Search found 316 matches

by subaru4wd
Sat Apr 04, 2015 8:37 pm
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 872
Views: 122609

Re: MultiWii OSD - MWOSD

HI, I would like to know if I can use this firmware on a Witespy micro board or minimOSD board on a fixed wings plane with the pixhawk? Not yet. Is planned for the future but no date.. If we could use MWOSD with APM/PX4 someday that would be awesome!! RSSI and battery voltage monitoring with an APM...
by subaru4wd
Sun Mar 22, 2015 3:03 am
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 872
Views: 122609

Re: MultiWii OSD - MWOSD

While flying with MWOSD 1.3 and Cleanflight i realized my OSD compass is always pointed north no matter what. But whats odd, is when I am upside down my compass shows I am traveling South!?!
by subaru4wd
Wed Dec 17, 2014 9:31 am
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 872
Views: 122609

Re: MultiWii OSD - MWOSD

Ok this one has been stumping me for hours, and I have tried all I can think of. My last resort is to ask here for the advice of others. Im at my wits end here. Im hoping its something simple I am overlooking. I can't imagine what. Okay, scratch all that. Somebody pointed me to the new GUI for v1.2...
by subaru4wd
Tue Dec 16, 2014 10:39 pm
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 872
Views: 122609

Re: MultiWii OSD - MWOSD

Debogus wrote:My latest is a kv witespy mimimosd w/ 1.2 mwosd ,,,everything's working great....But I cant access the stick programing...What obvious thing did I miss....


Check and make sure you dont have low rates programmed on your transmitter. MWOSD needs to see full stick movement.
by subaru4wd
Tue Dec 16, 2014 9:01 am
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 872
Views: 122609

Re: MultiWii OSD - MWOSD

Ok this one has been stumping me for hours, and I have tried all I can think of. My last resort is to ask here for the advice of others. I have taken a break from MWOSD and Baseflight/MultiWii and have been using APM, with the MinimOSD-extra firmware... fonts... etc. Im getting ready to put a OSD an...
by subaru4wd
Thu Nov 20, 2014 7:55 pm
Forum: Shields, boards and sensors
Topic: Need help with ReadytoFlyQuads Bluetooth module.
Replies: 4
Views: 479

Re: Need help with ReadytoFlyQuads Bluetooth module.

Im having this exact same issue with several different bluetooth modules. I can pair and connect just fine using the EZGUI app, but immediately get No Data errors. Ive verified TX > RX and even swapped and made TX > TX to troubleshoot. No matter what, the moment I connect to the BT with my phone, th...
by subaru4wd
Sat Oct 25, 2014 6:21 am
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 207988

Re: Harakiri aka multiwii port to stm32

Mr-Fiero wrote:
Spotter6 wrote:I dont know where I got this, to give credit, but here is a diagram for connections to FLIP32+. Whoever made this diagram, Thank You! I use it all the time.


Credit goes to Truglodite. He's the one who created that wiring diagram :)
by subaru4wd
Wed Sep 24, 2014 6:52 am
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 872
Views: 122609

Re: MultiWii OSD - MWOSD

shikra wrote:Bugfix: removed option to exit OSD menu with low throttle. Conflicts with RSSI



THANK YOU!!! :)
by subaru4wd
Thu Aug 14, 2014 4:51 am
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 872
Views: 122609

Re: MultiWii OSD - MWOSD

Hi, I just installed my second MWOSD (kv from witespy hardware) on a 1s copter. I'm trying to read the voltage with the osd bat2 port (because bat1 is video for some reason ) and it's giving me 1.9 volts. I left everything default on the voltage tab except for testing between 3 cells and 1 cell. Th...
by subaru4wd
Sun Aug 03, 2014 9:26 am
Forum: Software
Topic: Cleanflight aka Multiwii port to STM32 F10x and F30x
Replies: 761
Views: 1337938

Re: Cleanflight aka Multiwii port to STM32 F10x and F30x

I'm really new to this and might make a fool of myself here. Firstly I have a naze32 and a naze acro. Wanted Gps for my hex with the naze32 then came across Harakiri. Couldn't seem to really get much info on how to flash it or to get it running. Then came across cleanflight and I have to say, it wa...
by subaru4wd
Thu Jul 31, 2014 7:44 pm
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 872
Views: 122609

Re: MultiWii OSD - MWOSD

Thanks for your work, shikra ! i use it with Naze32/Baseflight with UBLOX GPS and MinimOSD Hardware, works great ! only the ARMED/DISARMED display is not working - even with BASEFLIGHT definition compiled - so i removed_it /comment_out for now make sure you have Telemetry disabled in Baseflight, th...
by subaru4wd
Thu Jul 31, 2014 7:29 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 207988

Re: Harakiri aka multiwii port to stm32

Guys I have two silly questions: 1. why not implement the GPS part of Harakiri to Baseflight and make one FW to better and better.... ? yeah right. Go read what Timecop thinks about GPS functions, and how he treats others who try to contribute to his Baseflight. 2. is Harakiri stable enough to use ...
by subaru4wd
Mon Jul 21, 2014 7:37 pm
Forum: Software
Topic: Cleanflight aka Multiwii port to STM32 F10x and F30x
Replies: 761
Views: 1337938

Re: Cleanflight aka Multiwii port to STM32 F10x and F30x

My experience with the Flip32+ has been very positive so far - for my use the only thing missing is a built in inverter for the FrSky telemetry output. Really like having the +5V and GND next to the IO ports and RC inputs. My wiring for the Flip32+ was much tidier than on the Naze32 which has head ...
by subaru4wd
Sun Jun 29, 2014 9:56 pm
Forum: Getting Started - MultiWii config and setup
Topic: Please help, My quadrocopter takes off at the minimum rpm
Replies: 13
Views: 437

Re: Please help, My quadrocopter takes off at the minimum rp

in config.h

find the line: MINTHROTTLE

reduce the number and it should take care of your problem.
by subaru4wd
Mon Jun 16, 2014 5:32 pm
Forum: Getting Started - MultiWii config and setup
Topic: Can't get multiwii based quad off the ground with video
Replies: 5
Views: 215

Re: Can't get multiwii based quad off the ground with video

delray wrote:
subaru4wd wrote:Do a throttle range calibration on each ESC using the receiver, not the multiwii controller.


Im using dji opto escs and i dont think they support or require calibration. Something is keeping the motors from providing full thrust.


You should not have used DJI esc's.
by subaru4wd
Mon Jun 16, 2014 5:04 pm
Forum: Getting Started - MultiWii config and setup
Topic: Can't get multiwii based quad off the ground with video
Replies: 5
Views: 215

Re: Can't get multiwii based quad off the ground with video

Do a throttle range calibration on each ESC using the receiver, not the multiwii controller.
by subaru4wd
Mon Jun 16, 2014 4:59 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 621332

Re: Naze32 hardware discussion thread

Hey guys - just a quick question for the experts. I have been using the KK FC's for a while with varying results. I had a HK Multiwii Pro board and have just started playing with that FC - again with varying results. Everyone I see raves about the Naze32 and I will order one shortly however for the...
by subaru4wd
Mon Jun 16, 2014 4:53 pm
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 872
Views: 122609

Re: MultiWii OSD - MWOSD

@subaru / trug Here is a packaged version to try with the new witespy boards with config.h option preset. Also untested FASTPWM support for the RX units out there with high frequency refresh rates. If you guys use that would love to have it tested / verified m This is the WiteSpy version. It has so...
by subaru4wd
Thu Jun 12, 2014 2:53 am
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 872
Views: 122609

Re: MultiWii OSD - MWOSD

Do you have the most up to date Baseflight firmware?

Try uncommenting #DEFINE BOXNAMES which will make the OSD compatible with older MSP. That is typically what causes the problem you are encountering.
by subaru4wd
Thu Jun 12, 2014 2:50 am
Forum: Software
Topic: BASEFLIGHT WONT LOAD/BOOT INTO MY NAZE32
Replies: 20
Views: 5046

Re: BASEFLIGHT WONT LOAD/BOOT INTO MY NAZE32

here's a guide I wrote on flashing new firmware to the Flip32 board:
http://oddcopter.com/installing-firmwar ... ght-board/
by subaru4wd
Thu Jun 12, 2014 2:35 am
Forum: Software
Topic: BASEFLIGHT WONT LOAD/BOOT INTO MY NAZE32
Replies: 20
Views: 5046

Re: BASEFLIGHT WONT LOAD/BOOT INTO MY NAZE32

Again it came loaded from READYFLY Wait what, you're bitching about something from clonespy not working? No surprise there. Maybe you shoulda started your post with that bit of information. Timecop, why so snippy whats wrong with Readyfly? is this not a forum where people are to try and help others...
by subaru4wd
Tue Jun 10, 2014 7:24 pm
Forum: MultiWii tweaking - flying experience
Topic: Drifting in Acro, Leveling mode doesn't level much, HELP
Replies: 4
Views: 2181

Re: Drifting in Acro, Leveling mode doesn't level much, HELP

Forget about Deadlines.

Forget about Cost.

Forget about MultiWii for full Autonomous flight.
by subaru4wd
Tue Jun 03, 2014 7:00 pm
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 872
Views: 122609

Re: MultiWii OSD - MWOSD

Yes its the 328 chip.

I have my "good" witespy board on the bench right now not being used. I am waiting for some information from Truglodite and then I will use my meter to check resistances and compare them against his.
by subaru4wd
Tue Jun 03, 2014 6:25 pm
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 872
Views: 122609

Re: MultiWii OSD - MWOSD

I have an older witespy board that works great. All voltages read correctly, RSSI everything. I have a new witespy board I got this year and it too has the same problem Truglodite (and others) are having. Using the same code, same config, and same setup both battery voltages are almost 3 volts off, ...
by subaru4wd
Thu May 29, 2014 8:27 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 621332

Re: Naze32 hardware discussion thread

timecop wrote:
If it was flashed with "Sunday firmware" then it was a radio issue.


You cannot say that with 100% certainty.
by subaru4wd
Wed May 28, 2014 6:42 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 621332

Re: Naze32 hardware discussion thread

What radio system was he using? What version of the firmware? Was he using the Naze 32 failsafe or the receiver failsafe? Had either been tested? Lots of possibilities without more info. whatever firmware version the chrome app was set to flash on Sunday. No failsafe is set in Baseflight, this is a...
by subaru4wd
Wed May 28, 2014 5:17 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 621332

Re: Naze32 hardware discussion thread

I saw a mini quad with the latest baseflight available fly away on Sunday. The pilot armed the quad and gave it throttle... it took off and banked to the left and kept flying perfectly level, left, until it struck a rock. The entire time, the pilot had his throttle stick in the DISARM position. Soun...
by subaru4wd
Wed May 28, 2014 2:37 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 621332

Re: Naze32 hardware discussion thread

If you are so unhappy... quit Timecop.

Nobody here is twisting your arm or forcing you to do what you do.

Just stop. Stop today, go on vacation.


dont come back.
by subaru4wd
Wed May 28, 2014 2:04 am
Forum: Software
Topic: Cleanflight aka Multiwii port to STM32 F10x and F30x
Replies: 761
Views: 1337938

Re: Cleanflight aka Multiwii port to STM32 F10x and F30x

And what exactly would you know about kindness?
by subaru4wd
Wed May 28, 2014 1:20 am
Forum: Software
Topic: Cleanflight aka Multiwii port to STM32 F10x and F30x
Replies: 761
Views: 1337938

Re: Cleanflight aka Multiwii port to STM32 F10x and F30x

Im not a developer by any means. Im out of my league here by far. I am just an end-user who is expecting results. If you were to ask me, ALL code is a cluster fuck and makes absolutely no sense. Apparently, the only code worth running... is the code that comes from TimeCop. His shit must be so clean...
by subaru4wd
Wed May 28, 2014 12:57 am
Forum: Software
Topic: Cleanflight aka Multiwii port to STM32 F10x and F30x
Replies: 761
Views: 1337938

Re: Cleanflight aka Multiwii port to STM32 F10x and F30x

Just for the record, nobody really gives a fuck what you think Timecop. HUUUUUGE thanks to Dominic for releasing this code and doing his best to help out the 32 bit community. We need more dev's like this, and less devs like TimeCop! Exactly! We need more fragmentation and less developers actually ...
by subaru4wd
Tue May 27, 2014 10:48 pm
Forum: Software
Topic: Cleanflight aka Multiwii port to STM32 F10x and F30x
Replies: 761
Views: 1337938

Re: Cleanflight aka Multiwii port to STM32 F10x and F30x

Just for the record, I do not approve of the direction, file structure, or overall attitude of this particular fork, and specifically the waste of developer time that will ensue from this silliness. Just for the record, nobody really gives a fuck what you think Timecop. HUUUUUGE thanks to Dominic f...
by subaru4wd
Tue May 27, 2014 7:18 pm
Forum: Boards
Topic: FTDI to AfroMini???
Replies: 12
Views: 2568

Re: FTDI to AfroMini???

Not sure why you would power your board with both a BEC & the FTDI????

I powered the board using just my FTDI controller, set at 5v... and flashed it just fine.
by subaru4wd
Mon May 26, 2014 8:54 pm
Forum: Boards
Topic: Afromini don't arm
Replies: 10
Views: 1138

Re: Afromini don't arm

set MinCommand to 900
by subaru4wd
Fri May 23, 2014 4:08 pm
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 872
Views: 122609

Re: MultiWii OSD - MWOSD

tested and working very well, good job. i do have a question about the altitude, where does minimosd pull the altitude from? mine does not seem to display correctly, although it starts at 0 when i plug the battery in, when i take off alt starts to fluctuate and when i land osd shows anything from -...
by subaru4wd
Sun May 18, 2014 6:04 pm
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 872
Views: 122609

Re: MultiWii OSD - MWOSD

HFMan wrote:I'm getting a http 403 error trying to download R1.1- is there a permission problem on the web server?


I just tried and was able to download it.
by subaru4wd
Fri May 16, 2014 7:03 am
Forum: Software
Topic: Airplane RTH BaseFlight
Replies: 143
Views: 90971

Re: Airplane RTH BaseFlight

Im setting up an AfroMini for my FPV Plane. Im not sure exactly what servo's go where? It is a 3 channel plane, and I assume the motor ESC goes on THR, but i have two servo's for the Ailerons and one for Elevator and i am not sure which S pins to use for which.
by subaru4wd
Tue May 13, 2014 9:47 pm
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 872
Views: 122609

Re: MultiWii OSD - MWOSD

Can you try the latest 1.1 in downloads It compiles for me - but no idea if it works as not used that Unless its a conflict with something else enabled in config. I ran R1.1 on my OSD today. It compiled just fine but unfortunately I had a bad wreck on Saturday and fried my Flip32 board. I can't tes...
by subaru4wd
Tue May 13, 2014 12:01 am
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 872
Views: 122609

Re: MultiWii OSD - MWOSD

shikra wrote:Can you try the latest 1.1 in downloads

It compiles for me - but no idea if it works as not used that
Unless its a conflict with something else enabled in config.



sure thing. i will give it a try tonight or tomorrow.
by subaru4wd
Mon May 12, 2014 10:19 pm
Forum: Software development
Topic: MultiWii OSD - MWOSD
Replies: 872
Views: 122609

Re: MultiWii OSD - MWOSD

Hey Shikra. I tried using your latest beta code with Harakiri. Harakiri requires the Boxnames like 2.0/2.1... but when I enabled BoxNames in config.h, your code failed to compile.

Not sure what the deal was, i should have copied the error and pasted it here. Instead I just installed Baseflight.
by subaru4wd
Mon May 05, 2014 7:20 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 207988

Re: Harakiri aka multiwii port to stm32

yeah i dont fly with my mag enabled, and yesterday was my first flight with some new motors. I have a lot of tuning left to do, so i will report back once thats done. It was just the only complaint i had after a 7hr day of FPV :)
by subaru4wd
Mon May 05, 2014 5:39 am
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 207988

Re: Harakiri aka multiwii port to stm32

So today I got to fly a FULL day (7+ hours) of nothing but Quad FPV. I got to iron out a ton of bugs with my setup, and things were flying smooth. I am using Harakiri TestCode3 and I noticed when flying in pure manual mode... i would be cruising in a straight line hands off the sticks. Fast forward ...
by subaru4wd
Sun May 04, 2014 6:31 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 207988

Re: Harakiri aka multiwii port to stm32

Wow there are some great ideas in here!

I esepcially love the Failsafe information being sent to the OSD.

Hope to see some of these features in Harakiri soon :)
by subaru4wd
Sun May 04, 2014 6:26 pm
Forum: Boards
Topic: FTDI to AfroMini???
Replies: 12
Views: 2568

Re: FTDI to AfroMini???

Also, which set of TX/RX pins? I'm using serial port with included 5V and GND (thru holes) since the other ones are AFAIK not 5V tolerant And it will work with any 3.3 or 5V FDTI. I'm using SparkFun's one (meant for Arduino) and that one has 5 or 3.3V jumper/pads on the bottom (those change VCC and...
by subaru4wd
Sat May 03, 2014 7:54 pm
Forum: Boards
Topic: FTDI to AfroMini???
Replies: 12
Views: 2568

Re: FTDI to AfroMini???

Also, which set of TX/RX pins?
by subaru4wd
Sat May 03, 2014 5:45 pm
Forum: Boards
Topic: FTDI to AfroMini???
Replies: 12
Views: 2568

Re: FTDI to AfroMini???

I was not aware voltage traveled thru the TX/RX pins. Guess you learn something new every day.

If I set my FTDI from 5v to 3.3v does that also change the voltage of the RX/TX pins?

But now im getting conflicting information.... Where is timecop?
by subaru4wd
Sat May 03, 2014 9:19 am
Forum: Boards
Topic: FTDI to AfroMini???
Replies: 12
Views: 2568

Re: FTDI to AfroMini???

fiendie wrote:How about, you know, Rx and Tx...?


So no DTR is needed?

Also, there are two TX & RX pins/pads. Which ones do I use? The website says i need a USB> 3.3 serial cable. But the board accepts up to 16v?? so, i assume a 5v FTDI will be fine?
by subaru4wd
Sat May 03, 2014 9:07 am
Forum: Boards
Topic: FTDI to AfroMini???
Replies: 12
Views: 2568

FTDI to AfroMini???

So, i got me a couple of these cool AfroMini Naze32 boards.

I am looking in the manual, but nowhere does it mention where the FTDI connects. Can I use FTDI to flash this board, or what do I need?
by subaru4wd
Mon Apr 28, 2014 10:00 pm
Forum: Software
Topic: Harakiri aka multiwii port to stm32
Replies: 1502
Views: 207988

Re: Harakiri aka multiwii port to stm32

I flashed TestCode3 today and letting the quad sit for a few minutes outisde, I finally got a GPS lock.

Tracking 10 sats in my house. I might get a chance to do some test hovers in the front yard soon.