MultiWii

Uhm... is there a way to have the board beep during arm/disarm with motor_stop enabled....?

First the afros and now this... just awesome....f'me....

Did i cut you off on the highway somewhere?

Yo... flashed my ver 4 to 5 or whatever the last one is... have arming mapped to a switch and now i can disarm in flight wassup with that?

MoRaLeSD wrote:This is great I will order one! Any suggestions about the Pin Header Type or Solder Pin Headers?

You'll want 90's for a low profile...and if you're just acro you only need to solder in four rows... i always remove the positive pins for row 2-3-4 so i don't have to mod the esc's servo connectors.

Eh... need the mag for gps... seems to calibrate fine in the gui so i don't getcha.

Thought it was interference from motors and power supply that skews the reading.... sure looks that way as the drift matches the throttle input. <shrug>

Hey TC or anyone... the mag drifts about 12 degrees in total on throttle up.... i'm pretty sure it's causing a slight oscillation that i can't tune out with the PID's during poshold... anyway to filter that?

thx...

Can I please ask what is the difference in Acro Naze32 and the Naze 32? I know that there is lack of magnetometer and pressure control, is this going to effect the acrobatic style of flying if I get NOT the Acro Naze32? The video I saw doing the cool flying with this FC is this one: [vimeo]http://w...

I got it working at least to my needs... no bumps when engaging during descending or ascending flight... smooth transition to level flight no more jackrabbit.

Baro is in a seal blacked out delrin case.

P 2.5
I .045
D 20

Have a nice day...

Meh.... didn't see much of difference to be honest.... maybe a slightly better alt lock..... at least it didn't sledgehammer....

No acc_type in CLI so where is the option?

Hey thx... just mounted a gps on my Tarot 650 and fiddling with alt and pos hold....

Plugged the crius V1 into channels 3 and 4 for TX and RX. The manual states pin 3 is TX and 4 RX. As RX plugs to TX and vice versa i have plugged the RX of my GPS into pin 3 and the TX into pin 4. I presume this is right? I've tried it the other way around just in case and that didn't seem to help....

I have a new build that requires an OSD and gps unit as well....

Thx for the great customer support yesterday TC... sorry to pollute the thread with non essentials... but i just had to say.

thx....