MultiWii

e_lm_70 wrote:...........

Detect that the copter is on the ground and upside down after a crash I guess is not something easy to detect.
....

Maybe detect the impact as a short high g-value... (just an idea)

I don't know if this is the right thread but anyways...my two friends have Naze32 rev4 boards. And for both of them GPS doesn't want to work. They have the latest BF FW - when you've introduced EMF avoidance setting. Both of them have neo6-m gps. But those GPS works on rev5 board. What could be the...

what is so hard to understand?? 5V >>> 3V!! 5V WILL kill 3V hardware POINT

strips wrote:
When I did a reset to defaults I got back 9600 baud and NMEA on my CN06 (NEO 6M).

yes so it is, but the baseflight doesnt like my module... somehow, i dont know
ill try again... and flashing baseflight again...
thx

scrat wrote:Connect your GPS to ucenter and reset it to default values. Then set in CLI gps_type=1 and gps_baudrate=0 or 1. That's it and gps must work. I have the same gps and it's working.

tried it, didnt work (or it does not reset completely)
thx

I would test different gps_type values. Maybe change to 0 or 2. I am not sure what's what as I haven't found a definitive list of the possible values. Why the fuck would you 'try' random shit??? m gps_type When feature GPS is enabled, configures type of connected GPS. NMEA=0, UBLOX=1, MTK(NMEA)=2, ...

I need a little help with my GPS please. I have an uBlox6 Neo6M V2 GPS module, I set in the parameters as described in https://code.google.com/p/afrodevices/wiki/CliSetVariables set gps_type=1 set gps_baudrate=0 feature gps but the GPS will not shown in the GUI as green. I use the latest baseflight...

ok, i forgot to write that i connected the battery...
so...
the copter was powered up with its battery for normal use.

I need a little help with my GPS please. I have an uBlox6 Neo6M V2 GPS module, I set in the parameters as described in https://code.google.com/p/afrodevices/wiki/CliSetVariables set gps_type=1 set gps_baudrate=0 feature gps but the GPS will not shown in the GUI as green. I use the latest baseflight ...

They are not pink! They are magenta!

I'm a bit confused with my new Afroflight Naze32 rev5. I've setup it as cppm and I've connected the FrsKy D8R-xp reciever. It works realy fine. Only one question: In which pin of the naze32 must I connect the rssi output pin of the reciever?. I'm using kv team osd r370 and would like to see the rss...

this is just...... ummm.... *missing words* :O

still roflmao'ing

YOU??? want to flash the ESCs with simonK??? ummm.. ok.....

could be a bit too heavy, but he could dismount some of the LEDs

ah ok

sorry, but i think you should buy a ready-to-fly system.... like... AR-Drone. A naze32 or similar is nothing for you.

roflmao

Hi. I've been using Baseflight for a while but thought I would give Harakiri a go to try RTH and PH. Position Hold has been working quite well in Baseflight but I like the idea of RTH for video link failures. Anyway I have successfully loaded the SG Pre2.6 to a Ver5 Naze32 but I'm having issues fro...

calibrate them!
use a 4-1 cable for exact results!

ok, since in baseflight my suggestion is "useless shit" for TC, i may ask here: is it possible to activate the one-pulse mode (one-shot) output of the STM? there are ESCs around who use it and it makes flying even more stable (tested with multiwii... it is a difference)

thanks for the answer, i feel better now...

Hi,

is it possible to activate the one-pulse mode output of the STM ?

thanks

i tried that already... mag doesnt work!

thanks, i changed the USB cable as well, but dont work.... and... the gyro/acc (MPU) needs a "2" to work correctly in my case, but i do not get the mag working correctly i tried all settings, nothing works, i think it is something wrong in general in the mag implementation ... so i had for...

Hello, i have a strange behavior of the Naze32V4 board. I can only flash firmware when i shorten the boot-loader pins (it never works with the "R-thing") AND when i shortened them and connect to USB the blue LED lit up and the green light a little bit (maybe half brightness) ... but i can ...

Thanks TC. That partly explains the weird compass stuff, maybe all of it. OK, I have done the Acc/Gyro reorientation. This image shows the new Acc and Gyro axis settings, might help somebody sometime. Numerically it makes little sense, but on the GUI all is now well, including the compass. Time to ...

but you have to activate alt-hold before you pull back throttle for autoland - or else......

Ok I did the midrc thingy in the cli and so far it seems to be ok (Thanks! ) when I lift off, it raises higher on the rear end, tilting forward, with just a slight touch of the right stick back will hold it even , I just need to get home to connect back up and adjust something, I'll have to do some...