MultiWii

Thought I'd as but can you tell me if the following work ok with Navi b5 on the Crius AIOP v2 board as I'm having a few issues; Buzzer Voltage Monitor PPM (CPPM) with an FRSKY D8R-XP Many thanks I actually fly with such a config. HI, I'm also work with navi b5 , AIOP V1 4S battery with voltage divi...

Do post

After having abandoned MultiWii for a while in favour of Megapirate, I flashed MW2.3-nav yesterday (thanks to EOSBandi) on my AIOP, because I finally wanted the responsiveness and pure awesome control of MW back to my Dex Mini Quad. After about two minutes of pid tuning it felt already much better ...

HI EOSBandi,

Just test the 2.3 b-5, testing with SET_HEADING command and I think it had reversed by 180 degree.
trying to fix with wrap angle 180. it's OK now

Ok guys. Beta5 of the navi code is out, and also the Pre8(b5) of the WinGUI. CAUTION ::: when using autoland! ALWAYS disarm your copter manually too, and switch off MISSION or LAND mode before approaching your landed copter !!!!! Quick summary of changes " WinGUI Added geofence //todo: draw fe...

Hi EOS,

just suggest, can you add some progress bar when upload the mission
and then about RSSI maybe this can be the option

http://www.codeproject.com/Articles/512 ... ntrol-in-C

thanks

Hi EOS

I just zooming both in and out and sometimes pan the map, like I said, not every zoom or pan event give error message.
I use the newest one b4

thanks

Hi EOS

some time (often ) when I navigate through mission map I get this error message, not sure if this a bug or not, just close and reopen the WinGUI

Hello! I tried to load the firmware radio ~ hm_trp.ihx on the two radio modules 3dr but I do not understand how do it. Where the files should be placed? I might have a little help? thanks Perry Hi perry, you should use newest 3dr radio software, then you choose "upload custom fimware" the...

Thats awesome EOS,

SiK-mW 2.3 - A customized firmware for 3DR radio telemetry modules to use with MultiWii.

Hi, about your customize firmware for 3DR radio, is it possible to flash using 3DR Radio Config ?
thanks

Hi, is any one have experience with altitude increase while perform althold.
actually my bird keep rising if BARO mode is activated and copter is moving, e.g move the stick in BARO mode or RTH mode.
Baro already covered by cotton and sponge

Ok got ucenter to read it. and this is what it looked like. Its way off on long/lat. Not really sure what to do with it from here https://sphotos-a.xx.fbcdn.net/hphotos-prn1/522110_10200509434410381_191147420_n.jpg Hi can you check the result of the test ?, I mean you can use google earth along wit...

Hi, I had my first flight this afternoon with FBL head and normal mode , after setting up PID for roll and nick (P=3 /I=0.01/ D=10 ) and smoothing (20,20,4) . For the yaw, I kept my GY401 working ( not everthing at the same time step by step ). There're some little jerks for rapid movement but it's...

Hi Patrik

How about if we use governor (mine GV-o1) for throttle control in gasser ?
its kinda parallel throttle input into governor and multiwii board, any idea ?

Hi, is anyone had tried to big size heli, ex 700 size

Hi NotungX, could this improvement applied to BMP085 ?

Hi,,, is there any issue about copter gone up when RTH nav, some time my X quad gone crazy if tilt angle or speed to high on RTH mode. recently I used I2C_GPS_NAV latest from pm1. Nothing known... The speed should be limited to 6m/s, the max bank angle to 30 degrees. But what means "gone crazy...

Hi,,, is there any issue about copter gone up when RTH nav, some time my X quad gone crazy if tilt angle or speed to high on RTH mode.
recently I used I2C_GPS_NAV latest from pm1.

Hi ......
Is there any issue about copter going to up, when navigating like RTH ?, like speed nav to fast or any effect from ALT_HOLD ?

Dear all, newbie here... I test mahowik code ms5611_IMU.ino with CRIUS SE v1.0 board, hey this really work on BMP085 sensor
my set was 5.0 0.01 30. Is there any suggest PID tune for better AH, thanks
This my video http://www.youtube.com/watch?v=xLcWT_O1nyg