MultiWii

postaL

first in line!

postaL

I think its time I look for another OSD to use. I guess so. I thought this was just a conversation. My mistake, I acknowledge that, and I will not post again. I think its time I look for another OSD to use. Precisely , you two are the guys I will love to see using other OSD Please do like so. Have ...

postaL

You forgot the motors.

You can PM me for paypal details

postaL

copterrichie wrote:I really like this and I hope TC is watching. This is what the PEOPLE wants, at least, this people.

Are the shields available also?

you aren't people. you're a person. a single, lonely person.

postaL

Goetz wrote:It is not reproduceable.... ...now again no vidout at all..... ((

If I had to guess, given your last post... You have a grounding issue.

postaL

If I can add a suggestion, For the ALT reading, add an option that will allow it to 0 on arm. ie: Sensor shows 539 ft when disarmed, when you arm and take off, your "home" point is 0 ft, instead of 539. Which MWii version are you using? I know that with an old MWii vers. at statup we had ...

postaL

If I can add a suggestion,

For the ALT reading, add an option that will allow it to 0 on arm.

ie: Sensor shows 539 ft when disarmed, when you arm and take off, your "home" point is 0 ft, instead of 539.

postaL

kataventos wrote:@PostaL

forgot to ask if you are using RSSI over MW?

Yes. And, I haven't calibrated the sensors yet, which is why it's off.

And don't mind richie, once a troll, always a troll.

postaL

Success!

Thank you KV for walking me through it.

It's setup w/ a Pixim Sealwolf camera, NTSC. I Imagine its a 4.3 screen.

Is there a way to reposition where things are on screen?

/me goes and reads wiki again.

postaL

Ok. I must have missed the whole "power w/ 12v on that side when uploading font" part. My mistake. It shows everything correctly now. It just doesn't show "ARMED" when armed, nor which flight mode i'm in. (with r345). I will try r340 to see if it has the same issue. richie, pipe ...

postaL

latest file that is on application.macOSX > data > MW_FONT_OSD.mcm

r345

edit: trying w/ r340 now.

postaL

copterrichie wrote:For one, you need to reload the fonts.

Loaded the font 3 times now :/

postaL

Making steps forward... baby steps, but steps none the less.

(side note: DISARMED doesn't go away when armed).

FYI, this is a RCtimer MinimOSD clone.

http://www.rctimer.com/index.php?gOo=go ... oductname=

postaL

Guess i'll try hooking both up and see if that helps. So, definitely that is your problem! on the wiki you have that information. The requests must be answered since start of communication or no communication at all Probably you read that on AP site. But, what went wrong with the char map upload? I...

postaL

If baseflight serial handler is the same as MW, then there is no reason it should not work. The MWC GUI works with baseflight right? It does. good point mr richie! (theCLAN!) I only have the tx from the FC, to the rx of the minimosd hooked up, as I read somewhere that since I wasn't looking to use ...

postaL

Hi, first of all take a look at the tutorials/Wiki... you don´t even have the correct char map installed. As for time-cop base-flight!!?? Our software is suppose to work with MW latest developments, we don´t use "private" base-flights to developments. EDIT: GU´s screen will have a new and...

postaL

Macbook air running 10.7.5.

Uploaded firmware ok.

GUI has a hiccup when changing the display property on items (on/off) and it updating in the preview area.

Doesn't seem to work w/ timecops Baseflight.

postaL

NOO!!!!!!

postaL

Added one more line for clarity. void setup() { Serial.begin(115200); Serial.println(uint8_t(127), BIN); Serial.println(int8_t(127),BIN); Serial.println(uint8_t(128), BIN); Serial.println(int8_t(-127), BIN); // <-Added Serial.println(int8_t(128),BIN); } // the loop routine runs over and over again ...

postaL

That really sucks ! So I am waiting my time asking questions on this forum . All I get is some poorly done sarcasm. You are no timecop that is for sure. At least time cop's sarcasm is entertaining . You need to do some more studying. Those are legitimate answers. ps. You're the one asking questions...

postaL

was this w/ the stock 2.4ghz setup? Yes, just about as stock as they come. If you're looking for a PPM setup, but want to keep your 9x... try the FrSky setup. I've made the switch, and I'm lovin' it. You may also try flashing a aftermarket firmware (er9x), and see if you can make sure that upon fai...

postaL

Found the freaking problem, on the Turnigy 9xBC version 2, when the RX looses signal, Channels Four and Channels five STILL output a signal. 1400-1500 Channel 4 and 1000-1024 Channel 5. Going to scrap this RX and get something that already have PPM and know to work. Freaking Junk. was this w/ the s...

postaL

So TC warned me about the aggression on this Forum but I see by your posts that you are not a technical contributor. I can tell by your post, (the first one), you came here to sell something. Sorry I called you out on this but my facts remain. 1) You did not port MW 2.1, you recanted and said basef...

postaL

Why should I connect the 5V at the moment the compiler is finished? Will 5V from FTDI be enough? Nils You should connect it the second it finishes compiling because he tells you to do so in the instructions. Seems he doesn't have a Arduino Bootloader on there which will throw the out of sync error ...

postaL

Is this video that has gone through a wireless transmission? (if yes, what setup) or is this direct feed to monitor from the mobidrone? also, when flashing firmware onto this board... it is kind of dumb. you have to connect the tx/rx/gnd, then, once you push the "UPLOAD" button in Arduino,...

postaL

I'm experiencing a problem that I cannot find a cure for. When armed, i can still make the menu come up by pressing roll right. How can I correct this? It's rather annoying. Thanks, M Hi, its problem with dev version of multiwii (stable multiwii 2.1 work fine). At the moment I getting started to wo...

postaL

I'm experiencing a problem that I cannot find a cure for.

When armed, i can still make the menu come up by pressing roll right. How can I correct this? It's rather annoying.

Thanks,
M

postaL

copterrichie wrote:Hey guys, this is a little off topic but...

You should start all your posts with this.

ps. the CLAN is WATCHING.

postaL

copterrichie wrote:
postaL wrote:Nor will you ever be. We tend to ban trolls.

Nor will I support or promote CLAN products Ha!!

Good. Now leave.

postaL

copterrichie wrote:
crazyal wrote:yeah you definitely are a blogger/SPAMMER

BUT, I am not a member of the CLAN. Ha!

Nor will you ever be. We tend to ban trolls.

postaL

copterrichie wrote:LOL, Oppose the CLAN, get BASHED. OBVIOUS!

You are obviously not in your right mind. And for that, I feel sorry for you.

#8bittrash on freenode.

postaL

Richie, I think this all stems from not having a cool code nickname that we use to refer to hamburger, if if makes you feel any better we have come up with one, which is very close to copterrichie (and its not coptersnitchy, promise). 4:55:01 AM ReadError: lol 4:55:11 AM ReadError: jamie hyneman do...

postaL

7:10:39 AM fiendie: i.e. made configurable 7:10:42 AM dongs: ^ 7:11:51 AM fiendie: I really think the ghetto board could be good for baseflight adoption 7:12:46 AM fiendie: But we really need a contingency plan in the event that shitburger wants to jump on the bandwagon. 7:13:43 AM dongs: shitb...

postaL

Clan? What high horse are you sitting on? It's a IRC channel about the #multiwii flight controller. How is being in there, and not on the forum all the time, a bad thing? As someone who has been in the channel for a while now, and not once seen you join, contribute, or even say a peep, not once... a...

postaL

Not sure exactly wtf you're talking about, since I'm in #multiwii on freenode, and there is no bitching going on in there. Only project development. Now, get off your high horse and go do some work. BS but you have a right to an opinion what every that may be. Coming from someone whom isn't even in...

postaL

Not sure exactly wtf you're talking about, since I'm in #multiwii on freenode, and there is no bitching going on in there. Only project development.

Now, get off your high horse and go do some work.

MultiWii

Search found 36 matches

Re: OSDONGS

Re: SW Development on Minim Osd

Re: Multiwii Mega 2560 and QBrain 4x20A ESC. Pay for Help

Re: 32bit MW Centric ProMini...

Re: SW Development on Minim Osd

Re: SW Development on Minim Osd

Re: SW Development on Minim Osd

Re: SW Development on Minim Osd

Re: SW Development on Minim Osd

Re: SW Development on Minim Osd

Re: SW Development on Minim Osd

Re: SW Development on Minim Osd

Re: SW Development on Minim Osd

Re: SW Development on Minim Osd

Re: SW Development on Minim Osd

Re: SW Development on Minim Osd

Re: SW Development on Minim Osd

Re: HELP!!!!!!!!!!

Re: Release 2.2 is coming

Re: Naze32 hardware discussion thread

Re: Failsafe and Sum-PPM

Re: Failsafe and Sum-PPM

Re: MultiWii Port to STM32F4 (UAVXArm32F4)

Re: mobiDrone nano arduino OSD for MultiWii with PID config

Re: mobiDrone nano arduino OSD for MultiWii with PID config

Re: mobiDrone nano arduino OSD for MultiWii with PID config

Re: mobiDrone nano arduino OSD for MultiWii with PID config

Re: Direct Frsky telemtry data from MW FC

Re: STM32F3DISCOVERY , a flight controller for US$10

Re: STM32F3DISCOVERY , a flight controller for US$10

Re: Community fragmentation

Re: Community fragmentation

Re: Community fragmentation

Re: Community fragmentation

Re: Community fragmentation

Re: Community fragmentation