MultiWii

subaru4wd

HI, I would like to know if I can use this firmware on a Witespy micro board or minimOSD board on a fixed wings plane with the pixhawk? Not yet. Is planned for the future but no date.. If we could use MWOSD with APM/PX4 someday that would be awesome!! RSSI and battery voltage monitoring with an APM...

subaru4wd

While flying with MWOSD 1.3 and Cleanflight i realized my OSD compass is always pointed north no matter what. But whats odd, is when I am upside down my compass shows I am traveling South!?!

subaru4wd

Ok this one has been stumping me for hours, and I have tried all I can think of. My last resort is to ask here for the advice of others. Im at my wits end here. Im hoping its something simple I am overlooking. I can't imagine what. Okay, scratch all that. Somebody pointed me to the new GUI for v1.2...

subaru4wd

Debogus wrote:My latest is a kv witespy mimimosd w/ 1.2 mwosd ,,,everything's working great....But I cant access the stick programing...What obvious thing did I miss....

Check and make sure you dont have low rates programmed on your transmitter. MWOSD needs to see full stick movement.

subaru4wd

Ok this one has been stumping me for hours, and I have tried all I can think of. My last resort is to ask here for the advice of others. I have taken a break from MWOSD and Baseflight/MultiWii and have been using APM, with the MinimOSD-extra firmware... fonts... etc. Im getting ready to put a OSD an...

subaru4wd

Im having this exact same issue with several different bluetooth modules. I can pair and connect just fine using the EZGUI app, but immediately get No Data errors. Ive verified TX > RX and even swapped and made TX > TX to troubleshoot. No matter what, the moment I connect to the BT with my phone, th...

subaru4wd

Mr-Fiero wrote:
Spotter6 wrote:I dont know where I got this, to give credit, but here is a diagram for connections to FLIP32+. Whoever made this diagram, Thank You! I use it all the time.

Credit goes to Truglodite. He's the one who created that wiring diagram

subaru4wd

shikra wrote:Bugfix: removed option to exit OSD menu with low throttle. Conflicts with RSSI

THANK YOU!!!

subaru4wd

Hi, I just installed my second MWOSD (kv from witespy hardware) on a 1s copter. I'm trying to read the voltage with the osd bat2 port (because bat1 is video for some reason ) and it's giving me 1.9 volts. I left everything default on the voltage tab except for testing between 3 cells and 1 cell. Th...

subaru4wd

I'm really new to this and might make a fool of myself here. Firstly I have a naze32 and a naze acro. Wanted Gps for my hex with the naze32 then came across Harakiri. Couldn't seem to really get much info on how to flash it or to get it running. Then came across cleanflight and I have to say, it wa...

subaru4wd

Thanks for your work, shikra ! i use it with Naze32/Baseflight with UBLOX GPS and MinimOSD Hardware, works great ! only the ARMED/DISARMED display is not working - even with BASEFLIGHT definition compiled - so i removed_it /comment_out for now make sure you have Telemetry disabled in Baseflight, th...

subaru4wd

Guys I have two silly questions: 1. why not implement the GPS part of Harakiri to Baseflight and make one FW to better and better.... ? yeah right. Go read what Timecop thinks about GPS functions, and how he treats others who try to contribute to his Baseflight. 2. is Harakiri stable enough to use ...

subaru4wd

My experience with the Flip32+ has been very positive so far - for my use the only thing missing is a built in inverter for the FrSky telemetry output. Really like having the +5V and GND next to the IO ports and RC inputs. My wiring for the Flip32+ was much tidier than on the Naze32 which has head ...

subaru4wd

in config.h

find the line: MINTHROTTLE

reduce the number and it should take care of your problem.

subaru4wd

delray wrote:
subaru4wd wrote:Do a throttle range calibration on each ESC using the receiver, not the multiwii controller.

Im using dji opto escs and i dont think they support or require calibration. Something is keeping the motors from providing full thrust.

You should not have used DJI esc's.

subaru4wd

Do a throttle range calibration on each ESC using the receiver, not the multiwii controller.

subaru4wd

Hey guys - just a quick question for the experts. I have been using the KK FC's for a while with varying results. I had a HK Multiwii Pro board and have just started playing with that FC - again with varying results. Everyone I see raves about the Naze32 and I will order one shortly however for the...

subaru4wd

@subaru / trug Here is a packaged version to try with the new witespy boards with config.h option preset. Also untested FASTPWM support for the RX units out there with high frequency refresh rates. If you guys use that would love to have it tested / verified m This is the WiteSpy version. It has so...

subaru4wd

Do you have the most up to date Baseflight firmware?

Try uncommenting #DEFINE BOXNAMES which will make the OSD compatible with older MSP. That is typically what causes the problem you are encountering.

subaru4wd

here's a guide I wrote on flashing new firmware to the Flip32 board:
http://oddcopter.com/installing-firmwar ... ght-board/

subaru4wd

Again it came loaded from READYFLY Wait what, you're bitching about something from clonespy not working? No surprise there. Maybe you shoulda started your post with that bit of information. Timecop, why so snippy whats wrong with Readyfly? is this not a forum where people are to try and help others...

subaru4wd

Forget about Deadlines.

Forget about Cost.

Forget about MultiWii for full Autonomous flight.

subaru4wd

Yes its the 328 chip.

I have my "good" witespy board on the bench right now not being used. I am waiting for some information from Truglodite and then I will use my meter to check resistances and compare them against his.

subaru4wd

I have an older witespy board that works great. All voltages read correctly, RSSI everything. I have a new witespy board I got this year and it too has the same problem Truglodite (and others) are having. Using the same code, same config, and same setup both battery voltages are almost 3 volts off, ...

subaru4wd

timecop wrote:
If it was flashed with "Sunday firmware" then it was a radio issue.

You cannot say that with 100% certainty.

subaru4wd

What radio system was he using? What version of the firmware? Was he using the Naze 32 failsafe or the receiver failsafe? Had either been tested? Lots of possibilities without more info. whatever firmware version the chrome app was set to flash on Sunday. No failsafe is set in Baseflight, this is a...

subaru4wd

I saw a mini quad with the latest baseflight available fly away on Sunday. The pilot armed the quad and gave it throttle... it took off and banked to the left and kept flying perfectly level, left, until it struck a rock. The entire time, the pilot had his throttle stick in the DISARM position. Soun...

subaru4wd

If you are so unhappy... quit Timecop.

Nobody here is twisting your arm or forcing you to do what you do.

Just stop. Stop today, go on vacation.

dont come back.

subaru4wd

And what exactly would you know about kindness?

subaru4wd

Im not a developer by any means. Im out of my league here by far. I am just an end-user who is expecting results. If you were to ask me, ALL code is a cluster fuck and makes absolutely no sense. Apparently, the only code worth running... is the code that comes from TimeCop. His shit must be so clean...

subaru4wd

Just for the record, nobody really gives a fuck what you think Timecop. HUUUUUGE thanks to Dominic for releasing this code and doing his best to help out the 32 bit community. We need more dev's like this, and less devs like TimeCop! Exactly! We need more fragmentation and less developers actually ...

subaru4wd

Just for the record, I do not approve of the direction, file structure, or overall attitude of this particular fork, and specifically the waste of developer time that will ensue from this silliness. Just for the record, nobody really gives a fuck what you think Timecop. HUUUUUGE thanks to Dominic f...

subaru4wd

Not sure why you would power your board with both a BEC & the FTDI????

I powered the board using just my FTDI controller, set at 5v... and flashed it just fine.

subaru4wd

set MinCommand to 900

subaru4wd

tested and working very well, good job. i do have a question about the altitude, where does minimosd pull the altitude from? mine does not seem to display correctly, although it starts at 0 when i plug the battery in, when i take off alt starts to fluctuate and when i land osd shows anything from -...

subaru4wd

http://pastebin.com/

subaru4wd

HFMan wrote:I'm getting a http 403 error trying to download R1.1- is there a permission problem on the web server?

I just tried and was able to download it.

subaru4wd

Im setting up an AfroMini for my FPV Plane. Im not sure exactly what servo's go where? It is a 3 channel plane, and I assume the motor ESC goes on THR, but i have two servo's for the Ailerons and one for Elevator and i am not sure which S pins to use for which.

subaru4wd

Can you try the latest 1.1 in downloads It compiles for me - but no idea if it works as not used that Unless its a conflict with something else enabled in config. I ran R1.1 on my OSD today. It compiled just fine but unfortunately I had a bad wreck on Saturday and fried my Flip32 board. I can't tes...

subaru4wd

shikra wrote:Can you try the latest 1.1 in downloads

It compiles for me - but no idea if it works as not used that
Unless its a conflict with something else enabled in config.

sure thing. i will give it a try tonight or tomorrow.

subaru4wd

Hey Shikra. I tried using your latest beta code with Harakiri. Harakiri requires the Boxnames like 2.0/2.1... but when I enabled BoxNames in config.h, your code failed to compile.

Not sure what the deal was, i should have copied the error and pasted it here. Instead I just installed Baseflight.

subaru4wd

yeah i dont fly with my mag enabled, and yesterday was my first flight with some new motors. I have a lot of tuning left to do, so i will report back once thats done. It was just the only complaint i had after a 7hr day of FPV

subaru4wd

So today I got to fly a FULL day (7+ hours) of nothing but Quad FPV. I got to iron out a ton of bugs with my setup, and things were flying smooth. I am using Harakiri TestCode3 and I noticed when flying in pure manual mode... i would be cruising in a straight line hands off the sticks. Fast forward ...

subaru4wd

Wow there are some great ideas in here!

I esepcially love the Failsafe information being sent to the OSD.

Hope to see some of these features in Harakiri soon

subaru4wd

Also, which set of TX/RX pins? I'm using serial port with included 5V and GND (thru holes) since the other ones are AFAIK not 5V tolerant And it will work with any 3.3 or 5V FDTI. I'm using SparkFun's one (meant for Arduino) and that one has 5 or 3.3V jumper/pads on the bottom (those change VCC and...

subaru4wd

Also, which set of TX/RX pins?

subaru4wd

I was not aware voltage traveled thru the TX/RX pins. Guess you learn something new every day.

If I set my FTDI from 5v to 3.3v does that also change the voltage of the RX/TX pins?

But now im getting conflicting information.... Where is timecop?

subaru4wd

fiendie wrote:How about, you know, Rx and Tx...?

So no DTR is needed?

Also, there are two TX & RX pins/pads. Which ones do I use? The website says i need a USB> 3.3 serial cable. But the board accepts up to 16v?? so, i assume a 5v FTDI will be fine?

subaru4wd

So, i got me a couple of these cool AfroMini Naze32 boards.

I am looking in the manual, but nowhere does it mention where the FTDI connects. Can I use FTDI to flash this board, or what do I need?

subaru4wd

I flashed TestCode3 today and letting the quad sit for a few minutes outisde, I finally got a GPS lock.

Tracking 10 sats in my house. I might get a chance to do some test hovers in the front yard soon.

Search found 316 matches