MultiWii

Change under Tools/Board and select Arduino 2560

Hi oterporter, I saw on your video that you don't see the octocopter on the right on multiwiiconf, only dot with an arrow, and also there are no motor output bars next to the transmitter readings. Is this normal, or it came with your problem with the TX?? I am seeing the same, but everything works f...

Hi guys, I have built an octocopter, but on the multiwiiconf 2.2, 2.1 (I didn't tested on later versions) I don't see the octocopter like I was seeing the quad or tricopter on the right on the multiwii Configurator, it shows only one dot with an arrow like its not connected, but it is. The bars that...

I have GY-80 with L3G4200 and ADXL345 on a quad, the copter flies but it twitches a little and drifts sometimes so what are correct PID settings or do I have to increase the LPF factors for the gyro and acc? I just defined gy-80 and made the adress change. Current PIDs are from mahowik

I have GY-80 with L3G4200 and ADXL345 on a quad, the copter flies but it twitches a little and drifts sometimes so what are correct PID settings or do I have to increase the LPF factors for the gyro and acc?
Current PIDs are from mahowik
ROLL/PITCH 6.0-0.03-40 , YAW 8.5-0.045, LEVEL 7.0-0.01