Search found 115 matches
- Sun Aug 19, 2012 2:31 pm
- Forum: Software development
- Topic: crazy.. what to do?
- Replies: 15
- Views: 4751
Re: crazy.. what to do?
There is no configuration line specific for the Sparkfun 6DOF you need to enable the GYRO + ACC in separate bellow. Like you had in the config.h file you've shared before. (not sure why you mention BOB's 6DOF as it is a different thing) See if the board is properly generating the 3.3v on the pin whe...
- Sat Aug 18, 2012 9:55 pm
- Forum: Software development
- Topic: crazy.. what to do?
- Replies: 15
- Views: 4751
Re: crazy.. what to do?
I'd still insist in the pics of the mounted board.
For example to have the 3.3v on that board you need to have installed the extra components (C2 & VR).
By default it only allows to feed 5v to the sensors (or the 4.5v from D12)
For example to have the 3.3v on that board you need to have installed the extra components (C2 & VR).
By default it only allows to feed 5v to the sensors (or the 4.5v from D12)
- Sat Aug 18, 2012 1:41 am
- Forum: Software development
- Topic: crazy.. what to do?
- Replies: 15
- Views: 4751
Re: crazy.. what to do?
I'd even say that before going any further. Post a photo of your MWC board and the Sensors.
- Mon Aug 13, 2012 8:56 pm
- Forum: Software development
- Topic: MultiWii Ground Station? In the pipeline?
- Replies: 3
- Views: 1498
Re: MultiWii Ground Station? In the pipeline?
Search around, I recall seeing something mentioning that was doing a conversion app to allow to link to the QGroundControll software.
IT basically generates a mavlink feed to it.
IT basically generates a mavlink feed to it.
- Fri Aug 10, 2012 8:38 pm
- Forum: Software development
- Topic: New RCtimer GPS Ublox Neo 6M fails to perform on Mega boards
- Replies: 152
- Views: 107017
Re: New RCtimer GPS Ublox Neo 6M fails to perform on Mega bo
Are you using this and have the ublox with the pins 13,14 and 15 soldered? I changed the I2C sketch to perform the same and so far the only remaining issue is the damm GPS not starting at first try. Hi iceWind. I only have pins 13 & 14 soldered together. Pin 15 remains unchanged. My GPS is a Ne...
- Fri Aug 10, 2012 7:56 pm
- Forum: Software development
- Topic: New RCtimer GPS Ublox Neo 6M fails to perform on Mega boards
- Replies: 152
- Views: 107017
Re: New RCtimer GPS Ublox Neo 6M fails to perform on Mega bo
For those who would like to test using UBLOX Neo 6m at 115200/10hz, here the GPS.ino attachment file modified As my Neo 6m gps seems supporting this rate, let's have a try from you side if you wish The GPS.ino was modified to scan 115200 as well during the the GPS init phase to setup the binary mod...
- Mon Aug 06, 2012 12:55 am
- Forum: Software development
- Topic: New RCtimer GPS Ublox Neo 6M fails to perform on Mega boards
- Replies: 152
- Views: 107017
Re: New RCtimer GPS Ublox Neo 6M fails to perform on Mega bo
Does the soldering of the pins 13/14/... is needed to get the GPS to boot at first try? So far the main issue for me hasn't been the fact of loosing the settings but rather the fact that it doesn't start/work at first try. Sometimes I need to power it off a few times until I get it to work. When it ...
- Sun Jul 08, 2012 12:39 pm
- Forum: Software development
- Topic: Saving/Importing PID configuration
- Replies: 12
- Views: 4452
Re: Saving/Importing PID configuration
Have you guys reached an agreement in regards to the format?
I'm updating the Android app and I would like to make it use the same as well for the sake of compatibility.
So far I was using a binary format but is no bother to change it to XML.
Thanks.
I'm updating the Android app and I would like to make it use the same as well for the sake of compatibility.
So far I was using a binary format but is no bother to change it to XML.
Thanks.
- Thu May 05, 2011 11:44 pm
- Forum: Software development
- Topic: BMP085
- Replies: 43
- Views: 14360
Re: BMP085
Currently my FTDI device is acting weird so I can't program the arduino and test this. But one of the things I wanted to try was to prevent the temperature to be read on each cycle. Some of the comments I've read is that it's readings aren't smooth and it has noise causing/inflating the results when...
- Thu May 05, 2011 9:43 pm
- Forum: Software development
- Topic: V 1.7 Tri-Bug?
- Replies: 2
- Views: 1571
Re: V 1.7 Tri-Bug?
The tri code include a extra arming process that uses the roll stick.
It has been reported before by someone to whom it happened simillar problem.
During a loop or a flip he dropped the throtle too low and had the roll stick to one side... the board disarmed
and the copter felt like a rock.
It has been reported before by someone to whom it happened simillar problem.
During a loop or a flip he dropped the throtle too low and had the roll stick to one side... the board disarmed
and the copter felt like a rock.
- Thu May 05, 2011 10:41 am
- Forum: Ideas
- Topic: android remote configuration app
- Replies: 22
- Views: 8727
Re: android remote configuration app
Finnally I recovered my password (again)
Here it goes: http://www.rcgroups.com/forums/showthread.php?t=1428641
APK shared with some users for initial testing.
Here it goes: http://www.rcgroups.com/forums/showthread.php?t=1428641
APK shared with some users for initial testing.
- Fri Apr 15, 2011 3:30 pm
- Forum: Ideas
- Topic: android remote configuration app
- Replies: 22
- Views: 8727
Re: android remote configuration app
Some updates. Some issues caused some delays on the development. - Not much free time. - Waiting for final version 1.7 to get a final data stream to work with. - Waiting for the BT module ( http://wbb.multiwii.com/viewtopic.php?f=6&t=133#p519) So I'm back in action, I already updated the data pa...
- Sat Mar 26, 2011 2:55 am
- Forum: Ideas
- Topic: android remote configuration app
- Replies: 22
- Views: 8727
Re: android remote configuration app
Hi maxic31,
I might add some more advanced graphs in it later but for now the main goal
is to have a portable configuration tool.
I might add some more advanced graphs in it later but for now the main goal
is to have a portable configuration tool.
- Fri Mar 25, 2011 2:26 am
- Forum: Ideas
- Topic: Ongoing Ideas
- Replies: 7
- Views: 3809
Re: Ongoing Ideas
That can be a interesting idea specially for FPV.
For acro mode it would totally messed the usage.
For acro mode it would totally messed the usage.
- Fri Mar 25, 2011 2:13 am
- Forum: Ideas
- Topic: android remote configuration app
- Replies: 22
- Views: 8727
Re: android remote configuration app
Hey,
I already have a working app, but with a new version coming out it's better to wait to have it compatible with that.
When that is done I'll post it on the market to allow to auto-updates and so on...
If there are any features you guys would like to see implemented just list them here.
Thanks
I already have a working app, but with a new version coming out it's better to wait to have it compatible with that.
When that is done I'll post it on the market to allow to auto-updates and so on...
If there are any features you guys would like to see implemented just list them here.
Thanks