MultiWii

Well, as some people know, i have make the first MOD to QUAX frmware work with towerpro 30 and 40 amp (i2c version). 2 weeks ago i am searching for news about DIY ESC firmware and find Wii-ESC firmware. This is the best i ever used. i am a bit confused about "what i will use to compile the firm...

Hi Ziss,
i make some tests and one ESC work fine ... all other work very, very hot.
I will order some low ESR caps.

Sim, i not used power supply or lamp bulb because i beliave the firmware work good as i tested in other ESCs.

ziss_dm wrote:Hi agressiva,

Is it tp_nfet fw? And TowerPro with BL8003 FET drivers and all n-FETs?
Theoretically should work: http://forums.openpilot.org/topic/11561 ... ntry141323

regards,
ziss_dm

Exactly this Ziss.
the link from openpilot are broken : http://wii-esc.googlecode.com/files/tp_ ... m_test.zip

Anyone using towerpro 30amp complementary PWM ?
The ESC work some seconds with strange SYNTH sound then the capacitors (100uf/25v) explode.

I tried 3 esc and all have the same problem.

i have another 8 hobbyking 20amp esc working fine with complementary PWM.

Here are my modification to VTOL...
http://www.youtube.com/watch?v=2iZoVY2fehM

Well, i have a PLANK wing that do a Vertical take-off and fly like wing . For now i am using the acro mode but i am working in Stabilization mode. Does anyone know how to do a 90deg rotation in IMU ? without changing the sensor positions ? IN full DCM IMU its possible but in multi-wii i dont know. I...

Can you share the center plate model ?