am using the naze32 acro (white) and the damn thing keeps self leveling slowly. It won't hold angle in rate (yes it is in rate). I'm using f30a flashed esc, tiger motors 1100kv on chatch's asd 400q quad. It's flying like a pile of crap. For some r...

is the abusemark website down? I can seem to get to the page or a direct link to the manual.

I'm having issues connecting this to a mac. The app starts but I can't connect. no new option comes up even after refreshing. I tried with bluetooth that works through multiwii and that didn't come up either. Any idea what I need to do?

Thanks guys. I do have a blue board as well ..... well the arco cause I never use baro, mag or all the other stuff. I just need gyro for flying ... the rest is just to fancy for my needs. Which of those two boards has the better FC? I haven't used the naze32 acro yet. I have already set looptime to ...

I need some help to understand how I go about knocking out the small shakes I am getting. I am not sure what I should be changing but I am getting the feeling it has something to do with the filtering as I have played with the PID's until the cows come home and the small little shakes just won't dis...

well I will give it a try .... that is if I can find out how to update firmware with a mac. It's my only machine with bluetooth build in. I have no problem talking with the cli so I can get the computer and the board communicating.

most likely a no answer but if I don't ask I don't know.

Can you update the firmware through the bluetooth module? I have sunk the board into the quad and can only reach it now through bluetooth.

I know it can be changed by the cli ... If I could plug in my board but I built my current quad with the board sealed within the body (it's a battle style, all weather quad). This means I can't plug it in by usb. I do have access through bluetooth but for the life of me I have no idea how to access ...

I am having a hell of a time find the looptime variable. I'm using the lastest version of baseflight and the naze32 android app. I thought it would be under sets in the cli but I can't find it in there. I want to improve the level of my quad and from what I understand I need to increase looptime. Is...