Search found 23 matches

by tcarnal
Mon Nov 05, 2012 5:20 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

A simple LiPo alarm wil sufice and please flash those ESC's with SimonK The newer Plush don't use Atmel', do they? actually i don't know if the new Plush ESC's are using Atmel. I didn't even know there where "new" ones. The "old" ones flashed real nice Edit: Looks like your righ...
by tcarnal
Sun Nov 04, 2012 10:08 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

A simple LiPo alarm wil sufice and please flash those ESC's with SimonK :) that wil rock your life

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=18987
by tcarnal
Sun Nov 04, 2012 9:11 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

Do you have SimonK firmware on your ESC's
If not this sounds like power cut-off from ESC's when power is to low.
you stated that you have flown for 15 to 20 minutes
by tcarnal
Sun Oct 28, 2012 11:55 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

nicog wrote:thank you. you have the latest right? the one I made on 10 october or so... You should have a dropdown list with baud rates next to com...


Yep did a search in this topic and found a direct link.

thx
by tcarnal
Sun Oct 28, 2012 10:10 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

You mean in windows GUI. Tcarnal, are you using eosbandi GUI?. This soft is not up to date and won't show true right switches. You need to use multi wi conf or naze32 aio from me. Switch are now dynamic so..... I Use MultiWiiWinGui 2.1 But i understand that this version isn't the right version anym...
by tcarnal
Sat Oct 27, 2012 11:05 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

Found the issue,

Arm isn't Arm anymore
Need to set RTH this is Arm in the MultiWiiGui.

al is working now.
by tcarnal
Sat Oct 27, 2012 9:47 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

Hi Lapino,

Those are the first things i checked
Motor_stop is enabled

I can arm it using the stick move but not with a switch

before i used the last stable version and this worked with the switch.
I mouted the switch to the arm funtion.
by tcarnal
Sat Oct 27, 2012 4:55 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

Hi All. Just flashed my Acro Naze 32 with the r234. And my engines won't respond. I have my quad connected to the MultiWii Gui and al seems to work. But when i arm the board (light turns on in the software) and i throttle up the engines won't spin and the MultiWii software doesn't show any engine ac...
by tcarnal
Sat Oct 13, 2012 7:00 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

ruffster wrote:Brill - thank you

timecop wrote:For flyingwing stuff, i've made some small prototypes for PPM input w/mpu6050 and baro:
http://i.imgur.com/GEIUA.jpg


I hope you do a batch of those I'd love a couple!


That sure is a nice small board :) perfect for a small quad :)
by tcarnal
Thu Oct 11, 2012 7:28 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

Is there a preferred bluetooth adapter to use with the android configurator? I use this one http://www.geekmag.fr/naze-32-test-et-configuration-de-la-fc-abusemark/2/ and used this to configure it correctly (Needed RS232 > TTL converter) http://www.rasmicro.com/Bluetooth/EGBT-045MS-046S%20Bluetooth%...
by tcarnal
Sat Sep 29, 2012 11:08 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

yes, you can mirror aux1..4 to the RC pins 5..8 by setting gimbal_flags=8 in cli, however if you're using a fullsize receiver like D8R or similar, you can just connect regular servo connectors to channels 5,6,7 (while keeping PPM on channel 8) and it works as expected. I'm doing so also. Cppm and p...
by tcarnal
Sat Sep 29, 2012 8:11 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

Hi All, A completely diferent question, (not GPS) I am using Frksy with cppm and al seems to work good (after reading about the problemes with the cppm timing of Frsky and more than 6ch http://diydrones.com/profiles/blogs/why-frsky-cppm-signal-is-so-disappointing ) Anyway i was wondering if it where...
by tcarnal
Fri Sep 28, 2012 5:51 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

Sleeping ?? you??

Thought you were alway's online :)

Kidding :P
by tcarnal
Fri Sep 28, 2012 5:39 am
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

Just looked at it and it looks like there are right now :)
•6 Units in Stock
by tcarnal
Sun Sep 23, 2012 11:04 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

Found the problem :oops:

Faulty wirering

Sorry TC for ever doubting your amazing board.
by tcarnal
Sun Sep 23, 2012 9:51 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

Seems to be something wrong with the flight controller.
I have second one (Naze32 withoud baro and magno) with the same firmware connected the same way and this one is working like it shoot.

Someone an idea?

both flight controllers have never been used until today

thx
Thijs
by tcarnal
Sun Sep 23, 2012 9:24 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

Hi all, I am sure this is just something i am overseeing but i have a small problem regarding my engines. I finally received my X9 with FRSky Tx and Rx and i am using PPM. My Naze32 (green one) is using the lastes stable BaseFlight (july 25th) When i connect the flight controller to the MultiWii sof...
by tcarnal
Mon Sep 10, 2012 2:09 pm
Forum: General discussions
Topic: AFRO FC
Replies: 3
Views: 3007

Re: AFRO FC

Lets just Say

RTFM :)
by tcarnal
Fri Sep 07, 2012 2:11 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

Aah oke i am all but a programmer :)

thx
by tcarnal
Fri Sep 07, 2012 1:58 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

Just out of curiosity

What's the diferents between the baseflight and the baseflightplus?
I wasn't able to find an answer on the big bad internet.
by tcarnal
Fri Sep 07, 2012 1:13 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

That's great news :)

When do you think this is available?
Can't wait for my transmitter to arrive.
Just sold my DX6i and my hands are itching :)

thx
by tcarnal
Fri Sep 07, 2012 12:47 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

Hi all, I have a Question about Telemetry, I have a Turnigy 9x with Frsky on its way and have found al the things i need to do to make Telemetry working from my Naze32. The FrSky converter from AbusMark (TC) is already mounted on. One thing is just not clear to me there was alot of info on the Telem...
by tcarnal
Tue Sep 04, 2012 7:59 pm
Forum: Boards
Topic: Naze32 hardware discussion thread
Replies: 3249
Views: 1377895

Re: Naze32 hardware discussion thread

timecop wrote:
doughboy wrote:just curious as to why this cannot be used with any of the dji frames.
thanks


Mostly because I said so, and also because the frames are vibrating, heavy pieces of plastic trash.


Hehehehehe just as i thought :)